src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

128

TRACE_ERROR("_DevicePresent: writing registers failed\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

133

TRACE_ERROR("_DevicePresent: reading registers failed\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

154

TRACE_ERROR("resetting the channel failed\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

202

TRACE_ERROR("reading status failed\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

208

TRACE_ERROR("device 0 indicates that device 1 failed"

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

211

TRACE_ERROR("device %d failed, error code is 0x%02x\n",

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

226

TRACE_ERROR("out of memory allocating device\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

238

TRACE_ERROR("failed to configure device\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

311

TRACE_ERROR("invalid target device\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

319

TRACE_ERROR("target device not present\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

359

TRACE_ERROR("writing register failed when trying to select device %d\n",

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

375

TRACE_ERROR("reading register failed when detecting selected device\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

397

TRACE_ERROR("failed to set reset signaling\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

405

TRACE_ERROR("failed to clear reset signaling\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

45

TRACE_ERROR("unknown if controller supports DMA, not using it\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

552

TRACE_ERROR("timeout waiting for interrupt\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

573

TRACE_ERROR("RecoverLostInterrupt: device busy, status 0x%02x\n", status);

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

576

TRACE_ERROR("RecoverLostInterrupt: lost interrupt, status 0x%02x\n", status);

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

597

TRACE_ERROR("device selection failed\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

604

TRACE_ERROR("device selection timeout\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

612

TRACE_ERROR("device ready not set\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

620

TRACE_ERROR("can't write command\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

638

TRACE_ERROR("timeout waiting for request finish\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

676

TRACE_ERROR("command failed, error bit is set. status 0x%02x, error 0x%02x\n",

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

682

TRACE_ERROR("interface crc error\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

765

TRACE_ERROR("failed to write pio block\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

771

TRACE_ERROR("failed to read pio block\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

783

TRACE_ERROR("timeout waiting for device to request data\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

791

TRACE_ERROR("device still expects data transfer\n");

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

897

TRACE_ERROR("pio read: discarding after %lu bytes\n", transferred);

src/add-ons/kernel/bus_managers/ata/ATAChannel.cpp

947

TRACE_ERROR("pio write: discarding after %lu bytes\n", transferred);

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

241

TRACE_ERROR("invalid target lun %d for ATA device\n", ccb->target_lun);

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

418

TRACE_ERROR("device %d not selected!\n", fIndex);

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

441

TRACE_ERROR("sending set feature request failed\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

448

TRACE_ERROR("set feature request failed\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

466

TRACE_ERROR("failed to disable release interrupt\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

475

TRACE_ERROR("failed to disable service interrupt\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

48

TRACE_ERROR("failed to send test unit ready request\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

521

TRACE_ERROR("more than one DMA mode selected, not using DMA\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

541

TRACE_ERROR("infoblock indicates non-ata device\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

548

TRACE_ERROR("non-lba devices not supported\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

588

TRACE_ERROR("sending identify request failed\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

602

TRACE_ERROR("timeout waiting for identify request\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

610

TRACE_ERROR("device disagrees on info block length\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

617

TRACE_ERROR("failed to finish identify request\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

651

TRACE_ERROR("failed to setup transfer request\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

660

TRACE_ERROR("failed to send transfer request\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

693

TRACE_ERROR("timeout waiting for device to request data\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

699

TRACE_ERROR("executing pio transfer failed\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

731

TRACE_ERROR("invalid sector count %lu\n", sectorCount);

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

755

TRACE_ERROR("invalid sector count %lu\n", sectorCount);

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

76

TRACE_ERROR("failed to send synchronize cache request\n");

src/add-ons/kernel/bus_managers/ata/ATADevice.cpp

96

TRACE_ERROR("failed to send eject request\n");

src/add-ons/kernel/bus_managers/ata/ATAModule.cpp

172

TRACE_ERROR("controller name missing\n");

src/add-ons/kernel/bus_managers/ata/ATAModule.cpp

178

TRACE_ERROR("out of channel ids\n");

src/add-ons/kernel/bus_managers/ata/ATAModule.cpp

26

TRACE_ERROR("failed to set up ata channel object\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

114

TRACE_ERROR("device indicates transfer error after dma\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

125

TRACE_ERROR("dma transfer failed\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

141

TRACE_ERROR("timeout waiting for device to request data\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

154

TRACE_ERROR("device expecting command instead of data\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

169

TRACE_ERROR("timeout waiting for device to finish transfer\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

192

TRACE_ERROR("invalid target lun %d\n", ccb->target_lun);

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

212

TRACE_ERROR("infoblock indicates non-atapi device\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

46

TRACE_ERROR("failed to setup transfer request\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

54

TRACE_ERROR("failed to send packet request\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

63

TRACE_ERROR("timeout waiting for data request\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

77

TRACE_ERROR("device doesn't ask for packet\n");

src/add-ons/kernel/bus_managers/ata/ATAPIDevice.cpp

90

TRACE_ERROR("failed to write packet\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

109

TRACE_ERROR("freeing address %d which was not allocated\n", address);

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

124

TRACE_ERROR("could not allocate an address\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

132

TRACE_ERROR("error getting the default pipe for speed %d\n", speed);

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

159

TRACE_ERROR("error while setting device address\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

191

TRACE_ERROR("error while getting the device descriptor\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

211

TRACE_ERROR("no memory to allocate hub\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

217

TRACE_ERROR("hub failed init check\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

232

TRACE_ERROR("no memory to allocate device\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

238

TRACE_ERROR("device failed init check\n");

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

334

TRACE_ERROR("failed to allocate default pipe for speed %d\n", speed);

src/add-ons/kernel/bus_managers/usb/BusManager.cpp

92

TRACE_ERROR("the busmanager has run out of device addresses\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

110

TRACE_ERROR("out of memory when reading config\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

118

TRACE_ERROR("error fetching full configuration"

src/add-ons/kernel/bus_managers/usb/Device.cpp

132

TRACE_ERROR("out of memory when creating interfaces\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

172

TRACE_ERROR("Corrected invalid interface_number!\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

184

TRACE_ERROR("out of memory allocating"

src/add-ons/kernel/bus_managers/usb/Device.cpp

207

TRACE_ERROR("failed to allocate"

src/add-ons/kernel/bus_managers/usb/Device.cpp

245

TRACE_ERROR("out of memory allocating new endpoint\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

267

TRACE_ERROR("found endpoint companion descriptor "

src/add-ons/kernel/bus_managers/usb/Device.cpp

300

TRACE_ERROR("out of memory allocating"

src/add-ons/kernel/bus_managers/usb/Device.cpp

322

TRACE_ERROR("failed to set default configuration\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

335

TRACE_ERROR("failed to unregister device node\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

38

TRACE_ERROR("could not allocate default pipe\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

52

TRACE_ERROR("error while getting the device descriptor\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

561

TRACE_ERROR("SuperSpeed device without an endpoint companion "

src/add-ons/kernel/bus_managers/usb/Device.cpp

590

TRACE_ERROR("failed to allocate pipe\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

76

TRACE_ERROR("out of memory during config creations!\n");

src/add-ons/kernel/bus_managers/usb/Device.cpp

90

TRACE_ERROR("error fetching configuration %" B_PRId32 "\n", i);

src/add-ons/kernel/bus_managers/usb/Device.cpp

950

TRACE_ERROR("failed to register device node\n");

src/add-ons/kernel/bus_managers/usb/Hub.cpp

138

TRACE_ERROR("error updating port status\n");

src/add-ons/kernel/bus_managers/usb/Hub.cpp

171

TRACE_ERROR("port %d won't reset (%#x, %#x)\n", index,

src/add-ons/kernel/bus_managers/usb/Hub.cpp

234

TRACE_ERROR("debouncing port %" B_PRId32

src/add-ons/kernel/bus_managers/usb/Hub.cpp

242

TRACE_ERROR("resetting port %" B_PRId32 " failed\n",

src/add-ons/kernel/bus_managers/usb/Hub.cpp

258

TRACE_ERROR("new device on a port that is already in "

src/add-ons/kernel/bus_managers/usb/Hub.cpp

32

TRACE_ERROR("device failed to initialize\n");

src/add-ons/kernel/bus_managers/usb/Hub.cpp

40

TRACE_ERROR("wrong class! bailing out\n");

src/add-ons/kernel/bus_managers/usb/Hub.cpp

51

TRACE_ERROR("error getting hub descriptor\n");

src/add-ons/kernel/bus_managers/usb/Hub.cpp

92

TRACE_ERROR("power up failed on port %" B_PRId32 "\n", i);

src/add-ons/kernel/bus_managers/usb/Object.cpp

64

TRACE_ERROR("set feature called\n");

src/add-ons/kernel/bus_managers/usb/Object.cpp

73

TRACE_ERROR("clear feature called\n");

src/add-ons/kernel/bus_managers/usb/Object.cpp

82

TRACE_ERROR("get status called\n");

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

145

TRACE_ERROR(("PMA: bad value for allocate (%ld bytes)\n", size));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

210

TRACE_ERROR(("PMA: found no free slot to store %ld bytes, waiting\n",

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

222

TRACE_ERROR(("PMA: timed out waiting for a free slot, giving up\n"));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

239

TRACE_ERROR(("PMA: bad value for deallocate (%ld bytes)\n", size));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

257

TRACE_ERROR(("PMA: no value given for either physical or logical address\n"));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

263

TRACE_ERROR(("PMA: provided address resulted in invalid index\n"));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

269

TRACE_ERROR(("PMA: address was not allocated!\n"));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

82

TRACE_ERROR(("PMA: failed to create memory area\n"));

src/add-ons/kernel/bus_managers/usb/PhysicalMemoryAllocator.cpp

88

TRACE_ERROR(("PMA: failed to get memory map\n"));

src/add-ons/kernel/bus_managers/usb/Pipe.cpp

445

TRACE_ERROR("timeout waiting for queued request to complete\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

129

TRACE_ERROR("the stack has run out of usb_ids\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

143

TRACE_ERROR("tried to put an invalid usb_id\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

148

TRACE_ERROR("tried to put an object with incorrect usb_id\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

177

TRACE_ERROR("tried to get object with invalid usb_id\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

322

TRACE_ERROR("couldn't allocate area %s\n", name);

src/add-ons/kernel/bus_managers/usb/Stack.cpp

330

TRACE_ERROR("couldn't map area %s\n", name);

src/add-ons/kernel/bus_managers/usb/Stack.cpp

38

TRACE_ERROR("failed to create semaphore\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

45

TRACE_ERROR("failed to allocate object array\n");

src/add-ons/kernel/bus_managers/usb/Stack.cpp

54

TRACE_ERROR("failed to allocate the allocator\n");

src/add-ons/kernel/bus_managers/usb/Transfer.cpp

179

TRACE_ERROR("failed to find area for user space buffer!\n");

src/add-ons/kernel/bus_managers/usb/Transfer.cpp

192

TRACE_ERROR("couldn't get user area info\n");

src/add-ons/kernel/bus_managers/usb/Transfer.cpp

201

TRACE_ERROR("data buffer spans across multiple areas!\n");

src/add-ons/kernel/bus_managers/usb/Transfer.cpp

79

TRACE_ERROR("can't calculate bandwidth\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1102

TRACE_ERROR("failed to allocate queue head\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1108

TRACE_ERROR("failed to init queue head\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1124

TRACE_ERROR("failed to fill transfer queue with data\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1132

TRACE_ERROR("failed to add pending transfer\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1148

TRACE_ERROR("failed to link queue head\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1171

TRACE_ERROR(

src/add-ons/kernel/busses/usb/ehci.cpp

1240

TRACE_ERROR("unable to allocate itd buffer\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1309

TRACE_ERROR("failed to add pending isochronous transfer\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1509

TRACE_ERROR("port reset won't complete\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1619

TRACE_ERROR("host system error!\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1677

TRACE_ERROR("cannot submit transfer: a fragmented transfer is queued\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1822

TRACE_ERROR("no isochronous transfer found!\n");

src/add-ons/kernel/busses/usb/ehci.cpp

1897

TRACE_ERROR("qtd (0x%" B_PRIx32 ") error: 0x%08" B_PRIx32

src/add-ons/kernel/busses/usb/ehci.cpp

1928

TRACE_ERROR("error counter counted down to zero "

src/add-ons/kernel/busses/usb/ehci.cpp

2252

TRACE_ERROR("failed to allocate queue head\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2263

TRACE_ERROR("failed to allocate initial qtd for queue head\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2298

TRACE_ERROR("unknown pipe speed\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2447

TRACE_ERROR("failed to allocate descriptors\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2653

TRACE_ERROR("failed to allocate a qtd\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2679

TRACE_ERROR("unable to allocate qtd buffer\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2775

TRACE_ERROR("failed to allocate a itd\n");

src/add-ons/kernel/busses/usb/ehci.cpp

2794

TRACE_ERROR("failed to allocate a sitd\n");

src/add-ons/kernel/busses/usb/ehci.cpp

364

TRACE_ERROR("bus manager failed to init\n");

src/add-ons/kernel/busses/usb/ehci.cpp

443

TRACE_ERROR("failed to map register memory\n");

src/add-ons/kernel/busses/usb/ehci.cpp

492

TRACE_ERROR("bios won't give up control over the host "

src/add-ons/kernel/busses/usb/ehci.cpp

517

TRACE_ERROR("host controller failed to reset\n");

src/add-ons/kernel/busses/usb/ehci.cpp

529

TRACE_ERROR("failed to create semaphores\n");

src/add-ons/kernel/busses/usb/ehci.cpp

542

TRACE_ERROR("failed to create isochronous finisher semaphore\n");

src/add-ons/kernel/busses/usb/ehci.cpp

626

TRACE_ERROR("unable to allocate periodic framelist\n");

src/add-ons/kernel/busses/usb/ehci.cpp

753

TRACE_ERROR("unable to allocate stray async queue head\n");

src/add-ons/kernel/busses/usb/ehci.cpp

871

TRACE_ERROR("host controller didn't start\n");

src/add-ons/kernel/busses/usb/ehci.cpp

882

TRACE_ERROR("no memory to allocate root hub\n");

src/add-ons/kernel/busses/usb/ehci.cpp

887

TRACE_ERROR("root hub failed init check\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1192

TRACE_ERROR("td error: 0x%08" B_PRIx32 "\n", status);

src/add-ons/kernel/busses/usb/ohci.cpp

1359

TRACE_ERROR("ITD error: 0x%08" B_PRIx32 "\n", status);

src/add-ons/kernel/busses/usb/ohci.cpp

1468

TRACE_ERROR("failed to allocate setup descriptor\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1479

TRACE_ERROR("failed to allocate status descriptor\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1527

TRACE_ERROR("failed to add pending transfer\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1583

TRACE_ERROR("cannot submit transfer: a fragmented transfer is queued\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1594

TRACE_ERROR("failed to add pending transfer\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1648

TRACE_ERROR("failed to add pending iso.transfer:"

src/add-ons/kernel/busses/usb/ohci.cpp

1793

TRACE_ERROR("no memory to allocate endpoint lock\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1800

TRACE_ERROR("failed to allocate endpoint descriptor\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1841

TRACE_ERROR("cannot allocate memory for endpoint\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1866

TRACE_ERROR("direction unknown\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1882

TRACE_ERROR("unacceptable speed\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1903

TRACE_ERROR("unknown pipe type\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1906

TRACE_ERROR("no list found for endpoint\n");

src/add-ons/kernel/busses/usb/ohci.cpp

1991

TRACE_ERROR("failed to allocate general descriptor\n");

src/add-ons/kernel/busses/usb/ohci.cpp

2008

TRACE_ERROR("failed to allocate space for buffer\n");

src/add-ons/kernel/busses/usb/ohci.cpp

2101

TRACE_ERROR("failed to allocate isochronous descriptor\n");

src/add-ons/kernel/busses/usb/ohci.cpp

2119

TRACE_ERROR("failed to allocate space for iso.buffer\n");

src/add-ons/kernel/busses/usb/ohci.cpp

2159

TRACE_ERROR("isochronous packet_count should not be equal to zero.");

src/add-ons/kernel/busses/usb/ohci.cpp

2168

TRACE_ERROR("isochronous packetSize %ld is bigger"

src/add-ons/kernel/busses/usb/ohci.cpp

2207

TRACE_ERROR("failed to allocate bandwidth\n");

src/add-ons/kernel/busses/usb/ohci.cpp

2218

TRACE_ERROR("failed to allocate ITD\n");

src/add-ons/kernel/busses/usb/ohci.cpp

298

TRACE_ERROR("bus manager failed to init\n");

src/add-ons/kernel/busses/usb/ohci.cpp

323

TRACE_ERROR("failed to map register memory\n");

src/add-ons/kernel/busses/usb/ohci.cpp

336

TRACE_ERROR("unsupported OHCI revision\n");

src/add-ons/kernel/busses/usb/ohci.cpp

345

TRACE_ERROR("unable to create the HCCA block area\n");

src/add-ons/kernel/busses/usb/ohci.cpp

374

TRACE_ERROR("failed to allocate memory for interrupt endpoints\n");

src/add-ons/kernel/busses/usb/ohci.cpp

384

TRACE_ERROR("failed to allocate interrupt endpoint %" B_PRId32 "\n",

src/add-ons/kernel/busses/usb/ohci.cpp

446

TRACE_ERROR("smm does not respond.\n");

src/add-ons/kernel/busses/usb/ohci.cpp

479

TRACE_ERROR("error resetting the host controller (timeout)\n");

src/add-ons/kernel/busses/usb/ohci.cpp

536

TRACE_ERROR("failed to create semaphore\n");

src/add-ons/kernel/busses/usb/ohci.cpp

624

TRACE_ERROR("controller not started (0x%08" B_PRIx32 ")!\n", control);

src/add-ons/kernel/busses/usb/ohci.cpp

632

TRACE_ERROR("no memory to allocate root hub\n");

src/add-ons/kernel/busses/usb/ohci.cpp

637

TRACE_ERROR("root hub failed init check\n");

src/add-ons/kernel/busses/usb/ohci.cpp

674

TRACE_ERROR("tried to submit transfer for unknown pipe type %" B_PRIu32 "\n",

src/add-ons/kernel/busses/usb/ohci.cpp

787

TRACE_ERROR("unknown pipe change!\n");

src/add-ons/kernel/busses/usb/ohci.cpp

799

TRACE_ERROR("get port status for invalid port %u\n", index);

src/add-ons/kernel/busses/usb/uhci.cpp

1073

TRACE_ERROR("no isochronous transfer found!\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1092

TRACE_ERROR("failed to allocate descriptors\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1143

TRACE_ERROR("failed to add pending transfer\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1191

TRACE_ERROR("cannot submit transfer: a fragmented transfer is queued\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1266

TRACE_ERROR("isochronous packetSize is bigger than pipe MaxPacketSize\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1354

TRACE_ERROR("not enough bandwidth to queue the isochronous request");

src/add-ons/kernel/busses/usb/uhci.cpp

1369

TRACE_ERROR("failed to add pending isochronous transfer\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1385

TRACE_ERROR("failed to add pending isochronous transfer\n");

src/add-ons/kernel/busses/usb/uhci.cpp

1524

TRACE_ERROR("td (0x%08" B_PRIx32 ") error: status: 0x%08"

src/add-ons/kernel/busses/usb/uhci.cpp

2153

TRACE_ERROR("failed to allocate a transfer descriptor\n");

src/add-ons/kernel/busses/usb/uhci.cpp

2188

TRACE_ERROR("unable to allocate space for the buffer\n");

src/add-ons/kernel/busses/usb/uhci.cpp

376

TRACE_ERROR("failed to allocate a stray transfer descriptor\n");

src/add-ons/kernel/busses/usb/uhci.cpp

542

TRACE_ERROR("bus manager failed to init\n");

src/add-ons/kernel/busses/usb/uhci.cpp

574

TRACE_ERROR("host failed to reset\n");

src/add-ons/kernel/busses/usb/uhci.cpp

584

TRACE_ERROR("unable to create an area for the frame pointer list\n");

src/add-ons/kernel/busses/usb/uhci.cpp

612

TRACE_ERROR("cannot create queues\n");

src/add-ons/kernel/busses/usb/uhci.cpp

630

TRACE_ERROR("faild to allocate memory for first isochronous descriptor\n");

src/add-ons/kernel/busses/usb/uhci.cpp

636

TRACE_ERROR("failed to allocate memory for last isochronous descriptor\n");

src/add-ons/kernel/busses/usb/uhci.cpp

652

TRACE_ERROR("failed to create finisher semaphore\n");

src/add-ons/kernel/busses/usb/uhci.cpp

658

TRACE_ERROR("failed to create cleanup semaphore\n");

src/add-ons/kernel/busses/usb/uhci.cpp

675

TRACE_ERROR("failed to create isochronous finisher semaphore\n");

src/add-ons/kernel/busses/usb/uhci.cpp

798

TRACE_ERROR("controller won't start running\n");

src/add-ons/kernel/busses/usb/uhci.cpp

805

TRACE_ERROR("no memory to allocate root hub\n");

src/add-ons/kernel/busses/usb/uhci.cpp

810

TRACE_ERROR("root hub failed init check\n");

src/add-ons/kernel/busses/usb/uhci.cpp

865

TRACE_ERROR("failed to add pending transfer\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1180

TRACE_ERROR("cancel queued transfers: halted endpoint, reset!\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1205

TRACE_ERROR("cancel queued transfers: could not stop endpoint: %s!\n",

src/add-ons/kernel/busses/usb/xhci.cpp

1344

TRACE_ERROR("unknown pipe change!\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1365

TRACE_ERROR("failed to allocate a transfer descriptor\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1374

TRACE_ERROR("failed to allocate TRBs\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1396

TRACE_ERROR("unable to allocate space for buffer infos\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1411

TRACE_ERROR("unable to allocate space for large buffer (size %ld)\n",

src/add-ons/kernel/busses/usb/xhci.cpp

1427

TRACE_ERROR("unable to allocate space for a buffer (size "

src/add-ons/kernel/busses/usb/xhci.cpp

1568

TRACE_ERROR("failed to enable slot: %s\n", strerror(status));

src/add-ons/kernel/busses/usb/xhci.cpp

1573

TRACE_ERROR("AllocateDevice: bad slot\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1578

TRACE_ERROR("AllocateDevice: slot already used\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1589

TRACE_ERROR("unable to create a input context area\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1645

TRACE_ERROR("unknown usb speed\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1678

TRACE_ERROR("unable to create a device context area\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1688

TRACE_ERROR("unable to create a device trbs area\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1724

TRACE_ERROR("unable to configure default control endpoint\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1732

TRACE_ERROR("unable to set address: %s\n", strerror(status));

src/add-ons/kernel/busses/usb/xhci.cpp

1775

TRACE_ERROR("failed to get the device descriptor: %s\n",

src/add-ons/kernel/busses/usb/xhci.cpp

1816

TRACE_ERROR("error while getting the hub descriptor: %s\n",

src/add-ons/kernel/busses/usb/xhci.cpp

1843

TRACE_ERROR("no memory to allocate device\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1845

TRACE_ERROR("device object failed to initialize\n");

src/add-ons/kernel/busses/usb/xhci.cpp

1971

TRACE_ERROR("unable to configure endpoint: %s\n", strerror(status));

src/add-ons/kernel/busses/usb/xhci.cpp

2056

TRACE_ERROR("link descriptor for pipe: max transfers count exceeded\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2063

TRACE_ERROR("cannot submit transfer: a fragmented transfer is queued\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2279

TRACE_ERROR("ConfigureEndpoint() failed invalid max_burst_payload\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2439

TRACE_ERROR("USB core suspending device not in U0/U1/U2.\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2524

TRACE_ERROR("HCH shutdown timeout\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2539

TRACE_ERROR("ControllerReset() failed CMD_HCRST\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2544

TRACE_ERROR("ControllerReset() failed STS_CNR\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2572

TRACE_ERROR("Host Controller halted\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2576

TRACE_ERROR("Host System Error\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2580

TRACE_ERROR("Host Controller Error\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2664

TRACE_ERROR("received command event for unknown command!\n")

src/add-ons/kernel/busses/usb/xhci.cpp

2676

TRACE_ERROR("invalid slot\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2678

TRACE_ERROR("invalid endpoint\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2686

TRACE_ERROR("got TRB but endpoint is not allocated!\n");

src/add-ons/kernel/busses/usb/xhci.cpp

2817

TRACE_ERROR("successful TRB 0x%" B_PRIxPHYSADDR " was found, but it wasn't "

src/add-ons/kernel/busses/usb/xhci.cpp

2822

TRACE_ERROR("TRB 0x%" B_PRIxPHYSADDR " was not found in the endpoint!\n", source);

src/add-ons/kernel/busses/usb/xhci.cpp

2882

TRACE_ERROR("unsuccessful command %" B_PRId32 ", error %s (%" B_PRId32 ")\n",

src/add-ons/kernel/busses/usb/xhci.cpp

3103

TRACE_ERROR("failed to acquire event lock!\n");

src/add-ons/kernel/busses/usb/xhci.cpp

3132

TRACE_ERROR("Unhandled event = %u\n", event);

src/add-ons/kernel/busses/usb/xhci.cpp

3269

TRACE_ERROR("timeout waiting on reg 0x%" B_PRIX32

src/add-ons/kernel/busses/usb/xhci.cpp

375

TRACE_ERROR("bus manager failed to init\n");

src/add-ons/kernel/busses/usb/xhci.cpp

406

TRACE_ERROR("failed to map register memory\n");

src/add-ons/kernel/busses/usb/xhci.cpp

423

TRACE_ERROR("unsupported interface version: 0x%04" B_PRIx32 "\n",

src/add-ons/kernel/busses/usb/xhci.cpp

469

TRACE_ERROR("bios won't give up control over the host "

src/add-ons/kernel/busses/usb/xhci.cpp

509

TRACE_ERROR("host controller failed to reset\n");

src/add-ons/kernel/busses/usb/xhci.cpp

517

TRACE_ERROR("failed to create semaphores\n");

src/add-ons/kernel/busses/usb/xhci.cpp

636

TRACE_ERROR("Start() warning, starting running XHCI controller!\n");

src/add-ons/kernel/busses/usb/xhci.cpp

640

TRACE_ERROR("controller does not support 4K page size\n");

src/add-ons/kernel/busses/usb/xhci.cpp

648

TRACE_ERROR("invalid number of ports: %u\n", fPortCount);

src/add-ons/kernel/busses/usb/xhci.cpp

690

TRACE_ERROR("invalid number of scratchpads: %" B_PRIu32 "\n",

src/add-ons/kernel/busses/usb/xhci.cpp

708

TRACE_ERROR("unable to create the DCBA area\n");

src/add-ons/kernel/busses/usb/xhci.cpp

725

TRACE_ERROR("unable to create the scratchpad area\n");

src/add-ons/kernel/busses/usb/xhci.cpp

743

TRACE_ERROR("unable to create the ERST AND RING area\n");

src/add-ons/kernel/busses/usb/xhci.cpp

784

TRACE_ERROR("Command Ring still running after stop/cancel\n");

src/add-ons/kernel/busses/usb/xhci.cpp

814

TRACE_ERROR("HCH start up timeout\n");

src/add-ons/kernel/busses/usb/xhci.cpp

819

TRACE_ERROR("no memory to allocate root hub\n");

src/add-ons/kernel/busses/usb/xhci.cpp

824

TRACE_ERROR("root hub failed init check\n");

src/add-ons/kernel/busses/usb/xhci.cpp

869

TRACE_ERROR("control pipe has no endpoint!\n");

src/add-ons/kernel/busses/usb/xhci.cpp

960

TRACE_ERROR("pipe has no endpoint!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

1184

TRACE_ERROR("libnvme initialization failed!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

218

TRACE_ERROR("failed to open the controller!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

229

TRACE_ERROR("failed to get controller information!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

241

TRACE_ERROR("failed to open namespace!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

250

TRACE_ERROR("failed to get namespace information!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

285

TRACE_ERROR("device PCI:%d:%d:%d was assigned an invalid IRQ\n",

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

361

TRACE_ERROR("failed to set apst table!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

389

TRACE_ERROR("failed to allocate qpairs!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

411

TRACE_ERROR("failed to initialize DMA resource!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

418

TRACE_ERROR("failed to create DMA buffers semaphore!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

546

TRACE_ERROR("timed out waiting for interrupt!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

633

TRACE_ERROR("attempt to queue %s I/O at LBA %" B_PRIdOFF " of %" B_PRIuSIZE

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

644

TRACE_ERROR("%s at LBA %" B_PRIdOFF " of %" B_PRIuSIZE

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

700

TRACE_ERROR("I/O succeeded but IOOperation failed!\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

747

TRACE_ERROR("failed to lock memory: %s\n", strerror(status));

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

760

TRACE_ERROR("failed to allocate memory for iovecs\n");

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

782

TRACE_ERROR("I/O get_memory_map failed: %s\n", strerror(status));

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

847

TRACE_ERROR("I/O failed early: %s\n", strerror(status));

src/add-ons/kernel/drivers/disk/nvme/nvme_disk.cpp

883

TRACE_ERROR("I/O failed: %s\n", strerror(status));

src/add-ons/kernel/file_systems/udf/AllocationDescriptorList.h

134

TRACE_ERROR(("AllocationDescriptorList<>::FindExtent: "

src/add-ons/kernel/file_systems/udf/Icb.cpp

248

TRACE_ERROR(("Icb::FindBlock: error finding extent for offset "

src/add-ons/kernel/file_systems/udf/Icb.cpp

261

TRACE_ERROR(("Icb::FindBlock: error finding extent for offset "

src/add-ons/kernel/file_systems/udf/Icb.cpp

389

TRACE_ERROR(("Icb::_Read: error finding extent for offset %"

src/add-ons/kernel/file_systems/udf/Icb.cpp

411

TRACE_ERROR(("Icb::_Read(): Invalid extent type found: %d\n",

src/add-ons/kernel/file_systems/udf/Icb.cpp

448

TRACE_ERROR(("Icb::_Read: could not map extent\n"));

src/add-ons/kernel/file_systems/udf/PhysicalPartition.cpp

36

TRACE_ERROR(("PhysicalPartition::MapBlock: block %" B_PRIu32 " invalid"

src/add-ons/kernel/file_systems/udf/Recognition.cpp

119

TRACE_ERROR(("walk_volume_recognition_sequence: Failed to construct "

src/add-ons/kernel/file_systems/udf/Recognition.cpp

63

TRACE_ERROR(("\nudf_recognize: Block size must be a positive power of "

src/add-ons/kernel/file_systems/udf/Recognition.cpp

84

TRACE_ERROR(("udf_recognize: cannot find volume descriptor. status = %"

src/add-ons/kernel/file_systems/udf/Recognition.cpp

93

TRACE_ERROR(("udf_recognize: last integrity descriptor not closed. "

src/add-ons/kernel/file_systems/udf/UdfString.cpp

145

TRACE_ERROR(("UdfString::SetTo: passed NULL utf8 string\n"));

src/add-ons/kernel/file_systems/udf/UdfString.cpp

153

TRACE_ERROR(("UdfString::SetTo: fUtf8String[%" B_PRIu32

src/add-ons/kernel/file_systems/udf/UdfString.cpp

165

TRACE_ERROR(("UdfString::SetTo: uint32 raw[%" B_PRIu32 "] temporary"

src/add-ons/kernel/file_systems/udf/UdfString.cpp

207

TRACE_ERROR(("UdfString::SetTo: fCs0String[%" B_PRIu32

src/add-ons/kernel/file_systems/udf/UdfString.cpp

227

TRACE_ERROR(("UdfString::SetTo: fCs0String[%" B_PRIu32

src/add-ons/kernel/file_systems/udf/VirtualPartition.cpp

16

TRACE_ERROR(("VirtualPartition::VirtualPartition: not implemented!\n"));

src/add-ons/kernel/file_systems/udf/Volume.cpp

145

TRACE_ERROR(("Volume::Mount: no matching partition descriptor found!\n"));

src/add-ons/kernel/file_systems/udf/Volume.cpp

200

TRACE_ERROR(("Volume::Mount: metadata partition "

src/add-ons/kernel/file_systems/udf/Volume.cpp

204

TRACE_ERROR(("Volume::Mount: no matching partition descriptor found!\n"));

src/add-ons/kernel/file_systems/udf/Volume.cpp

213

TRACE_ERROR(("Invalid partition type %d found!\n", header->type()));

src/add-ons/kernel/file_systems/udf/Volume.cpp

227

TRACE_ERROR(("Invalid partition layout found:\n"));

src/add-ons/kernel/file_systems/udf/Volume.cpp

228

TRACE_ERROR((" physical partitions: %d\n", physicalCount));

src/add-ons/kernel/file_systems/udf/Volume.cpp

229

TRACE_ERROR((" virtual partitions: %d\n", virtualCount));

src/add-ons/kernel/file_systems/udf/Volume.cpp

230

TRACE_ERROR((" sparable partitions: %d\n", sparableCount));

src/add-ons/kernel/file_systems/udf/Volume.cpp

231

TRACE_ERROR((" metadata partitions: %d\n", metadataCount));

src/add-ons/kernel/file_systems/udf/Volume.cpp

269

TRACE_ERROR(("read_pos(pos:%" B_PRIdOFF ", len:%" B_PRIu32

src/add-ons/kernel/file_systems/udf/Volume.cpp

297

TRACE_ERROR(("Error creating vnode for root icb! "

src/add-ons/kernel/file_systems/udf/Volume.cpp

63

TRACE_ERROR(("Volume::Mount: failed to open device = %s\n", deviceName));

src/add-ons/kernel/file_systems/udf/Volume.cpp

98

TRACE_ERROR(("Volume::Mount: failed to recognize partition\n"));

src/add-ons/kernel/file_systems/udf/kernel_interface.cpp

200

TRACE_ERROR(("udf_get_vnode: InitCheck failed\n"));

src/add-ons/kernel/file_systems/udf/kernel_interface.cpp

408

TRACE_ERROR(("udf_open_dir: given Icb is not a directory (type: %d)\n",

src/add-ons/kernel/file_systems/udf/kernel_interface.cpp

416

TRACE_ERROR(("udf_open_dir: error getting directory iterator: 0x%"

src/add-ons/kernel/file_systems/udf/kernel_interface.cpp

462

TRACE_ERROR(("udf_read_dir: Icb does not match parent Icb of given "

src/apps/remotedesktop/RemoteView.cpp

100

TRACE_ERROR("no memory available\n");

src/apps/remotedesktop/RemoteView.cpp

106

TRACE_ERROR("failed to connect to %s:%" B_PRIu16 "\n",

src/apps/remotedesktop/RemoteView.cpp

114

TRACE_ERROR("no memory available\n");

src/apps/remotedesktop/RemoteView.cpp

121

TRACE_ERROR("no memory available\n");

src/apps/remotedesktop/RemoteView.cpp

130

TRACE_ERROR("no memory available\n");

src/apps/remotedesktop/RemoteView.cpp

138

TRACE_ERROR("no memory available\n");

src/apps/remotedesktop/RemoteView.cpp

1392

TRACE_ERROR("unknown protocol code: %u\n", code);

src/apps/remotedesktop/RemoteView.cpp

150

TRACE_ERROR("failed to start _DrawThread()\n");

src/apps/remotedesktop/RemoteView.cpp

151

TRACE_ERROR("status = %" B_PRIx32 "\n", fInitStatus);

src/apps/remotedesktop/RemoteView.cpp

372

TRACE_ERROR("state for token %" B_PRIu32 " already in list\n", token);

src/apps/remotedesktop/RemoteView.cpp

378

TRACE_ERROR("failed to allocate engine state\n");

src/apps/remotedesktop/RemoteView.cpp

386

TRACE_ERROR("failed to allocate offscreen view\n");

src/apps/remotedesktop/RemoteView.cpp

455

TRACE_ERROR("could not connect to device\n");

src/apps/remotedesktop/RemoteView.cpp

457

TRACE_ERROR("failed to read message from receiver\n");

src/apps/remotedesktop/RemoteView.cpp

610

TRACE_ERROR("didn't find state for token %" B_PRIu32 "\n", token);

src/apps/remotedesktop/RemoteView.cpp

613

TRACE_ERROR("failed to create state for unknown token\n");

src/apps/remotedesktop/RemoteView.cpp

77

TRACE_ERROR("no memory available\n");

src/apps/remotedesktop/RemoteView.cpp

88

TRACE_ERROR("no memory available\n");

src/kits/interface/layouter/LayoutOptimizer.cpp

286

TRACE_ERROR("solve(): matrix is not regular\n");

src/kits/interface/layouter/LayoutOptimizer.cpp

425

TRACE_ERROR("qr_decomposition(): 0 column %d\n", j);

src/kits/interface/layouter/LayoutOptimizer.cpp

752

TRACE_ERROR("Solve(): Error: No more active constraints!\n");

src/kits/interface/layouter/LayoutOptimizer.cpp

805

TRACE_ERROR("Solve(): Transposed A has less linear independent "

src/kits/interface/layouter/LayoutOptimizer.cpp

821

TRACE_ERROR("Solve(): Failed to compute lambda!\n");

src/kits/interface/layouter/LayoutOptimizer.cpp

913

TRACE_ERROR("Solve(): QR decomposition failed!\n");

src/kits/interface/layouter/LayoutOptimizer.cpp

939

TRACE_ERROR("Solve(): Failed to solve() system for p_Z\n");

src/libs/linprog/LayoutOptimizer.cpp

261

TRACE_ERROR("solve(): matrix is not regular\n");

src/libs/linprog/LayoutOptimizer.cpp

403

TRACE_ERROR("qr_decomposition(): 0 column %d\n", j);

src/libs/linprog/LayoutOptimizer.cpp

719

TRACE_ERROR("Solve(): Error: No more active constraints!\n");

src/libs/linprog/LayoutOptimizer.cpp

779

TRACE_ERROR("Solve(): Transposed A has less linear independent "

src/libs/linprog/LayoutOptimizer.cpp

795

TRACE_ERROR("Solve(): Failed to compute lambda!\n");

src/libs/linprog/LayoutOptimizer.cpp

885

TRACE_ERROR("Solve(): QR decomposition failed!\n");

src/libs/linprog/LayoutOptimizer.cpp

912

TRACE_ERROR("Solve(): Failed to solve() system for p_Z\n");

src/servers/app/drawing/interface/remote/NetReceiver.cpp

104

TRACE_ERROR("read failed, closing connection: %s\n",

src/servers/app/drawing/interface/remote/NetReceiver.cpp

114

TRACE_ERROR("failed to read, assuming disconnect\n");

src/servers/app/drawing/interface/remote/NetReceiver.cpp

124

TRACE_ERROR("writing to ring buffer failed: %s\n",

src/servers/app/drawing/interface/remote/NetReceiver.cpp

67

TRACE_ERROR("failed to listen on port: %s\n", strerror(result));

src/servers/app/drawing/interface/remote/NetSender.cpp

59

TRACE_ERROR("read failed, stopping sender thread: %s\n",

src/servers/app/drawing/interface/remote/NetSender.cpp

67

TRACE_ERROR("sending data failed: %s\n", strerror(sendSize));

src/servers/app/drawing/interface/remote/RemoteDrawingEngine.cpp

1050

TRACE_ERROR("failed to read draw string result: %s\n",

src/servers/app/drawing/interface/remote/RemoteDrawingEngine.cpp

1062

TRACE_ERROR("failed to read string width result: %s\n",

src/servers/app/drawing/interface/remote/RemoteDrawingEngine.cpp

1074

TRACE_ERROR("failed to read bitmap of read bitmap result: %s\n",

src/servers/app/drawing/interface/remote/RemoteHWInterface.cpp

239

TRACE_ERROR("failed to read message from receiver: %s\n",

src/servers/app/drawing/interface/remote/RemoteHWInterface.cpp

284

TRACE_ERROR("failed to read display mode\n");

src/servers/app/drawing/interface/remote/RemoteHWInterface.cpp

325

TRACE_ERROR("unhandled remote event code %u\n", code);

src/servers/app/drawing/interface/remote/RemoteMessage.cpp

48

TRACE_ERROR("failed to read from source: %s\n", strerror(readSize));

src/servers/app/drawing/interface/remote/RemoteMessage.cpp

58

TRACE_ERROR("failed to read message code: %s\n", strerror(result));

src/servers/app/drawing/interface/remote/RemoteMessage.cpp

65

TRACE_ERROR("failed to read message length: %s\n", strerror(result));

src/servers/app/drawing/interface/remote/RemoteMessage.cpp

70

TRACE_ERROR("message claims %" B_PRIu32 " bytes, needed at least %"

src/servers/app/drawing/interface/remote/StreamingRingBuffer.cpp

111

TRACE_ERROR("failed to acquire data lock\n");

src/servers/app/drawing/interface/remote/StreamingRingBuffer.cpp

176

TRACE_ERROR("failed to acquire data lock\n");

src/system/kernel/disk_device_manager/KDiskDeviceManager.cpp

1454

TRACE_ERROR("scanning failed: %s\n", strerror(error));

src/system/kernel/posix/xsi_message_queue.cpp

527

TRACE_ERROR(("xsi_msgctl: user_memcpy failed\n"));

src/system/kernel/posix/xsi_message_queue.cpp

542

TRACE_ERROR(("xsi_msgctl: user_memcpy failed\n"));

src/system/kernel/posix/xsi_message_queue.cpp

588

TRACE_ERROR(("xsi_semctl: command %d not valid\n", command));

src/system/kernel/posix/xsi_message_queue.cpp

629

TRACE_ERROR(("xsi_msgget: key %d already exist\n", (int)key));

src/system/kernel/posix/xsi_message_queue.cpp

649

TRACE_ERROR(("xsi_msgget: reached limit of maximun number of "

src/system/kernel/posix/xsi_message_queue.cpp

656

TRACE_ERROR(("xsi_msgget: failed to allocate new xsi "

src/system/kernel/posix/xsi_message_queue.cpp

694

TRACE_ERROR(("xsi_msgrcv: message size is out of range\n"));

src/system/kernel/posix/xsi_message_queue.cpp

750

TRACE_ERROR(("xsi_msgrcv: message too big!\n"));

src/system/kernel/posix/xsi_message_queue.cpp

792

TRACE_ERROR(("xsi_msgsnd: message size is out of range\n"));

src/system/kernel/posix/xsi_message_queue.cpp

809

TRACE_ERROR(("xsi_msgsnd: failed to create new message to queue\n"));

src/system/kernel/posix/xsi_semaphore.cpp

1012

TRACE_ERROR(("xsi_semctl: command %d not valid\n", command));

src/system/kernel/posix/xsi_semaphore.cpp

1047

TRACE_ERROR(("xsi_semop: failed to allocate sembuf struct\n"));

src/system/kernel/posix/xsi_semaphore.cpp

1053

TRACE_ERROR(("xsi_semop: user_memcpy failed\n"));

src/system/kernel/posix/xsi_semaphore.cpp

216

TRACE_ERROR(("XsiSemaphoreSet::XsiSemaphore(): failed to allocate "

src/system/kernel/posix/xsi_semaphore.cpp

354

TRACE_ERROR(("XsiSemaphoreSet::RecordUndo: newValue %d "

src/system/kernel/posix/xsi_semaphore.cpp

733

TRACE_ERROR(("xsi_semget: failed to create new Ipc object "

src/system/kernel/posix/xsi_semaphore.cpp

742

TRACE_ERROR(("xsi_semget: numberOfSemaphores out of range\n"));

src/system/kernel/posix/xsi_semaphore.cpp

748

TRACE_ERROR(("xsi_semget: reached limit of maximum number of "

src/system/kernel/posix/xsi_semaphore.cpp

756

TRACE_ERROR(("xsi_semget: failed to allocate a new xsi "

src/system/kernel/posix/xsi_semaphore.cpp

900

TRACE_ERROR(("xsi_semctl: user_memcpy failed\n"));

src/system/kernel/posix/xsi_semaphore.cpp

921

TRACE_ERROR(("xsi_semctl: user_memcpy failed\n"));

src/system/kernel/posix/xsi_semaphore.cpp

948

TRACE_ERROR(("xsi_semctl: user_memcpy failed\n"));

src/system/kernel/posix/xsi_semaphore.cpp

965

TRACE_ERROR(("xsi_semctl: user_memcpy failed\n"));