/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */




/*
 * I18N message number ranges
 *  This file: 10000 - 10499
 *  Shared common messages: 1 - 1999
 */

/* #define      _POSIX_SOURCE 1 */


/*      Includes        */
#include        <stdlib.h>
#include        <stdio.h>
#include        <fcntl.h>
#include        <nl_types.h>
#include        <sys/scsi/scsi.h>
#include        <string.h>
#include        <errno.h>
#include        "common.h"
#include        "errorcodes.h"



/*      Defines         */
#define MAXLEN  1000

/*
 * Allocate space for and return a pointer to a string
 * on the stack.  If the string is null, create
 * an empty string.
 */
char *
alloc_string(char *s)
{
        char    *ns;

        if (s == (char *)NULL) {
                ns = (char *)calloc(1, 1);
        } else {
                ns = (char *)calloc(1, strlen(s) + 1);
                if (ns != NULL) {
                        (void) strncpy(ns, s, (strlen(s) + 1));
                }
        }
        return (ns);
}


/*
 * Decodes the SCSI sense byte to a string.
 *
 * RETURNS:
 *      character string
 */
static char *
decode_sense_byte(uchar_t status)
{
        switch (status & STATUS_MASK) {
                case STATUS_GOOD:
                        return (MSGSTR(10000, "Good status"));

                case STATUS_CHECK:
                        return (MSGSTR(128, "Check condition"));

                case STATUS_MET:
                        return (MSGSTR(124, "Condition met"));

                case STATUS_BUSY:
                        return (MSGSTR(37, "Busy"));

                case STATUS_INTERMEDIATE:
                        return (MSGSTR(10001, "Intermediate"));

                case STATUS_INTERMEDIATE_MET:
                        return (MSGSTR(10002, "Intermediate - condition met"));

                case STATUS_RESERVATION_CONFLICT:
                        return (MSGSTR(10003, "Reservation_conflict"));

                case STATUS_TERMINATED:
                        return (MSGSTR(126, "Command terminated"));

                case STATUS_QFULL:
                        return (MSGSTR(83, "Queue full"));

                default:
                        return (MSGSTR(4, "Unknown status"));
        }
}


/*
 * This function finds a predefined error string to a given
 * error number (errornum), allocates memory for the string
 * and returns the corresponding error message to the caller.
 *
 * RETURNS
 *      error string    if O.K.
 *      NULL            otherwise
 */
char
*get_errString(int errornum)
{
char    err_msg[MAXLEN], *errStrg;

        err_msg[0] = '\0'; /* Just in case */
        if (errornum < L_BASE) {
                        /* Some sort of random system error most likely */
                        errStrg = strerror(errno);
                        if (errStrg != NULL) {
                                (void) strcpy(err_msg, errStrg);
                        } else { /* Something's _really_ messed up */
                                (void) sprintf(err_msg,
                                        MSGSTR(10081,
                                        " Error: could not decode the"
                                        " error message.\n"
                                        " The given error message is not"
                                        " defined in the library.\n"
                                        " Message number: %d.\n"), errornum);
                        }

        /* Make sure ALL CASES set err_msg to something */
        } else switch (errornum) {
                case L_SCSI_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10096,
                                " Error: SCSI failure."));
                        break;

                case L_PR_INVLD_TRNSFR_LEN:
                        (void) sprintf(err_msg,
                                MSGSTR(10005,
                                " Error: Persistant Reserve command"
                                " transfer length not word aligned."));
                        break;

                case L_RD_NO_DISK_ELEM:
                        (void) sprintf(err_msg,
                                MSGSTR(10006,
                                " Error: Could not find the disk elements"
                                " in the Receive Diagnostic pages."));
                        break;

                case L_RD_INVLD_TRNSFR_LEN:
                        (void) sprintf(err_msg,
                                MSGSTR(10007,
                                " Error: Receive Diagnostic command"
                                " transfer length not word aligned."));
                        break;

                case L_ILLEGAL_MODE_SENSE_PAGE:
                        (void) sprintf(err_msg,
                                MSGSTR(10008,
                                " Error: Programming error - "
                                "illegal Mode Sense parameter."));
                        break;

                case L_INVALID_NO_OF_ENVSEN_PAGES:
                        (void) sprintf(err_msg,
                                MSGSTR(10009,
                                " Error: Invalid no. of sense pages.\n"
                                " Could not get valid sense page"
                                " information from the device."));
                        break;

                case L_INVALID_BUF_LEN:
                        (void) sprintf(err_msg,
                                MSGSTR(10010,
                                " Error: Invalid buffer length.\n"
                                " Could not get diagnostic "
                                " information from the device."));
                        break;

                case L_INVALID_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(113,
                                " Error: Invalid pathname"));
                        break;

                case L_NO_PHYS_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(10011,
                                " Error: Could not get"
                                " physical path to the device."));
                        break;

                case L_NO_SES_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(10098,
                                " Error: No SES found"
                                " for the device path."));
                        break;

                case L_INVLD_PATH_NO_SLASH_FND:
                        (void) sprintf(err_msg,
                                MSGSTR(10012,
                                "Error in the device physical path."));
                        break;

                case L_INVLD_PATH_NO_ATSIGN_FND:
                        (void) sprintf(err_msg,
                                MSGSTR(10013,
                                " Error in the device physical path:"
                                " no @ found."));
                        break;

                case L_INVALID_SLOT:
                        (void) sprintf(err_msg,
                                MSGSTR(10014,
                                " Error: Invalid path format."
                                " Invalid slot."));
                        break;

                case L_INVALID_LED_RQST:
                        (void) sprintf(err_msg,
                                MSGSTR(10015,
                                " Error: Invalid LED request."));
                        break;

                case L_INVALID_PATH_FORMAT:
                        (void) sprintf(err_msg,
                                MSGSTR(10016,
                                " Error: Invalid path format."));
                        break;

                case L_OPEN_PATH_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10017,
                                " Error opening the path."));
                        break;

                case L_INVALID_PASSWORD_LEN:
                        (void) sprintf(err_msg,
                                MSGSTR(10018,
                                "Error: Invalid password length."));
                        break;

                case L_INVLD_PHYS_PATH_TO_DISK:
                        (void) sprintf(err_msg,
                                MSGSTR(10019,
                                " Error: Physical path not of a disk."));
                        break;

                case L_INVLD_ID_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10020,
                                " Error in the device physical path:"
                                " Invalid ID found in the path."));
                        break;

                case L_INVLD_WWN_FORMAT:
                        (void) sprintf(err_msg,
                                MSGSTR(10021,
                                " Error in the device physical path:"
                                " Invalid wwn format."));

                        break;

                case L_NO_VALID_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(10022,
                                " Error: Could not find valid path to"
                                " the device."));
                        break;

                case L_NO_WWN_FOUND_IN_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(10023,
                                " Error in the device physical path:"
                                " No WWN found."));

                        break;

                case L_NO_NODE_WWN_IN_WWNLIST:
                        (void) sprintf(err_msg,
                                MSGSTR(10024,
                                " Error: Device's Node WWN is not"
                                " found in the WWN list.\n"));
                        break;

                case L_NO_NODE_WWN_IN_BOXLIST:
                        (void) sprintf(err_msg,
                                MSGSTR(10025,
                                " Error: Device's Node WWN is not"
                                " found in the Box list.\n"));
                        break;

                case L_NULL_WWN_LIST:
                        (void) sprintf(err_msg,
                                MSGSTR(10026,
                                " Error: Null WWN list found."));
                        break;

                case L_NO_LOOP_ADDRS_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10027,
                                " Error: Could not find the loop address for "
                                " the device at physical path."));

                        break;

                case L_INVLD_PORT_IN_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(10028,
                                "Error in the device physical path:"
                                " Invalid port number found."
                                " (Should be 0 or 1)."));

                        break;

                case L_INVALID_LOOP_MAP:
                        (void) sprintf(err_msg,
                                MSGSTR(10029,
                                "Error: Invalid loop map found."));
                        break;

                case L_SFIOCGMAP_IOCTL_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10030,
                                " Error: SFIOCGMAP ioctl failed."
                                " Cannot read loop map."));
                        break;

                case L_FCIO_GETMAP_IOCTL_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10031,
                                " Error: FCIO_GETMAP ioctl failed."
                                " Cannot read loop map."));
                        break;

                case L_FCIO_LINKSTATUS_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10032,
                                " Error: FCIO_LINKSTATUS ioctl failed."
                                " Cannot read loop map."));
                        break;

                case L_FCIOGETMAP_INVLD_LEN:
                        (void) sprintf(err_msg,
                                MSGSTR(10033,
                                " Error: FCIO_GETMAP ioctl returned"
                                " an invalid parameter:"
                                " # entries to large."));
                        break;

                case L_FCIO_FORCE_LIP_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10034,
                                " Error: FCIO_FORCE_LIP ioctl failed."));
                        break;

                case L_FCIO_FORCE_LIP_PARTIAL_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10115,
                                " Error: FCIO_FORCE_LIP ioctl failed on one"
                                " or more (but not all) of the paths."));
                        break;

                case L_DWNLD_CHKSUM_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10035,
                                "Error: Download file checksum failed."));

                        break;

                case L_DWNLD_READ_HEADER_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10036,
                                " Error: Reading download file exec"
                                " header failed."));
                        break;

                case L_DWNLD_READ_INCORRECT_BYTES:
                        (void) sprintf(err_msg,
                                MSGSTR(10037,
                                " Error: Incorrect number of bytes read."));
                        break;

                case L_DWNLD_INVALID_TEXT_SIZE:
                        (void) sprintf(err_msg,
                                MSGSTR(10038,
                                " Error: Reading text segment: "
                                " Found wrong size."));
                        break;

                case L_DWNLD_READ_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10039,
                                " Error: Failed to read download file."));
                        break;

                case L_DWNLD_BAD_FRMWARE:
                        (void) sprintf(err_msg,
                                MSGSTR(10040,
                                " Error: Bad Firmware MAGIC."));
                        break;

                case L_DWNLD_TIMED_OUT:
                        (void) sprintf(err_msg,
                                MSGSTR(10041,
                                " Error: Timed out in 5 minutes"
                                " waiting for the"
                                " IB to become available."));
                        break;

                case L_REC_DIAG_PG1:
                        (void) sprintf(err_msg,
                                MSGSTR(10042,
                                " Error parsing the Receive"
                                " diagnostic page."));
                        break;

                case L_TRANSFER_LEN:
                        (void) sprintf(err_msg,
                                MSGSTR(10043, "  "));
                        break;

                case L_REQUIRE_FILE:
                        (void) sprintf(err_msg,
                                MSGSTR(10109,
                                " Error: No default file.  You must specify"
                                " the filename path."));
                        break;

                case L_MALLOC_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10,
                                " Error: Unable to allocate memory."));
                        break;

                case L_LOCALTIME_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10044,
                                " Error: Could not convert time"
                                " to broken-down time: Hrs/Mins/Secs."));
                        break;

                case L_SELECT_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10045,
                                " select() error during retry:"
                                " Could not wait for"
                                " specified time."));
                        break;

                case L_NO_DISK_DEV_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10046,
                                " Error: No disk devices found"
                                " in the /dev/rdsk"
                                " directory."));
                        break;

                case L_NO_TAPE_DEV_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10047,
                                " Error: No tape devices found"
                                " in the /dev/rmt"
                                " directory."));
                        break;

                case L_LSTAT_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10048,
                                " lstat() error: Cannot obtain status"
                                " for the device."));
                        break;

                case L_SYMLINK_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10049,
                                " Error: Could not read the symbolic link."));
                        break;

                case L_UNAME_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10050,
                                " uname() error: Could not obtain the"
                                " architeture of the host machine."));
                        break;

                case L_DRVCONFIG_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10051,
                                " Error: Could not run drvconfig."));
                        break;

                case L_DISKS_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10052,
                                " Error: Could not run disks."));
                        break;

                case L_DEVLINKS_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10053,
                                " Error: Could not run devlinks."));
                        break;

                case L_READ_DEV_DIR_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10054,
                                " Error: Could not read /dev/rdsk"
                                " directory."));
                        break;

                case L_OPEN_ES_DIR_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10055,
                                " Error: Could not open /dev/es"
                                " directory."));
                        break;

                case L_LSTAT_ES_DIR_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10056,
                                " lstat() error: Could not get status"
                                " for /dev/es directory."));
                        break;

                case L_DEV_BUSY:
                        (void) sprintf(err_msg,
                                MSGSTR(10057,
                                " Error: Could not offline the device\n"
                                " May be Busy."));
                        break;

                case L_EXCL_OPEN_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10058,
                                " Error: Could not open device in"
                                " exclusive mode."
                                "  May already be open."));
                        break;

                case L_DEVICE_RESERVED:
                        (void) sprintf(err_msg,
                                MSGSTR(10059,
                                " Error: Disk is reserved."));
                        break;

                case L_DISKS_RESERVED:
                        (void) sprintf(err_msg,
                                MSGSTR(10060,
                                " Error: One or more disks in"
                                " SENA are reserved."));
                        break;

                case L_SLOT_EMPTY:
                        (void) sprintf(err_msg,
                                MSGSTR(10061,
                                " Error: Slot is empty."));
                        break;

                case L_ACQUIRE_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10062,
                                " Error: Could not acquire"
                                " the device."));
                        break;

                case L_POWER_OFF_FAIL_BUSY:
                        (void) sprintf(err_msg,
                                MSGSTR(10063,
                                " Error: Could not power off the device.\n"
                                " May be Busy."));
                        break;

                case L_ENCL_NAME_CHANGE_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10064,
                                " Error: The Enclosure name change failed."));
                        break;

                case L_DUPLICATE_ENCLOSURES:
                        (void) sprintf(err_msg,
                                MSGSTR(10065,
                                " Error: There are two or more enclosures"
                                " with the same name."
                                " Please use a logical or physical"
                                " pathname."));
                        break;

                case L_INVALID_NUM_DISKS_ENCL:
                        (void) sprintf(err_msg,
                                MSGSTR(10066,
                                " Error: The number of disks in the"
                                " front & rear of the enclosure are"
                                " different."
                                " This is not a supported configuration."));
                        break;

                case L_ENCL_INVALID_PATH:
                        (void) sprintf(err_msg,
                                MSGSTR(10067,
                                " Error: Invalid path."
                                " Device is not a SENA subsystem."));
                        break;

                case L_NO_ENCL_LIST_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10068,
                                " Error: Cannot get the Box list."));
                        break;

                case L_IB_NO_ELEM_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10069,
                                " Error: No elements returned from"
                                " enclosure (IB)."));
                        break;

                case L_GET_STATUS_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10070,
                                " Error: Get status failed."));
                        break;

                case L_RD_PG_MIN_BUFF:
                        (void) sprintf(err_msg,
                                MSGSTR(10071,
                                " Error: Reading page from IB.\n"
                                " Buffer size too small."));
                        break;

                case L_RD_PG_INVLD_CODE:
                        (void) sprintf(err_msg,
                                MSGSTR(10072,
                                " Error: Reading page from IB\n"
                                " Invalid page code or page len found."));
                        break;

                case L_BP_BUSY_RESERVED:
                        (void) sprintf(err_msg,
                                MSGSTR(10073,
                                " Error: There is a busy or reserved disk"
                                " attached to this backplane.\n"
                                " You must close the disk,\n"
                                " or release the disk,\n"
                                " or resubmit the command using"
                                " the Force option."));
                        break;

                case L_BP_BUSY:
                        (void) sprintf(err_msg,
                                MSGSTR(10074,
                                " Error: There is a busy disk"
                                " attached to this backplane.\n"
                                " You must close the disk,\n"
                                " or resubmit the command using"
                                " the Force option."));
                        break;

                case L_BP_RESERVED:
                        (void) sprintf(err_msg,
                                MSGSTR(10075,
                                " Error: There is a reserved disk"
                                " attached to this backplane.\n"
                                " You must release the disk,\n"
                                " or resubmit the subcommand using"
                                " the Force option."));
                        break;

                case L_NO_BP_ELEM_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10076,
                                " Error: No Back plane elements found"
                                " in the enclosure."));
                        break;

                case L_SSA_CONFLICT:
                        (void) sprintf(err_msg,
                                MSGSTR(10077,
                                " There is a conflict between the "
                                "enclosure name and an SSA name of "
                                "same form, cN.\n"
                                " Please use a logical or physical "
                                "pathname."));
                        break;

                case L_WARNING:
                        (void) sprintf(err_msg,
                                MSGSTR(10078, " Warning:"));

                        break;

                case L_TH_JOIN:
                        (void) sprintf(err_msg,
                                MSGSTR(10079,
                                " Error: Thread join failed."));
                        break;

                case L_FCIO_RESET_LINK_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10082,
                                " Error: FCIO_RESET_LINK ioctl failed.\n"
                                " Could not reset the loop."));
                        break;

                case L_FCIO_GET_FCODE_REV_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10083,
                                " Error: FCIO_GET_FCODE_REV ioctl failed.\n"
                                " Could not get the fcode version."));
                        break;

                case L_FCIO_GET_FW_REV_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10084,
                                " Error: FCIO_GET_FW_REV ioctl failed.\n"
                                " Could not get the firmware revision."));
                        break;

                case L_NO_DEVICES_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10085,
                                " No FC devices found."));
                        break;

                case L_INVALID_DEVICE_COUNT:
                        (void) sprintf(err_msg,
                                MSGSTR(10086,
                                " Error: FCIO_GET_DEV_LIST ioctl returned"
                                " an invalid device count."));
                        break;

                case L_FCIO_GET_NUM_DEVS_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10087,
                                " Error: FCIO_GET_NUM_DEVS ioctl failed.\n"
                                " Could not get the number of devices."));
                        break;

                case L_FCIO_GET_DEV_LIST_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10088,
                                " Error: FCIO_GET_DEV_LIST ioctl failed.\n"
                                " Could not get the device list."));
                        break;

                case L_FCIO_GET_LINK_STATUS_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10089,
                                " Error: FCIO_GET_LINK_STATUS ioctl failed.\n"
                                " Could not get the link status."));
                        break;

                case L_PORT_OFFLINE_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10090,
                                " Error: ioctl to offline the port failed."));
                        break;

                case L_PORT_OFFLINE_UNSUPPORTED:
                        (void) sprintf(err_msg,
                                MSGSTR(10091,
                                " Error: The driver does not support ioctl to"
                                " disable the FCA port."));
                        break;

                case L_PORT_ONLINE_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10092,
                                " Error: ioctl to online the port failed."));
                        break;

                case L_PORT_ONLINE_UNSUPPORTED:
                        (void) sprintf(err_msg,
                                MSGSTR(10093,
                                " Error: The driver does not support ioctl to"
                                " enable the FCA port."));
                        break;

                case L_FCP_TGT_INQUIRY_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10094,
                                " Error: FCP_TGT_INQUIRY ioctl failed.\n"
                                " Could not get the target inquiry data"
                                " from FCP."));
                        break;

                case L_FSTAT_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10095,
                                " fstat() error: Cannot obtain status"
                                " for the device."));
                        break;

                case L_FCIO_GET_HOST_PARAMS_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10097,
                                " Error: FCIO_GET_HOST_PARAMS ioctl failed.\n"
                                " Could not get the host parameters."));
                        break;

                case L_STAT_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10099,
                                " stat() error: Cannot obtain status"
                                " for the device."));
                        break;

                case L_DEV_SNAPSHOT_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10100,
                                " Error: Could not retrieve device tree"
                                " snapshot."));
                        break;

                case L_LOOPBACK_UNSUPPORTED:
                        (void) sprintf(err_msg,
                                MSGSTR(10101,
                                " Error: Loopback mode is unsupported for this"
                                " device."));
                        break;

                case L_LOOPBACK_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10102,
                                " Error: Error occurred during loopback mode"
                                " set."));
                        break;

                case L_FCIO_GET_TOPOLOGY_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10103,
                                " Error: FCIO_GET_TOPOLOGY ioctl failed.\n"
                                " Could not get the fca port topology."));
                        break;

                case L_UNEXPECTED_FC_TOPOLOGY:
                        (void) sprintf(err_msg,
                                MSGSTR(10104,
                                " Error: Unexpected Fibre Channel topology"
                                " found."));
                        break;

                case L_INVALID_PRIVATE_LOOP_ADDRESS:
                        (void) sprintf(err_msg,
                                MSGSTR(10105,
                                " Error: AL_PA is not a valid private loop"
                                " address."));
                        break;

                case L_NO_FABRIC_ADDR_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10106,
                                " Error: Could not find the fabric address"
                                " for the device at physical path."));
                        break;

                case L_INVALID_FABRIC_ADDRESS:
                        (void) sprintf(err_msg,
                                MSGSTR(10107,
                                " Error: Device port address on the Fabric"
                                " topology is not valid."));
                        break;

                case L_PT_PT_FC_TOP_NOT_SUPPORTED:
                        (void) sprintf(err_msg,
                                MSGSTR(10108,
                                " Error: Point to Point Fibre Channel "
                                "topology is currently not supported."));
                        break;

                case L_FCIO_DEV_LOGIN_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10310,
                                " Error: FCIO_DEV_LOGIN ioctl failed."));
                        break;

                case L_FCIO_DEV_LOGOUT_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10311,
                                " Error: FCIO_DEV_LOGOUT ioctl failed."));
                        break;

                case L_OPNOSUPP_ON_TOPOLOGY:
                        (void) sprintf(err_msg,
                                MSGSTR(10312,
                                " Error: operation not supported "
                                "on connected topology."));
                        break;

                case L_INVALID_PATH_TYPE:
                        (void) sprintf(err_msg,
                                MSGSTR(10313,
                                " Error: operation not supported "
                                "on the path."));
                        break;

                case L_FCIO_GET_STATE_FAIL:
                        (void) sprintf(err_msg,
                                MSGSTR(10314,
                                " Error: FCIO_GET_STATE ioctl failed."));
                        break;

                case L_WWN_NOT_FOUND_IN_DEV_LIST:
                        (void) sprintf(err_msg,
                                MSGSTR(10315,
                                " Error: device WWN not found in "
                                "device list."));
                        break;

                case L_STAT_RMT_DIR_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10110,
                                " stat() error: Could not get status"
                                " for /dev/rmt directory."));
                        break;

                case L_STAT_DEV_DIR_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10111,
                                " stat() error: Could not get status"
                                " for /dev/dsk directory."));
                        break;

                case L_PROM_INIT_FAILED:
                        (void) sprintf(err_msg,
                                MSGSTR(10234,
                                " Error: di_prom_init failure"));
                        break;

                case L_PORT_DRIVER_NOT_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10113,
                                " Error: requested port driver"
                                " does not exist"));
                        break;

                case L_PHYS_PATH_NOT_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10114,
                                " Error: requested phys path does not exist"));
                        break;

                case L_GET_DEV_LIST_ULP_FAILURE:
                        (void) sprintf(err_msg,
                                MSGSTR(10150,
                                " Error: g_get_dev_list failed on ULP "
                                "processing of target device(s)"));
                        break;

                case L_SCSI_VHCI_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10230,
                                " Error: Unable to perform failover"));
                        break;

                case L_SCSI_VHCI_ALREADY_ACTIVE:
                        (void) sprintf(err_msg,
                                MSGSTR(10231,
                                " Error: Pathclass already active"));
                        break;

                case L_NO_DEVID:
                        (void) sprintf(err_msg,
                                MSGSTR(10232,
                                " Error: No device identifier found"));
                        break;

                case L_DRIVER_NOTSUPP:
                        (void) sprintf(err_msg,
                                MSGSTR(10233,
                                " Error: Driver not supported"));
                        break;

                case L_PROC_WWN_ARG_ERROR:
                        (void) sprintf(err_msg,
                                MSGSTR(10235,
                                " Error: process WWN argument"));
                        break;

                case L_NO_WWN_PROP_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10236,
                                " Error: WWN prop not found"));
                        break;

                case L_NO_DRIVER_NODES_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10237,
                                " Error: Requested driver nodes not found"));
                        break;

                case L_INVALID_MAP_DEV_ADDR:
                        (void) sprintf(err_msg,
                                MSGSTR(10330,
                                " Error: Invalid map device handle found"));
                        break;

                case L_INVALID_MAP_DEV_PROP_TYPE:
                        (void) sprintf(err_msg,
                                MSGSTR(10331,
                                " Error: Invalid device property type found"));
                        break;

                case L_INVALID_MAP_DEV_PROP_NAME:
                        (void) sprintf(err_msg,
                                MSGSTR(10332,
                                " Error: Invalid device property name found"));
                        break;

                case L_INVALID_MAP_DEV_PROP:
                        (void) sprintf(err_msg,
                                MSGSTR(10333,
                                " Error: Invalid device property handle "
                                "found"));
                        break;

                case L_SCSI_VHCI_NO_STANDBY:
                        (void) sprintf(err_msg,
                                MSGSTR(10334,
                                " Error: Unable to perform failover, "
                                "standby path unavailable"));
                        break;

                case L_SCSI_VHCI_FAILOVER_NOTSUP:
                        (void) sprintf(err_msg,
                                MSGSTR(10335,
                                " Error: Device does not support failover"));
                        break;

                case L_SCSI_VHCI_FAILOVER_BUSY:
                        (void) sprintf(err_msg,
                                MSGSTR(10336,
                                " Error: Failover currently in progress"));
                        break;

                case L_NO_SUCH_DEV_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10337,
                                " Error: No such device found"));
                        break;

                case L_NO_SUCH_PROP_FOUND:
                        (void) sprintf(err_msg,
                                MSGSTR(10338,
                                " Error: No such property found"));
                        break;

                case L_INVALID_ARG:
                        (void) sprintf(err_msg,
                                MSGSTR(10339,
                                " Error: Invalid argument found"));
                        break;

                default:

                        if (((L_SCSI_ERROR ^ errornum) == STATUS_GOOD) ||
                        ((L_SCSI_ERROR ^ errornum) == STATUS_BUSY) ||
                        ((L_SCSI_ERROR ^ errornum) == STATUS_CHECK) ||
                        ((L_SCSI_ERROR ^ errornum) == STATUS_MET) ||
                        ((L_SCSI_ERROR ^ errornum) == STATUS_INTERMEDIATE) ||
                ((L_SCSI_ERROR ^ errornum) == STATUS_INTERMEDIATE_MET) ||
                ((L_SCSI_ERROR ^ errornum) == STATUS_RESERVATION_CONFLICT) ||
                        ((L_SCSI_ERROR ^ errornum) == STATUS_TERMINATED) ||
                        ((L_SCSI_ERROR ^ errornum) == STATUS_QFULL)) {
                                (void) sprintf(err_msg,
                                        MSGSTR(10080,
                                        " SCSI Error - Sense Byte:(0x%x) %s \n"
                                        " Error: Retry failed."),
                                (L_SCSI_ERROR ^ errornum) & STATUS_MASK,
                        decode_sense_byte((uchar_t)L_SCSI_ERROR ^ errornum));
                        } else {
                                (void) sprintf(err_msg,
                                        MSGSTR(10081,
                                        " Error: could not decode the"
                                        " error message.\n"
                                        " The given error message is not"
                                        " defined in the library.\n"
                                        " Message number: %d.\n"), errornum);
                        }

        } /* end of switch */

        errStrg = alloc_string(err_msg);

        return (errStrg);
}