Symbol: QM_REG_SDMCMDDATAMSB
usr/src/uts/common/io/qede/579xx/hsi/hw/reg_addr.h
47027
#define QM_REG_SDMCMDDATAMSB 0x2f1e0cUL //Access:RW DataWidth:0x20 // SDM command data msb. This reg is used for sending SDM command through the RBC. See command description in the QM EAS section SDM memory map. Required flow: (a) Poll on the SdmCmdReady bit (i.e. SdmCmdReady=1). (b) Write SdmCmdAddr, SdmCmdDataLsb and SdmCmdDataMsb (c) Send SdmCmdGo command: (1) wr value=1; and then (2) wr value=0.
usr/src/uts/common/io/qede/579xx/hsi/hw/reg_addr_ah_compile15.h
43128
#define QM_REG_SDMCMDDATAMSB 0x2f1e0cUL //Access:RW DataWidth:0x20 SDM command data msb. This reg is used for sending SDM command through the RBC. See command description in the QM EAS section SDM memory map. Required flow: (a) Poll on the SdmCmdReady bit (i.e. SdmCmdReady=1). (b) Write SdmCmdAddr, SdmCmdDataLsb and SdmCmdDataMsb (c) Send SdmCmdGo command: (1) wr value=1; and then (2) wr value=0. Chips: BB_A0 BB_B0 K2
usr/src/uts/common/io/qede/579xx/hsi/hw/reg_addr_bb.h
46010
#define QM_REG_SDMCMDDATAMSB 0x2f1e0cUL //Access:RW DataWidth:0x20 // SDM command data msb. This reg is used for sending SDM command through the RBC. See command description in the QM EAS section SDM memory map. Required flow: (a) Poll on the SdmCmdReady bit (i.e. SdmCmdReady=1). (b) Write SdmCmdAddr, SdmCmdDataLsb and SdmCmdDataMsb (c) Send SdmCmdGo command: (1) wr value=1; and then (2) wr value=0.
usr/src/uts/common/io/qede/579xx/hsi/hw/reg_addr_e5.h
46010
#define QM_REG_SDMCMDDATAMSB 0x2f1e0cUL //Access:RW DataWidth:0x20 // SDM command data msb. This reg is used for sending SDM command through the RBC. See command description in the QM EAS section SDM memory map. Required flow: (a) Poll on the SdmCmdReady bit (i.e. SdmCmdReady=1). (b) Write SdmCmdAddr, SdmCmdDataLsb and SdmCmdDataMsb (c) Send SdmCmdGo command: (1) wr value=1; and then (2) wr value=0.
usr/src/uts/common/io/qede/579xx/hsi/hw/reg_addr_k2.h
46010
#define QM_REG_SDMCMDDATAMSB 0x2f1e0cUL //Access:RW DataWidth:0x20 // SDM command data msb. This reg is used for sending SDM command through the RBC. See command description in the QM EAS section SDM memory map. Required flow: (a) Poll on the SdmCmdReady bit (i.e. SdmCmdReady=1). (b) Write SdmCmdAddr, SdmCmdDataLsb and SdmCmdDataMsb (c) Send SdmCmdGo command: (1) wr value=1; and then (2) wr value=0.