root/usr/src/uts/common/io/sfxge/common/hunt_nic.c
/*
 * Copyright (c) 2012-2015 Solarflare Communications Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * The views and conclusions contained in the software and documentation are
 * those of the authors and should not be interpreted as representing official
 * policies, either expressed or implied, of the FreeBSD Project.
 */

#include "efx.h"
#include "efx_impl.h"
#if EFSYS_OPT_MON_MCDI
#include "mcdi_mon.h"
#endif

#if EFSYS_OPT_HUNTINGTON


        __checkReturn   efx_rc_t
hunt_board_cfg(
        __in            efx_nic_t *enp)
{
        efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
        efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
        uint8_t mac_addr[6] = { 0 };
        uint32_t board_type = 0;
        ef10_link_state_t els;
        efx_port_t *epp = &(enp->en_port);
        uint32_t port;
        uint32_t pf;
        uint32_t vf;
        uint32_t mask;
        uint32_t flags;
        uint32_t sysclk;
        uint32_t base, nvec;
        efx_rc_t rc;

        if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
                goto fail1;

        /*
         * NOTE: The MCDI protocol numbers ports from zero.
         * The common code MCDI interface numbers ports from one.
         */
        emip->emi_port = port + 1;

        if ((rc = ef10_external_port_mapping(enp, port,
                    &encp->enc_external_port)) != 0)
                goto fail2;

        /*
         * Get PCIe function number from firmware (used for
         * per-function privilege and dynamic config info).
         *  - PCIe PF: pf = PF number, vf = 0xffff.
         *  - PCIe VF: pf = parent PF, vf = VF number.
         */
        if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
                goto fail3;

        encp->enc_pf = pf;
        encp->enc_vf = vf;

        /* MAC address for this function */
        if (EFX_PCI_FUNCTION_IS_PF(encp)) {
                rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
                if ((rc == 0) && (mac_addr[0] & 0x02)) {
                        /*
                         * If the static config does not include a global MAC
                         * address pool then the board may return a locally
                         * administered MAC address (this should only happen on
                         * incorrectly programmed boards).
                         */
                        rc = EINVAL;
                }
        } else {
                rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
        }
        if (rc != 0)
                goto fail4;

        EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);

        /* Board configuration */
        rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
        if (rc != 0) {
                /* Unprivileged functions may not be able to read board cfg */
                if (rc == EACCES)
                        board_type = 0;
                else
                        goto fail5;
        }

        encp->enc_board_type = board_type;
        encp->enc_clk_mult = 1; /* not used for Huntington */

        /* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
        if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
                goto fail6;

        /* Obtain the default PHY advertised capabilities */
        if ((rc = ef10_phy_get_link(enp, &els)) != 0)
                goto fail7;
        epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
        epp->ep_adv_cap_mask = els.els_adv_cap_mask;

        /*
         * Enable firmware workarounds for hardware errata.
         * Expected responses are:
         *  - 0 (zero):
         *      Success: workaround enabled or disabled as requested.
         *  - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
         *      Firmware does not support the MC_CMD_WORKAROUND request.
         *      (assume that the workaround is not supported).
         *  - MC_CMD_ERR_ENOENT (reported as ENOENT):
         *      Firmware does not support the requested workaround.
         *  - MC_CMD_ERR_EPERM  (reported as EACCES):
         *      Unprivileged function cannot enable/disable workarounds.
         *
         * See efx_mcdi_request_errcode() for MCDI error translations.
         */

        /*
         * If the bug35388 workaround is enabled, then use an indirect access
         * method to avoid unsafe EVQ writes.
         */
        rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG35388, B_TRUE,
            NULL);
        if ((rc == 0) || (rc == EACCES))
                encp->enc_bug35388_workaround = B_TRUE;
        else if ((rc == ENOTSUP) || (rc == ENOENT))
                encp->enc_bug35388_workaround = B_FALSE;
        else
                goto fail8;

        /*
         * If the bug41750 workaround is enabled, then do not test interrupts,
         * as the test will fail (seen with Greenport controllers).
         */
        rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG41750, B_TRUE,
            NULL);
        if (rc == 0) {
                encp->enc_bug41750_workaround = B_TRUE;
        } else if (rc == EACCES) {
                /* Assume a controller with 40G ports needs the workaround. */
                if (epp->ep_default_adv_cap_mask & EFX_PHY_CAP_40000FDX)
                        encp->enc_bug41750_workaround = B_TRUE;
                else
                        encp->enc_bug41750_workaround = B_FALSE;
        } else if ((rc == ENOTSUP) || (rc == ENOENT)) {
                encp->enc_bug41750_workaround = B_FALSE;
        } else {
                goto fail9;
        }
        if (EFX_PCI_FUNCTION_IS_VF(encp)) {
                /* Interrupt testing does not work for VFs. See bug50084. */
                encp->enc_bug41750_workaround = B_TRUE;
        }

        /*
         * If the bug26807 workaround is enabled, then firmware has enabled
         * support for chained multicast filters. Firmware will reset (FLR)
         * functions which have filters in the hardware filter table when the
         * workaround is enabled/disabled.
         *
         * We must recheck if the workaround is enabled after inserting the
         * first hardware filter, in case it has been changed since this check.
         */
        rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG26807,
            B_TRUE, &flags);
        if (rc == 0) {
                encp->enc_bug26807_workaround = B_TRUE;
                if (flags & (1 << MC_CMD_WORKAROUND_EXT_OUT_FLR_DONE_LBN)) {
                        /*
                         * Other functions had installed filters before the
                         * workaround was enabled, and they have been reset
                         * by firmware.
                         */
                        EFSYS_PROBE(bug26807_workaround_flr_done);
                        /* FIXME: bump MC warm boot count ? */
                }
        } else if (rc == EACCES) {
                /*
                 * Unprivileged functions cannot enable the workaround in older
                 * firmware.
                 */
                encp->enc_bug26807_workaround = B_FALSE;
        } else if ((rc == ENOTSUP) || (rc == ENOENT)) {
                encp->enc_bug26807_workaround = B_FALSE;
        } else {
                goto fail10;
        }

        /* Get sysclk frequency (in MHz). */
        if ((rc = efx_mcdi_get_clock(enp, &sysclk)) != 0)
                goto fail11;

        /*
         * The timer quantum is 1536 sysclk cycles, documented for the
         * EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
         */
        encp->enc_evq_timer_quantum_ns = 1536000UL / sysclk; /* 1536 cycles */
        if (encp->enc_bug35388_workaround) {
                encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
                ERF_DD_EVQ_IND_TIMER_VAL_WIDTH) / 1000;
        } else {
                encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
                FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
        }

        /* Check capabilities of running datapath firmware */
        if ((rc = ef10_get_datapath_caps(enp)) != 0)
            goto fail12;

        /* Alignment for receive packet DMA buffers */
        encp->enc_rx_buf_align_start = 1;
        encp->enc_rx_buf_align_end = 64; /* RX DMA end padding */

        /* Alignment for WPTR updates */
        encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;

        /*
         * Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
         * MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
         * resources (allocated to this PCIe function), which is zero until
         * after we have allocated VIs.
         */
        encp->enc_evq_limit = 1024;
        encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
        encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;

        encp->enc_buftbl_limit = 0xFFFFFFFF;

        encp->enc_piobuf_limit = HUNT_PIOBUF_NBUFS;
        encp->enc_piobuf_size = HUNT_PIOBUF_SIZE;
        encp->enc_piobuf_min_alloc_size = HUNT_MIN_PIO_ALLOC_SIZE;

        /*
         * Get the current privilege mask. Note that this may be modified
         * dynamically, so this value is informational only. DO NOT use
         * the privilege mask to check for sufficient privileges, as that
         * can result in time-of-check/time-of-use bugs.
         */
        if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
                goto fail13;
        encp->enc_privilege_mask = mask;

        /* Get interrupt vector limits */
        if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
                if (EFX_PCI_FUNCTION_IS_PF(encp))
                        goto fail14;

                /* Ignore error (cannot query vector limits from a VF). */
                base = 0;
                nvec = 1024;
        }
        encp->enc_intr_vec_base = base;
        encp->enc_intr_limit = nvec;

        /*
         * Maximum number of bytes into the frame the TCP header can start for
         * firmware assisted TSO to work.
         */
        encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;

        return (0);

fail14:
        EFSYS_PROBE(fail14);
fail13:
        EFSYS_PROBE(fail13);
fail12:
        EFSYS_PROBE(fail12);
fail11:
        EFSYS_PROBE(fail11);
fail10:
        EFSYS_PROBE(fail10);
fail9:
        EFSYS_PROBE(fail9);
fail8:
        EFSYS_PROBE(fail8);
fail7:
        EFSYS_PROBE(fail7);
fail6:
        EFSYS_PROBE(fail6);
fail5:
        EFSYS_PROBE(fail5);
fail4:
        EFSYS_PROBE(fail4);
fail3:
        EFSYS_PROBE(fail3);
fail2:
        EFSYS_PROBE(fail2);
fail1:
        EFSYS_PROBE1(fail1, efx_rc_t, rc);

        return (rc);
}


#endif  /* EFSYS_OPT_HUNTINGTON */