MISC_REG_XMAC_CORE_PORT_MODE
#define MISC_REG_XMAC_CORE_PORT_MODE 0xa964UL //ACCESS:RW DataWidth:0x2 Description: XMAC Core port mode. Indicates the number of ports on the system side. This should be less than or equal to phy_port_mode; if some of the ports are not used. This enables reduction of frequency on the core side. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap input for the XMAC_MP core; and should be changed only while reset is held low. Reset on Hard reset.
#define MISC_REG_XMAC_CORE_PORT_MODE 0x008c08UL //Access:RW DataWidth:0x2 XMAC Core port mode. Indicates the number of ports on the system side. This should be less than or equal to phy_port_mode; if some of the ports are not used. This enables reduction of frequency on the core side. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap input for the XMAC_MP core; and should be changed only while reset is held low. Reset on Hard reset. Not used. Chips: BB_A0 BB_B0
#define MISC_REG_XMAC_CORE_PORT_MODE 0x008c08UL //Access:RW DataWidth:0x2 // XMAC Core port mode. Indicates the number of ports on the system side. This should be less than or equal to phy_port_mode; if some of the ports are not used. This enables reduction of frequency on the core side. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap input for the XMAC_MP core; and should be changed only while reset is held low. Reset on Hard reset. Not used.
#define MISC_REG_XMAC_CORE_PORT_MODE 0x008c08UL //Access:RW DataWidth:0x2 // XMAC Core port mode. Indicates the number of ports on the system side. This should be less than or equal to phy_port_mode; if some of the ports are not used. This enables reduction of frequency on the core side. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap input for the XMAC_MP core; and should be changed only while reset is held low. Reset on Hard reset. Not used.
#define MISC_REG_XMAC_CORE_PORT_MODE 0x008c08UL //Access:RW DataWidth:0x2 // XMAC Core port mode. Indicates the number of ports on the system side. This should be less than or equal to phy_port_mode; if some of the ports are not used. This enables reduction of frequency on the core side. This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 - Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap input for the XMAC_MP core; and should be changed only while reset is held low. Reset on Hard reset. Not used.