SHOW_INFO0
SHOW_INFO0( 2, "got:" );
SHOW_INFO0( 4, "got:" );
SHOW_INFO0(2, "Found Ext Laptop DVI");
SHOW_INFO0(2, "Found DVI");
SHOW_INFO0(2, "Laptop Panel Found");
SHOW_INFO0(2, "Searching port 0");
SHOW_INFO0(2, "Found Laptop Panel");
SHOW_INFO0(2, "Found Ext Laptop DVI");
SHOW_INFO0(2, "Found CRT connected to TV-DAC, i.e. DVI port");
SHOW_INFO0(2, "S-Video TV-Out is connected");
SHOW_INFO0(2, "Composite TV-Out is connected");
SHOW_INFO0(2, "S-Video TV-Out is connected");
SHOW_INFO0(2, "Composite TV-Out is connected");
SHOW_INFO0(4, "");
SHOW_INFO0(3, "we can start now");
SHOW_INFO0(3, "error setting up DMA buffer");
SHOW_INFO0(4, "AGP 2.0 1x mode is available");
SHOW_INFO0(4, "AGP 2.0 2x mode is available");
SHOW_INFO0(41, "AGP 2.0 4x mode is available");
SHOW_INFO0(4, "AGP 3.0 4x mode is available");
SHOW_INFO0(4, "AGP 3.0 8x mode is available");
SHOW_INFO0(4, "Fast write transfers are supported");
SHOW_INFO0(4, "Sideband adressing is supported");
SHOW_INFO0(4, "listing settings now in use:");
SHOW_INFO0(2,"AGP 2.0 1x mode is set");
SHOW_INFO0(2,"AGP 2.0 2x mode is set");
SHOW_INFO0(2,"AGP 2.0 4x mode is set");
SHOW_INFO0(2,"AGP 3.0 4x mode is set");
SHOW_INFO0(2,"AGP 3.0 8x mode is set");
SHOW_INFO0(2, "Fast write transfers are enabled");
SHOW_INFO0(2, "Fast write transfers are disabled");
SHOW_INFO0(4, "Sideband adressing is enabled");
SHOW_INFO0(2, "The AGP interface is enabled.");
SHOW_INFO0(2, "The AGP interface is disabled.");
SHOW_INFO0(1, "Busmanager not installed.\nWarning Card May hang if AGP Fastwrites are Enabled." );
SHOW_INFO0(1, "Found AGP capable device" );
SHOW_INFO0(1, "End of AGP capable devices list.");
SHOW_INFO0(1, "No AGP capable devices found.");
SHOW_INFO0(1, "Disabling AGP mode...");
SHOW_INFO0(1, "Activating AGP mode...");
SHOW_INFO0( 2, "no ROM found" );
SHOW_INFO0( 4 , "No Device Info Table found!");
SHOW_INFO0(4, "No Connector Info Table found!");
SHOW_INFO0( 4 , "lvds port is not in connector table, added in.");
SHOW_INFO0( 4, "lcd ddc info table found!");
SHOW_INFO0( 4, "no connector found in connector info table.");
SHOW_INFO0( 0, "Generation 2 PCI interface, using max accessible memory");
SHOW_INFO0( 0, "Generation 1 PCI interface in multifunction mode"
SHOW_INFO0(0, "no supported devices found");
SHOW_INFO0( 1, "Switch Head = True" );
SHOW_INFO0( 1, "Force LCD ON" );
SHOW_INFO0( 1, "Mobility Power Saving Disabled (Dynamic Clocks)" );
SHOW_INFO0( 1, "Force PCI = True" );
SHOW_INFO0( 1, "use Fastwrites ON" );
SHOW_INFO0( 1, "DMA ACC Enabled" );
SHOW_INFO0( 1, "DMA ACC Disabled" );
SHOW_INFO0( 1, "DMA WriteBack Disabled" );
SHOW_INFO0(0, RADEON_DRIVER_VERSION);
SHOW_INFO0( 2, "Copy of Laptop Display Regs for Reference:");
SHOW_INFO0( 0, "DMA is diabled using PIO mode");
SHOW_INFO0( 3, "We like to fake IRQ" );
SHOW_INFO0( 3, "Graphics card address mapping:" );
SHOW_INFO0(2, "busy because playing audio");
SHOW_INFO0(2, "LUN needs init");
SHOW_INFO0(2, "LUN is formatting");
SHOW_INFO0(2, "Removal requested");
SHOW_INFO0(2, "Becoming ready");
SHOW_INFO0(2, "Unit was reset");
SHOW_INFO0( 2, "Sending start to init LUN" );