/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 1996 Sun Microsystems, Inc.  All Rights Reserved
 *
 * module:
 *      messages.h
 *
 * purpose:
 *      contins defines for all localizable messages
 *
 * notes:
 *      unless otherwise specified, all %s arguments can be assumed
 *      to be file names.  Non-obvious arguments are explained in
 *      comments.
 */

#ifndef _MESSAGES_H
#define _MESSAGES_H

#ifdef  __cplusplus
extern "C" {
#endif

#include <libintl.h>

/*
 * summary output messages
 */
#define SUM_hd          "RECONCILE %s and %s (%d files)\n"
#define SUM_dst         "\t-> %4d copies, %4d deletes, %4d ownership\n"
#define SUM_src         "\t<- %4d copies, %4d deletes, %4d ownership\n"
#define SUM_unresolved  "\tUNRESOLVED CONFLICTS: %d\n"

/*
 * verbose mode analysis commentary
 */
#define V_nomore        "# file %s no longer exists\n"
#define V_deleted       "# file %s deleted from %s\n"   /* src/dst */
#define V_created       "# file %s created on %s\n"     /* src/dst */
#define V_delconf       "# file %s has been deleted and changed\n"
#define V_trunconf      "# file %s has been truncated and changed\n"
#define V_unchanged     "# file %s has two identical versions\n"
#define V_different     "# file %s has two different versions\n"
#define V_modes         "# file %s has changed modes/ownership\n"
#define V_changed       "# file %s has been modified\n"
#define V_renamed       "# file %s has been renamed to %s\n"
#define V_prunes        "# %d stale entries pruned from baseline\n"
#define V_nostat        "# WARNING: unable to stat file %s\n"
#define V_change        "# WARNING: file %s on %s, was <%ld,%ld>#%ld, now <%ld,%ld>#%ld\n"
#define V_suppressed    "# file %s not reconciled due to halt-on-error\n"

/*
 * usage messages
 */
#define ERR_usage       "Usage:"
#define USE_a           "always check for Access Control Lists"
#define USE_e           "everything must agree (modes, owner, group)"
#define USE_h           "halt immediately after a file propagation error"
#define USE_m           "modification times should be preserved"
#define USE_n           "no touch (do not change any files)"
#define USE_q           "quiet    (do not list reconciliation commands)"
#define USE_v           "verbose  (commentary on each changed file)"
#define USE_y           "yes      (do not prompt for confirmations)"
#define USE_s           "source directory for new rules"
#define USE_d           "destination directory for new rules"
#define USE_r           "restrict reconciliation to specified directories"
#define USE_f           "force conflicts to resolve in favor of src/dst/old/new"
#define USE_o           "one-way: only propagate changes from src/dst"

/*
 * These are the basic usage scenario line, and in most cases should not
 * be translated.
 */
#define USE_simple      "[-mnqv] -s dir -d dir file ..."
#define USE_all         "[-aehmnqvy] [-r dir] [-f src/dst/old/new] [-o src/dst]"

/*
 * error messages
 */
#define ERR_open        "ERROR: cannot open %s file %s\n"
#define ERR_creat       "ERROR: unable to create %s file %s\n"
#define ERR_write       "ERROR: write error in %s file %s\n"
#define ERR_fclose      "ERROR: error in flushing and closing %s file %s\n"
#define ERR_chdir       "ERROR: unable to chdir to %s\n"
#define ERR_rename      "ERROR: unable to rename %s file %s to %s\n"
#define ERR_lock        "ERROR: unable to lock %s file %s\n"
                        /*
                         * first %s argument is "rules" or "baseline"
                         */
#define ERR_badinput    "ERROR: invalid input at line %d, %s in %s\n"
                        /*
                         * first %s argument is a the name of the offending
                         * field (e.g. "mode" or "major dev").  The last
                         * %s argument is the name of the file being
                         * processed.
                         */
#define ERR_badver      "ERROR: bad version (%d.%d) found in %s file %s\n"
                        /*
                         * second %s is "rules" or "baseline"
                         * last %s is file name
                         */


#define ERR_nocwd       "ERROR: unable to get working directory for %s\n"
#define ERR_longname    "ERROR: excessively long name %s\n"
#define ERR_undef       "ERROR: undefined variable %s\n"
#define ERR_deep        "ERROR: directory tree is too deep at directory %s\n"

#define ERR_badopt      "ERROR: unrecognized option -%c %s\n"
                        /*
                         * the %c argument is the offending flag
                         * (e.g. -f or -o) and the %s is the argument
                         * that followed it.
                         */

#define ERR_nofsync     "ERROR: unable to find rule and baseline files\n"
#define ERR_badbase     "ERROR: invalid BASE directory %s\n"
#define ERR_nosrc       "ERROR: no source directory specified\n"
#define ERR_nodst       "ERROR: no destination directory specified\n"
#define ERR_nonames     "ERROR: no file/directory names specified and no rules file found\n"
#define ERR_tomany      "ERROR: only %d -r arguments allowed\n"
#define ERR_rdwri       "ERROR: cannot read/write file %s\n"
#define ERR_dirwac      "ERROR: cannot create files in directory %s\n"
#define ERR_nomem       "ERROR: unable to allocate memory for %s\n"
                        /*
                         * the %s argument is the name of a data structure
                         * that could not be allocated.  It is only useful
                         * for telling the support person over the phone.
                         */

#define ERR_badrun      "ERROR: bad exit code from %s\n"
                        /*
                         * argument is a command from the rules file
                         */

#define ERR_cannot      "ERROR: %s %s\n"
                        /*
                         * The first %s argument will be a PROB_ string.
                         * The second %s argument is the file we were
                         * trying to do it to.
                         */

#define ERR_abort_h     "ERROR: aborting because of propagation failure\n"

#define WARN_ignore     "WARNING: ignoring LIST rule for %s (illegal '.', '..', or '/')\n"
#define WARN_noacls     "WARNING: ACLs are not supported for file %s\n"
#define WARN_deletes    "WARNING: this operation might delete %d files\n"
#define WARN_rmdirs     "WARNING: operation might delete %d non-empty directories\n"
#define WARN_ichange    "WARNING: %d listed directories have changed Inode #s\n"
#define WARN_proceed    "Press Enter to confirm, or interrupt to abort\n"
#define WARN_super      "NOTE: there are ownership and protection conflicts that can only be\n      resolved by the super user\n"

/*
 * descriptions of problems in unreconcilable files
 */
#define PROB_del_change "deleted and changed"
#define PROB_different  "two different versions"
#define PROB_ownership  "different owners"
#define PROB_protection "different protections"
#define PROB_prohibited "blocked by -o switch"
#define PROB_aborted    "aborted by -h switch"

#define PROB_chown      "unable to chown"
#define PROB_chgrp      "unable to chgrp"
#define PROB_chmod      "unable to chmod"
#define PROB_chacl      "unable to setfacl"
#define PROB_link       "unable to link"
#define PROB_unlink     "unable to unlink"
#define PROB_rmdir      "unable to rmdir"
#define PROB_copy       "unable to copy"
#define PROB_mknod      "unable to mknod"
#define PROB_mkdir      "unable to mkdir"
#define PROB_readlink   "unable to read symlink"
#define PROB_symlink    "unable to create symlink"
#define PROB_restat     "unable to stat/restat"
#define PROB_deal       "unable to deal with"
#define PROB_copyin     "unable to open changed file"
#define PROB_copyout    "unable to create new file"
#define PROB_botch      "unable to safely setfacl"
#define PROB_rename     "unable to rename"
#define PROB_rename2    "unable to rename/create"
#define PROB_read       "read error"
#define PROB_write      "write error"
#define PROB_space      "insufficient space to copy"


/*
 * text snippets
 */
#define TXT_src         "source"                        /* for WARN_change   */
#define TXT_dst         "destination"                   /* for WARN_change   */
#define TXT_srcdst      "missing source/destination"    /* for ERR_bad_input */
#define TXT_noargs      "missing arguments"             /* for ERR_bad_input */
#define TXT_badver      "invalid version number"        /* for ERR_bad_input */
#define TXT_nobase      "LIST without a BASE"           /* for ERR_bad_input */
#define TXT_rules       "rules"                         /* for ERR_bad_ver   */
#define TXT_base        "baseline"                      /* for ERR_bad_ver   */

#ifdef  __cplusplus
}
#endif

#endif  /* _MESSAGES_H */