CH_ERR
void CH_ERR(const char *fmt, ...);
CH_ERR("%s: MAC %d reset timed out\n",
CH_ERR("%s: SGE initialization failed\n",
CH_ERR("%s: MC3 initialization failed\n",
CH_ERR("%s: MC4 initialization failed\n",
CH_ERR("%s: MC5 initialization failed\n",
CH_ERR("%s: ULP initialization failed\n",
CH_ERR("%s: CSPI initialization failed\n",
CH_ERR("%s: ESPI initialization failed\n",
CH_ERR("%s: TP initialization failed\n",
CH_ERR("%s: PHY %d initialization failed\n",
CH_ERR("%s: MAC %d initialization failed\n",
CH_ERR("%s: could not read MAC address from VPD ROM\n",
CH_ERR("%s: reading EEPROM address 0x%x failed\n",
CH_ERR("%s: ESPI clock not ready\n", adapter_name(adapter));
CH_ERR("%s: TRICN write timed out\n", adapter_name(adapter));
CH_ERR("%s: TRICN read timed out\n", adapter_name(adapter));
CH_ERR("%s: write to MC3 register 0x%x timed out\n",
CH_ERR("%s: MC3 DLL lock failed\n",
CH_ERR("%s: MC3 BIST timed out\n", adapter_name(adapter));
CH_ERR("%s: MC4 DLL lock failed\n",
CH_ERR("%s: MC4 BIST timed out\n", adapter_name(adapter));
CH_ERR("%s: write to MC4 register 0x%x timed out\n",
CH_ERR("%s: MC5 timeout writing to TCAM address 0x%x\n",
CH_ERR("%s: TCAM reset timed out\n", adapter_name(adap));
CH_ERR("%s: unsupported TCAM type\n", adapter_name(adap));
CH_ERR("%s: TP initialization timed out\n",
CH_ERR("%s: Didn't find a VSC 7321.\n", adapter_name(adapter));
CH_ERR("sleep %d us\n",ib[i].data);
CH_ERR("No bist address: 0x%x\n", address);
CH_ERR("Still in bist read: 0x%x\n", result);
CH_ERR("bist read error: 0x%x\n", result);
CH_ERR("No bist address: 0x%x\n", address);
CH_ERR("Suspicious write out of range value: 0x%x\n", value);
CH_ERR("Still in bist write: 0x%x\n", result);
CH_ERR("bist write error: 0x%x\n", result);
CH_ERR("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",
CH_ERR("Invalid tpi read from MAC, breaking loop.\n");
CH_ERR(adap, "Device %d is not supported\n",
CH_ERR(adapter, "Device %d is not supported\n",
CH_ERR(adapter,
CH_ERR(adap, "cfg file too large, max is %u bytes\n",
CH_ERR(adap, "config file %s failed %d\n",
CH_ERR(adap, "Erasing serial flash failed, error %d\n", ret);
CH_ERR(adap, "boot image encroaching on firmware region\n");
CH_ERR(adapter,
CH_ERR(adap, "boot image too small/large\n");
CH_ERR(adap, "Boot image missing signature\n");
CH_ERR(adap, "PCI header missing signature\n");
CH_ERR(adap, "Vendor ID missing signature\n");
CH_ERR(adap, "boot image download failed, error %d\n", ret);
CH_ERR(adap, "bootcfg file too large, max is %u bytes\n",
CH_ERR(adap, "boot config data %s failed %d\n",
CH_ERR(adap, "bootcfg file too big, max is %u bytes\n",
CH_ERR(adap, "Querying FW using Ring backbone params command failed, err=%d\n",
CH_ERR(adap, "FW doesnot support ringbackbone features\n");
CH_ERR(adap, "Could not set Ringbackbone, err= %d\n",
CH_ERR(adap, "Firmware reports adapter error: %s\n",
CH_ERR(adap,
CH_ERR(adapter, "VPD still busy from previous operation\n");
CH_ERR(adapter, "VPD read of address %#x failed\n", addr);
CH_ERR(adapter, "VPD still busy from previous operation\n");
CH_ERR(adapter, "VPD write of address %#x failed\n", addr);
CH_ERR(adapter, "missing VPD keyword " name "\n"); \
CH_ERR(adapter,
CH_ERR(adapter,
CH_ERR(adap, "Unsupported chip type, %x\n",
CH_ERR(adap, "Card has firmware version %u.%u.%u, minimum "
CH_ERR(adap, "firmware on card (%u.%u.%u.%u) is %s, "
CH_ERR(adap, "firmware on card (%u.%u.%u.%u) is %s, "
CH_ERR(adap,
CH_ERR(adap,
CH_ERR(adap, "Cannot find a usable firmware: "
CH_ERR(adapter,
CH_ERR(adap,
CH_ERR(adap, "FW image has no data\n");
CH_ERR(adap,
CH_ERR(adap,
CH_ERR(adap, "FW image too large, max is %u bytes\n",
CH_ERR(adap,
CH_ERR(adap, "firmware download failed, error %d\n",
CH_ERR(adapter, "SGE error for queue %u\n", G_ERROR_QID(err));
CH_ERR(adapter, "SGE UNCAPTURED_ERROR set (clearing)\n");
CH_ERR(adap, "found VALID command in mbox %u: "
CH_ERR(adap, "command 0x%x in mailbox %d timed out\n",
CH_ERR(adapter, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
CH_ERR(adapter, "Need TP Channel Map for Chip %0x, Nports %d\n",
CH_ERR(adap, "found VALID command in mbox %u: "
CH_ERR(adapter, "Unsupported chip version %d\n", chip_version);
CH_ERR(adap, "command %#x in mailbox %d timed out\n",
CH_ERR(pi->adapter,
CH_ERR(pi->adapter,
CH_ERR(adapter,
CH_ERR(adapter, "Handle Port Information: Bad Command/Action %#x\n",
CH_ERR(adapter, "Device didn't become ready for access, "