DORQ_REG_DB_DROP_REASON
#define DORQ_REG_DB_DROP_REASON 0x100a2cUL //Access:R DataWidth:0x14 // Sticky status of drop reason (a bit per reason). It is reset on write to db_drop_details_rel. 0 - Size of the data is not equal to 4 or to a multiple of 8 bytes; 1 - 2 LSB-s of the address are not zeroes (no DWORD alignment); 2 - The size of the data in the transaction is a multiple of 8 bytes and the 3 LSB-s of the address are not zeroes (not QWORD aligned); 3 - ICID is out of maximum allowed range; 4 - PWM doorbell to reserved register; 5 - Size miss-match: 32b doorbell (non-DPM) written to 64b register (non-DPM or DPM). Will be distinguished as the write with (pxp_dorq_eop_bvalid=4) to 64b PWM register; 6 - DPI check is not supported for this connection/task type and DPI is not zero; 7 - Non-first DPM doorbell and FIFO fill level (in QREG-s) is above a threshold (dpm
#define DORQ_REG_DB_DROP_REASON 0x100a2cUL //Access:R DataWidth:0x14 Sticky status of drop reason (a bit per reason). It is reset on write to db_drop_details_rel. 0 - Size of the data is not equal to 4 or to a multiple of 8 bytes; 1 - 2 LSB-s of the address are not zeroes (no DWORD alignment); 2 - The size of the data in the transaction is a multiple of 8 bytes and the 3 LSB-s of the address are not zeroes (not QWORD aligned); 3 - ICID is out of maximum allowed range; 4 - PWM doorbell to reserved register; 5 - Size miss-match: 32b doorbell (non-DPM) written to 64b register (non-DPM or DPM). Will be distinguished as the write with (pxp_dorq_eop_bvalid=4) to 64b PWM register; 6 - DPI check is not supported for this connection/task type and DPI is not zero; 7 - Non-first DPM doorbell and FIFO fill level (in QREG-s) is above a threshold (dpm_ent_abrt_th). 8 - Non-first DPM doorbell and XCM doorbell counter is above the threshold (dpm_xcm_db_abrt_th); 9 - PF doorbell appears and its corresponding PF sticky overflow bit (pf_ovfl_sticky[pf]) is set; 10 - VF doorbell appears and its corresponding VF sticky overflow bit (vf_ovfl_sticky[vf]) is set or its corresponding parent PF sticky overflow bit (pf_ovfl_sticky[pf]) is set (or both); 11 - PF doorbell appears and its corresponding PF is disabled in pf_db_en; 12 - VF doorbell appears and its corresponding PF is disabled in pf_db_en or its VF is disabled in vf_db_en; 13 - Global overflow; 14 - The first byte enable field is not equal to all ones; 15 - The length (in DWORD-s) of the transaction is more than 1 payload DWORD and the last byte enable is not equal to all ones 16 - Autodrop 17 - Non first DPM doorbell arrived and there is no matching DPM entry 18 - Non first DPM doorbell arrived and non-contigious offset in a DPM transaction 19 - Non first DPM doorbell arrived beyond the DPM size Chips: BB_A0 BB_B0 K2
#define DORQ_REG_DB_DROP_REASON 0x100a2cUL //Access:R DataWidth:0x14 // Sticky status of drop reason (a bit per reason). It is reset on write to db_drop_details_rel. 0 - Size of the data is not equal to 4 or to a multiple of 8 bytes; 1 - 2 LSB-s of the address are not zeroes (no DWORD alignment); 2 - The size of the data in the transaction is a multiple of 8 bytes and the 3 LSB-s of the address are not zeroes (not QWORD aligned); 3 - ICID is out of maximum allowed range; 4 - PWM doorbell to reserved register; 5 - Size miss-match: 32b doorbell (non-DPM) written to 64b register (non-DPM or DPM). Will be distinguished as the write with (pxp_dorq_eop_bvalid=4) to 64b PWM register; 6 - DPI check is not supported for this connection/task type and DPI is not zero; 7 - Non-first DPM doorbell and FIFO fill level (in QREG-s) is above a threshold (dpm_ent_abrt_th). 8 - Non-first DPM doorbell and XCM doorbell counter is above the threshold (dpm_xcm_db_abrt_th); 9 - PF doorbell appears and its corresponding PF sticky overflow bit (pf_ovfl_sticky[pf]) is set; 10 - VF doorbell appears and its corresponding VF sticky overflow bit (vf_ovfl_sticky[vf]) is set or its corresponding parent PF sticky overflow bit (pf_ovfl_sticky[pf]) is set (or both); 11 - PF doorbell appears and its corresponding PF is disabled in pf_db_en; 12 - VF doorbell appears and its corresponding PF is disabled in pf_db_en or its VF is disabled in vf_db_en; 13 - Global overflow; 14 - The first byte enable field is not equal to all ones; 15 - The length (in DWORD-s) of the transaction is more than 1 payload DWORD and the last byte enable is not equal to all ones 16 - Autodrop 17 - Non first DPM doorbell arrived and there is no matching DPM entry 18 - Non first DPM doorbell arrived and non-contigious offset in a DPM transaction 19 - Non first DPM doorbell arrived beyond the DPM size
#define DORQ_REG_DB_DROP_REASON 0x100a2cUL //Access:R DataWidth:0x14 // Sticky status of drop reason (a bit per reason). It is reset on write to db_drop_details_rel. 0 - Size of the data is not equal to 4 or to a multiple of 8 bytes; 1 - 2 LSB-s of the address are not zeroes (no DWORD alignment); 2 - The size of the data in the transaction is a multiple of 8 bytes and the 3 LSB-s of the address are not zeroes (not QWORD aligned); 3 - ICID is out of maximum allowed range; 4 - PWM doorbell to reserved register; 5 - Size miss-match: 32b doorbell (non-DPM) written to 64b register (non-DPM or DPM). Will be distinguished as the write with (pxp_dorq_eop_bvalid=4) to 64b PWM register; 6 - DPI check is not supported for this connection/task type and DPI is not zero; 7 - Non-first DPM doorbell and FIFO fill level (in QREG-s) is above a threshold (dpm_ent_abrt_th). 8 - Non-first DPM doorbell and XCM doorbell counter is above the threshold (dpm_xcm_db_abrt_th); 9 - PF doorbell appears and its corresponding PF sticky overflow bit (pf_ovfl_sticky[pf]) is set; 10 - VF doorbell appears and its corresponding VF sticky overflow bit (vf_ovfl_sticky[vf]) is set or its corresponding parent PF sticky overflow bit (pf_ovfl_sticky[pf]) is set (or both); 11 - PF doorbell appears and its corresponding PF is disabled in pf_db_en; 12 - VF doorbell appears and its corresponding PF is disabled in pf_db_en or its VF is disabled in vf_db_en; 13 - Global overflow; 14 - The first byte enable field is not equal to all ones; 15 - The length (in DWORD-s) of the transaction is more than 1 payload DWORD and the last byte enable is not equal to all ones 16 - Autodrop 17 - Non first DPM doorbell arrived and there is no matching DPM entry 18 - Non first DPM doorbell arrived and non-contigious offset in a DPM transaction 19 - Non first DPM doorbell arrived beyond the DPM size
#define DORQ_REG_DB_DROP_REASON 0x100a2cUL //Access:R DataWidth:0x14 // Sticky status of drop reason (a bit per reason). It is reset on write to db_drop_details_rel. 0 - Size of the data is not equal to 4 or to a multiple of 8 bytes; 1 - 2 LSB-s of the address are not zeroes (no DWORD alignment); 2 - The size of the data in the transaction is a multiple of 8 bytes and the 3 LSB-s of the address are not zeroes (not QWORD aligned); 3 - ICID is out of maximum allowed range; 4 - PWM doorbell to reserved register; 5 - Size miss-match: 32b doorbell (non-DPM) written to 64b register (non-DPM or DPM). Will be distinguished as the write with (pxp_dorq_eop_bvalid=4) to 64b PWM register; 6 - DPI check is not supported for this connection/task type and DPI is not zero; 7 - Non-first DPM doorbell and FIFO fill level (in QREG-s) is above a threshold (dpm_ent_abrt_th). 8 - Non-first DPM doorbell and XCM doorbell counter is above the threshold (dpm_xcm_db_abrt_th); 9 - PF doorbell appears and its corresponding PF sticky overflow bit (pf_ovfl_sticky[pf]) is set; 10 - VF doorbell appears and its corresponding VF sticky overflow bit (vf_ovfl_sticky[vf]) is set or its corresponding parent PF sticky overflow bit (pf_ovfl_sticky[pf]) is set (or both); 11 - PF doorbell appears and its corresponding PF is disabled in pf_db_en; 12 - VF doorbell appears and its corresponding PF is disabled in pf_db_en or its VF is disabled in vf_db_en; 13 - Global overflow; 14 - The first byte enable field is not equal to all ones; 15 - The length (in DWORD-s) of the transaction is more than 1 payload DWORD and the last byte enable is not equal to all ones 16 - Autodrop 17 - Non first DPM doorbell arrived and there is no matching DPM entry 18 - Non first DPM doorbell arrived and non-contigious offset in a DPM transaction 19 - Non first DPM doorbell arrived beyond the DPM size