WPRINTF
WPRINTF("final descriptor too short (%d) -- dropped",
WPRINTF("tx too many descriptors (%d > %d) -- dropped",
WPRINTF("TSO hdrlen too large: %d", hdrlen);
WPRINTF("TSO hdrlen too small for vlan insertion "
WPRINTF("TSO hdrlen too small for IP fields (%d) "
WPRINTF("TSO hdrlen too small for TCP fields "
WPRINTF("TSO hdrlen too small for UDP fields "
WPRINTF("TSO hdrlen too small for TCP/UDP fields "
WPRINTF("TSO hdrlen too small for TCP/UDP fields "
WPRINTF("packet too small for writable header");
WPRINTF("ignoring write to TDH while transmit enabled");
WPRINTF("ignoring non-zero value written to TDH");
#define DPRINTF(msg,params...) if (e82545_debug) WPRINTF(msg, params)
WPRINTF("%s NOT PERMITTED queue id %u / num_squeues %u",
WPRINTF("%s queue index %u > num_squeues %u",
WPRINTF("%s unsupported non-contig (list-based) "
WPRINTF("%s queue index %u / num_cqueues %u",
WPRINTF("%s unsupported non-contig (list-based) "
WPRINTF("%s queue index %u > num_cqueues %u",
WPRINTF("%s: Number of Queues already set", __func__);
WPRINTF("%s: Illegal NSQR value %#x", __func__, nqr);
WPRINTF("%s: Illegal NCQR value %#x", __func__, nqr);
WPRINTF("%s: unable to allocate IO req", __func__);
WPRINTF("%s command would exceed MDTS", __func__);
WPRINTF("%s command would exceed LBA range(slba=%#lx nblocks=%#lx)",
WPRINTF("%s: unable to allocate IO req", __func__);
WPRINTF("%s unhandled io command 0x%x",
WPRINTF("%s queue index %lu overflow from "
WPRINTF("%s write to SQ %lu before created", __func__,
WPRINTF("%s queue index %lu overflow from "
WPRINTF("%s write to CQ %lu before created", __func__,
WPRINTF("doorbell write prior to RDY (offset=%#lx)\n",
WPRINTF("guest attempted an overflow write offset "
WPRINTF("guest wrote invalid size %d (offset 0x%lx, "
WPRINTF("pci_nvme: read invalid offset %ld", offset);
WPRINTF("%s pci alloc mem bar failed", __func__);
WPRINTF("%s pci add msixcap failed", __func__);
WPRINTF("%s pci add Express capability failed", __func__);
WPRINTF("%s: clamping number of SQ from %u to %u",
WPRINTF("%s: SQ allocation failed", __func__);
WPRINTF("%s: clamping number of CQ from %u to %u",
WPRINTF("%s: CQ allocation failed", __func__);
WPRINTF(("VTCON_PORT_READY event for unknown port %d",
WPRINTF(("%s: invalid descriptor: %d", __func__, n));
WPRINTF(("%s: failed gettimeofday", __func__));
WPRINTF(("%s: failed to write host_event", __func__));
WPRINTF(("%s: read to invalid offset/size %d/%d", __func__,
WPRINTF(("%s: write to readonly reg %d", __func__, offset));
WPRINTF(("%s: realloc memory for eventqueue failed!",
WPRINTF((
WPRINTF(("%s: invalid descriptor: %d", __func__, n));
WPRINTF(
WPRINTF(("%s: invalid descriptor length: %lu", __func__,
WPRINTF(("%s: event read failed! len = %d, errno = %d",
WPRINTF(("%s: missing required path config value", __func__));
WPRINTF(("%s: failed to open %s", __func__, sc->vsc_evdev));
WPRINTF(("%s: %s is no evdev", __func__, sc->vsc_evdev));
WPRINTF(("%s: failed to grab %s", __func__, sc->vsc_evdev));
WPRINTF(("%s: init mutexattr failed", __func__));
WPRINTF(("%s: settype mutexattr failed", __func__));
WPRINTF(("%s: init mutex failed", __func__));
WPRINTF(("%s: failed to alloc eventqueue", __func__));
WPRINTF(("%s: could not register mevent", __func__));
WPRINTF((
WPRINTF(("vtrnd: /dev/random not ready, read(): %d", len));
WPRINTF("No virtio-scsi backends available");
WPRINTF("No such virtio-scsi backend: %s", value);
WPRINTF("pci_vtscsi_tmf_handle: invalid subtype %u",
WPRINTF("pci_vtscsi_tmf_hdl: unexpected response from "
WPRINTF("ignoring truncated control request");
WPRINTF("ignoring TMF request with size %zu", bufsize);
WPRINTF("ignoring AN request with size %zu", bufsize);
WPRINTF("ignoring unknown control request type = %u", type);
WPRINTF("ignoring request with insufficient output");
WPRINTF("ignoring request with incomplete header");
#define DPRINTF(msg, params...) if (pci_vtscsi_debug) WPRINTF(msg, ##params)
WPRINTF("CTL_IO: err=%d (%s)", errno, strerror(errno));
WPRINTF("CTL_IO: err=%d (%s)", errno, strerror(errno));
WPRINTF("USCSIMAXXFER: unexpected error: errno=%d (%s)",
WPRINTF("USCSICMD: unexpected TMF error, errno=%d (%s)",
WPRINTF("failed to allocate buffer for ext_data");
WPRINTF("USCSICMD: unexpected task attr in request: 0x%x",
WPRINTF("USCSICMD: unexpected I/O error: errno=%d (%s)",
WPRINTF("ioctl viona set_msi %d failed %d", ring, errno);
WPRINTF("ioctl viona ring 0x%x kick failed %d", ring, errno);
WPRINTF("Uninstall ioport hook fail %d", errno);
WPRINTF("Install ioport hook at 0x%x failed %d",
WPRINTF("Uninstall MMIO hook fail %d", errno);
WPRINTF(
WPRINTF("ioctl get host features returned err = %d", errno);
WPRINTF("ioctl feature negotiation returned err = %d", errno);
WPRINTF("ioctl viona ring 0x%x reset failed %d",
WPRINTF("error setting viona use pairs(0x%x): %s",
WPRINTF("Failed to allocate memory changing queues from "
WPRINTF("error setting viona queue pairs(0x%x): %s",
WPRINTF("ioctl viona set promisc failed %d", errno);
WPRINTF("pci_viona_poll_thread poll() error %d",
WPRINTF("ioctl viona vq %d intr "
WPRINTF("ioctl viona ring 0x%x init failed %d", qnum, errno);
WPRINTF("open viona ctl failed: %d", errno);
WPRINTF(
WPRINTF("ioctl viona create failed %d", errno);
WPRINTF("virtio-viona: vnic required");
WPRINTF("Failed to allocate memory for soft state");
WPRINTF("could not open /dev/dld");
WPRINTF("dladm_name2info() for %s failed: %s", vnic,
WPRINTF("dladm_vnic_info() for %s failed: %s", vnic,
WPRINTF("error setting viona MTU(%u): %s",
WPRINTF(("pci_xhci: write RO-CAPs offset %ld", offset));
WPRINTF(("pci_xhci: write invalid offset %ld", offset));
WPRINTF(("pci_xhci: read invalid offset %ld", offset));
WPRINTF(("pci_xhci max number of USB 2 or 3 "
WPRINTF(("pci_xhci max number of USB 2 devices "
WPRINTF(("pci_xhci max number of USB 3 devices "
WPRINTF(("pci_xhci no USB devices configured"));
WPRINTF(("pci_xhci controller already defined"));
WPRINTF(("pci_xhci: portregs_write to unpowered "