/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 1995-1999 by Sun Microsystems, Inc. * All rights reserved. */ #include <sys/types.h> #include <sys/systm.h> #include <sys/user.h> #include <sys/buf.h> #include <sys/file.h> #include <sys/uio.h> #include <sys/conf.h> #include <sys/stat.h> #include <sys/autoconf.h> #include <sys/vtoc.h> #include <sys/dkio.h> #include <sys/ddi.h> #include <sys/sunddi.h> #include <sys/ddi_impldefs.h> #include <sys/kstat.h> #include <sys/kmem.h> #include <sys/modctl.h> #include <sys/kobj.h> #include <sys/pctypes.h> #include <pcmcia/sys/cs_types.h> #include <pcmcia/sys/cis.h> #include <pcmcia/sys/cis_handlers.h> /* * * The following speed tables are used by cistpl_devspeed() to generate * device speeds from tuple data. * * Define the device speed table. For a description of this table's contents, * see PCMCIA Release 2.01 Card Metaformat pg. 5-14 table 5-12. * * All times in this table are in nS. */ uint32_t cistpl_devspeed_table[CISTPL_DEVSPEED_MAX_TBL] = { 0, /* 0x00 - DSPEED_NULL */ 250, /* 0x01 - DSPEED_250NS */ 200, /* 0x02 - DSPEED_200NS */ 150, /* 0x03 - DSPEED_150NS */ 100, /* 0x04 - DSPEED_100NS */ 0, /* 0x05 - reserved */ 0, /* 0x06 - reserved */ 0 /* 0x07 - use extended speed byte */ }; /* * Define the power-of-10 table. */ uint32_t cistpl_exspeed_tenfac[] = { 1, /* 10^0 */ 10, /* 10^1 */ 100, /* 10^2 */ 1000, /* 10^3 */ 10000, /* 10^4 */ 100000, /* 10^5 */ 1000000, /* 10^6 */ 10000000 /* 10^7 */ }; /* * The extended device speed code mantissa table. * * This table is described in PCMCIA Release 2.01 Card Metaformat * pg. 5-15 table 5-13. * * The description of this table uses non-integer values. We multiply * everything by 10 before it goes into the table, and the code * will divide by 10 after it calculates the device speed. */ uint32_t cistpl_devspeed_man[CISTPL_DEVSPEED_MAX_MAN] = { 0, /* no units */ 10, /* no units */ 12, /* no units */ 13, /* no units */ 15, /* no units */ 20, /* no units */ 25, /* no units */ 30, /* no units */ 35, /* no units */ 40, /* no units */ 45, /* no units */ 50, /* no units */ 55, /* no units */ 60, /* no units */ 70, /* no units */ 80, /* no units */ }; /* * The extended device speed code exponent table. * * This table is described in PCMCIA Release 2.01 Card Metaformat * pg. 5-15 table 5-13. * * The description of this table uses various timing units. This * table contains all times in nS. */ uint32_t cistpl_devspeed_exp[CISTPL_DEVSPEED_MAX_EXP] = { 1, /* 1 nS */ 10, /* 10 nS */ 100, /* 100 nS */ 1000, /* 1000 nS */ 10000, /* 10000 nS */ 100000, /* 100000 nS */ 1000000, /* 1000000 nS */ 10000000 /* 10000000 nS */ }; /* * The power description mantissa table. * * This table is described in PCMCIA Release 2.01 Card Metaformat * pg. 5-28 table 5-32. * * The description of this table uses non-integer values. We multiply * everything by 10 before it goes into the table, and the code * will divide by 10 after it calculates the device power. */ uint32_t cistpl_pd_man[] = { 10, /* no units */ 12, /* no units */ 13, /* no units */ 15, /* no units */ 20, /* no units */ 25, /* no units */ 30, /* no units */ 35, /* no units */ 40, /* no units */ 45, /* no units */ 50, /* no units */ 55, /* no units */ 60, /* no units */ 70, /* no units */ 80, /* no units */ 90, /* no units */ }; /* * The power description exponent table. * * This table is described in PCMCIA Release 2.01 Card Metaformat * pg. 5-28 table 5-32. * * The description of this table uses various voltage and current units. * This table contains all currents in nanoAMPS and all voltages * in microVOLTS. * * Note if you're doing a current table lookup, you need to multiply * the lookup value by ten. */ uint32_t cistpl_pd_exp[] = { 10, /* 10 microVOLTS, 100 nanoAMPS */ 100, /* 100 microVOLTS, 1000 nanoAMPS */ 1000, /* 1000 microVOLTS, 10000 nanoAMPS */ 10000, /* 10000 microVOLTS, 100000 nanoAMPS */ 100000, /* 100000 microVOLTS, 1000000 nanoAMPS */ 1000000, /* 1000000 microVOLTS, 10000000 nanoAMPS */ 10000000, /* 10000000 microVOLTS, 100000000 nanoAMPS */ 100000000 /* 100000000 microVOLTS, 1000000000 nanoAMPS */ }; /* * Fill out the structure pointers. */ cistpl_devspeed_struct_t cistpl_devspeed_struct = { cistpl_devspeed_table, cistpl_exspeed_tenfac, cistpl_devspeed_man, cistpl_devspeed_exp, }; cistpl_pd_struct_t cistpl_pd_struct = { cistpl_pd_man, cistpl_pd_exp, }; /* * Some handy lookup tables that should probably eventually be * done away with. * * These are used mostly by the CISTPL_CFTABLE_ENTRY tuple handler. */ uint32_t cistpl_cftable_io_size_table[] = { 0, 1, 2, 4, }; uint32_t cistpl_cftable_shift_table[] = { 0, 8, 16, 24, }; /* * List of tuples in the global CIS to ignore if they show * up in both the global and function-specific CIS lists. * This list MUST end with CISTPL_NULL. */ cistpl_ignore_list_t cistpl_ignore_list[] = { CISTPL_FUNCID, CISTPL_FUNCE, CISTPL_CONFIG, CISTPL_CFTABLE_ENTRY, CISTPL_NULL /* list must end with CISTPL_NULL */ };
