MISCS_REG_RESET_PL_UA
#define MISCS_REG_RESET_PL_UA 0x009050UL //Access:RW DataWidth:0x20 // Reset_reg: Shared blocks which are reset only by the MCP (PL=UA); Read: read one = the specific block is out of reset; read zero = the specific block is in reset; Write: addr0 ("wr"): writing "0" resets the corresponding block, writing "1" takes a block out of reset. addr1 ("set"): writing "0" doesn't change the reset state of the corresponding block, writing "1" takes a block out of reset. addr2 ("clear"): writing "0" doesn't change the reset state of the corresponding block, writing "1" resets the block. addr 3-ignore; The order of the bits is: [0] rst_cgrc; [1] rst_mcp_n_reset_reg_hard_core; [2] rst_mcp_n_hard_core_rst_b; [3] rst_mcp_n_reset_cmn_cpu; [4] rst_mcp_n_reset_cmn_core; [5] rst_misc_core; [6] rst_dbue (UART); [7] rst_bmb; [8] rst_ipc; [9]rst_crbcn; [10] re
#define MISCS_REG_RESET_PL_UA 0x009050UL //Access:RW DataWidth:0x20 Reset_reg: Shared blocks which are reset only by the MCP (PL=UA); Read: read one = the specific block is out of reset; read zero = the specific block is in reset; Write: addr0 ("wr"): writing "0" resets the corresponding block, writing "1" takes a block out of reset. addr1 ("set"): writing "0" doesn't change the reset state of the corresponding block, writing "1" takes a block out of reset. addr2 ("clear"): writing "0" doesn't change the reset state of the corresponding block, writing "1" resets the block. addr 3-ignore; The order of the bits is: [0] rst_cgrc; [1] rst_mcp_n_reset_reg_hard_core; [2] rst_mcp_n_hard_core_rst_b; [3] rst_mcp_n_reset_cmn_cpu; [4] rst_mcp_n_reset_cmn_core; [5] rst_misc_core; [6] rst_dbue (UART); [7] rst_bmb; [8] rst_ipc; [9]rst_crbcn; [10] reserved; [11] rst_avs; [31-10] reserved; Global register. Chips: BB_A0 BB_B0 K2
#define MISCS_REG_RESET_PL_UA 0x009050UL //Access:RW DataWidth:0x20 // Reset_reg: Shared blocks which are reset only by the MCP (PL=UA); Read: read one = the specific block is out of reset; read zero = the specific block is in reset; Write: addr0 ("wr"): writing "0" resets the corresponding block, writing "1" takes a block out of reset. addr1 ("set"): writing "0" doesn't change the reset state of the corresponding block, writing "1" takes a block out of reset. addr2 ("clear"): writing "0" doesn't change the reset state of the corresponding block, writing "1" resets the block. addr 3-ignore; The order of the bits is: [0] rst_cgrc; [1] rst_mcp_n_reset_reg_hard_core; [2] rst_mcp_n_hard_core_rst_b; [3] rst_mcp_n_reset_cmn_cpu; [4] rst_mcp_n_reset_cmn_core; [5] rst_misc_core; [6] rst_dbue (UART); [7] rst_bmb; [8] rst_ipc; [9]rst_crbcn; [10] rst_n_miscs_rbc_vaux_pd_ars (rst_n_miscs_rbc_nmc_pd_ars,rst_n_miscs_rbc_host_pd_ars); [11] rst_n_misc_rbc_avs; [31-12] reserved; Global register.
#define MISCS_REG_RESET_PL_UA 0x009050UL //Access:RW DataWidth:0x20 // Reset_reg: Shared blocks which are reset only by the MCP (PL=UA); Read: read one = the specific block is out of reset; read zero = the specific block is in reset; Write: addr0 ("wr"): writing "0" resets the corresponding block, writing "1" takes a block out of reset. addr1 ("set"): writing "0" doesn't change the reset state of the corresponding block, writing "1" takes a block out of reset. addr2 ("clear"): writing "0" doesn't change the reset state of the corresponding block, writing "1" resets the block. addr 3-ignore; The order of the bits is: [0] rst_cgrc; [1] rst_mcp_n_reset_reg_hard_core; [2] rst_mcp_n_hard_core_rst_b; [3] rst_mcp_n_reset_cmn_cpu; [4] rst_mcp_n_reset_cmn_core; [5] rst_misc_core; [6] rst_dbue (UART); [7] rst_bmb; [8] rst_ipc; [9]rst_crbcn; [10] reserved; [11] rst_avs; [31-10] reserved; Global register.
#define MISCS_REG_RESET_PL_UA 0x009050UL //Access:RW DataWidth:0x20 // Reset_reg: Shared blocks which are reset only by the MCP (PL=UA); Read: read one = the specific block is out of reset; read zero = the specific block is in reset; Write: addr0 ("wr"): writing "0" resets the corresponding block, writing "1" takes a block out of reset. addr1 ("set"): writing "0" doesn't change the reset state of the corresponding block, writing "1" takes a block out of reset. addr2 ("clear"): writing "0" doesn't change the reset state of the corresponding block, writing "1" resets the block. addr 3-ignore; The order of the bits is: [0] rst_cgrc; [1] rst_mcp_n_reset_reg_hard_core; [2] rst_mcp_n_hard_core_rst_b; [3] rst_mcp_n_reset_cmn_cpu; [4] rst_mcp_n_reset_cmn_core; [5] rst_misc_core; [6] rst_dbue (UART); [7] rst_bmb; [8] rst_ipc; [9]rst_crbcn; [10] reserved; [11] rst_avs; [31-10] reserved; Global register.