emuxki_codec_read

193

data = emuxki_codec_read(config, AC97_RESET);

219

data1 = emuxki_codec_read(config, AC97_VENDOR_ID1);

220

data2 = emuxki_codec_read(config, AC97_VENDOR_ID2);

256

LOG(("powerdown register was = %#04x\n",emuxki_codec_read(config, AC97_POWERDOWN)));

262

emuxki_codec_write(config, AC97_POWERDOWN, emuxki_codec_read(config, AC97_POWERDOWN) & ~0x8000); /* switch on (low active) */

264

emuxki_codec_write(config, AC97_POWERDOWN, emuxki_codec_read(config, AC97_POWERDOWN) | 0x8000); /* switch off */

265

LOG(("powerdown register is = %#04x\n", emuxki_codec_read(config, AC97_POWERDOWN)));

2251

PRINT(("codec master output = %#04x\n",emuxki_codec_read(&card->config, AC97_MASTER_VOLUME)));

2252

PRINT(("codec aux output = %#04x\n",emuxki_codec_read(&card->config, AC97_AUX_OUT_VOLUME)));

2253

PRINT(("codec mono output = %#04x\n",emuxki_codec_read(&card->config, AC97_MONO_VOLUME)));

2254

PRINT(("codec pcm output = %#04x\n",emuxki_codec_read(&card->config, AC97_PCM_OUT_VOLUME)));

2255

PRINT(("codec line in = %#04x\n",emuxki_codec_read(&card->config, AC97_LINE_IN_VOLUME)));

2256

PRINT(("codec record line in= %#04x\n",emuxki_codec_read(&card->config, AC97_RECORD_SELECT)));

2257

PRINT(("codec record gain = %#04x\n",emuxki_codec_read(&card->config, AC97_RECORD_GAIN)));

2259

if (emuxki_codec_read(&card->config, AC97_EXTENDED_AUDIO_ID) & 0x0080) {

55

uint16 emuxki_codec_read(device_config *config, int regno);