Symbol: ELINK_DEBUG_P0
sys/dev/bxe/bxe.c
11808
ELINK_DEBUG_P0(sc, "link set to full duplex\n");
sys/dev/bxe/bxe.c
11811
ELINK_DEBUG_P0(sc, "link set to half duplex\n");
sys/dev/bxe/bxe.c
18393
ELINK_DEBUG_P0(sc, "bxe_reset_port called\n");
sys/dev/bxe/bxe_elink.c
10001
ELINK_DEBUG_P0(sc, "Setting 1G force\n");
sys/dev/bxe/bxe_elink.c
10017
ELINK_DEBUG_P0(sc, "Setting 1G clause37\n");
sys/dev/bxe/bxe_elink.c
10150
ELINK_DEBUG_P0(sc, "Setting 1G force\n");
sys/dev/bxe/bxe_elink.c
10177
ELINK_DEBUG_P0(sc, "Setting 1G clause37\n");
sys/dev/bxe/bxe_elink.c
10210
ELINK_DEBUG_P0(sc, "Initializing BCM8727\n");
sys/dev/bxe/bxe_elink.c
10267
ELINK_DEBUG_P0(sc, "Enabling TXONOFF_PWRDN_DIS\n");
sys/dev/bxe/bxe_elink.c
10300
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
10326
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
10359
ELINK_DEBUG_P0(sc, "SFP+ module is not initialized\n");
sys/dev/bxe/bxe_elink.c
10461
ELINK_DEBUG_P0(sc, "Enabling 8727 TX laser\n");
sys/dev/bxe/bxe_elink.c
10464
ELINK_DEBUG_P0(sc, "Tx is disabled\n");
sys/dev/bxe/bxe_elink.c
10586
ELINK_DEBUG_P0(sc, "Unable to read 848xx "
sys/dev/bxe/bxe_elink.c
10605
ELINK_DEBUG_P0(sc, "Unable to read 848xx phy fw "
sys/dev/bxe/bxe_elink.c
10720
ELINK_DEBUG_P0(sc, "Advertising 1G\n");
sys/dev/bxe/bxe_elink.c
10736
ELINK_DEBUG_P0(sc, "Advertising 100M-FD\n");
sys/dev/bxe/bxe_elink.c
10745
ELINK_DEBUG_P0(sc, "Advertising 100M-HD\n");
sys/dev/bxe/bxe_elink.c
10753
ELINK_DEBUG_P0(sc, "Advertising 10M-FD\n");
sys/dev/bxe/bxe_elink.c
10761
ELINK_DEBUG_P0(sc, "Advertising 10M-HD\n");
sys/dev/bxe/bxe_elink.c
10777
ELINK_DEBUG_P0(sc, "Setting 100M force\n");
sys/dev/bxe/bxe_elink.c
10787
ELINK_DEBUG_P0(sc, "Setting 10M force\n");
sys/dev/bxe/bxe_elink.c
10810
ELINK_DEBUG_P0(sc, "Advertising 10G\n");
sys/dev/bxe/bxe_elink.c
10875
ELINK_DEBUG_P0(sc, "FW cmd: FW not ready.\n");
sys/dev/bxe/bxe_elink.c
10910
ELINK_DEBUG_P0(sc, "FW cmd failed.\n");
sys/dev/bxe/bxe_elink.c
10951
ELINK_DEBUG_P0(sc, "FW cmd: FW not ready.\n");
sys/dev/bxe/bxe_elink.c
10986
ELINK_DEBUG_P0(sc, "FW cmd failed.\n");
sys/dev/bxe/bxe_elink.c
11135
ELINK_DEBUG_P0(sc, "Don't Advertise 10GBase-T EEE\n");
sys/dev/bxe/bxe_elink.c
11141
ELINK_DEBUG_P0(sc, "EEE disable failed.\n");
sys/dev/bxe/bxe_elink.c
11159
ELINK_DEBUG_P0(sc, "EEE enable failed.\n");
sys/dev/bxe/bxe_elink.c
11280
ELINK_DEBUG_P0(sc, "Cfg AutogrEEEn failed.\n");
sys/dev/bxe/bxe_elink.c
11312
ELINK_DEBUG_P0(sc, "Failed to configure EEE timers\n");
sys/dev/bxe/bxe_elink.c
11325
ELINK_DEBUG_P0(sc, "Failed to set EEE advertisement\n");
sys/dev/bxe/bxe_elink.c
11727
ELINK_DEBUG_P0(sc, "Setting LINK_SIGNAL\n");
sys/dev/bxe/bxe_elink.c
1176
ELINK_DEBUG_P0(sc, "ETS E2E3 disabled configuration\n");
sys/dev/bxe/bxe_elink.c
11850
ELINK_DEBUG_P0(sc, "54618SE cfg init\n");
sys/dev/bxe/bxe_elink.c
11930
ELINK_DEBUG_P0(sc, "Advertising 1G\n");
sys/dev/bxe/bxe_elink.c
11947
ELINK_DEBUG_P0(sc, "Advertising 10M-HD\n");
sys/dev/bxe/bxe_elink.c
11953
ELINK_DEBUG_P0(sc, "Advertising 10M-FD\n");
sys/dev/bxe/bxe_elink.c
11959
ELINK_DEBUG_P0(sc, "Advertising 100M-HD\n");
sys/dev/bxe/bxe_elink.c
11965
ELINK_DEBUG_P0(sc, "Advertising 100M-FD\n");
sys/dev/bxe/bxe_elink.c
11976
ELINK_DEBUG_P0(sc, "Setting 100M force\n");
sys/dev/bxe/bxe_elink.c
11983
ELINK_DEBUG_P0(sc, "Setting 10M force\n");
sys/dev/bxe/bxe_elink.c
11998
ELINK_DEBUG_P0(sc, "Failed to configure EEE timers\n");
sys/dev/bxe/bxe_elink.c
12012
ELINK_DEBUG_P0(sc, "Don't Advertise 1GBase-T EEE\n");
sys/dev/bxe/bxe_elink.c
12024
ELINK_DEBUG_P0(sc, "Enabling Auto-GrEEEn\n");
sys/dev/bxe/bxe_elink.c
12027
ELINK_DEBUG_P0(sc, "Don't Adv. EEE\n");
sys/dev/bxe/bxe_elink.c
12223
ELINK_DEBUG_P0(sc, "2PMA/PMD ext_phy_loopback: 54618se\n");
sys/dev/bxe/bxe_elink.c
12274
ELINK_DEBUG_P0(sc, "Setting the SFX7101 LASI indication\n");
sys/dev/bxe/bxe_elink.c
12285
ELINK_DEBUG_P0(sc, "Setting the SFX7101 LED to blink on traffic\n");
sys/dev/bxe/bxe_elink.c
13137
ELINK_DEBUG_P0(sc, "Invalid switch_cfg\n");
sys/dev/bxe/bxe_elink.c
13414
ELINK_DEBUG_P0(sc, "Begin phy probe\n");
sys/dev/bxe/bxe_elink.c
13838
ELINK_DEBUG_P0(sc, "Calling PHY specific func\n");
sys/dev/bxe/bxe_elink.c
13958
ELINK_DEBUG_P0(sc, "Phy Initialization started\n");
sys/dev/bxe/bxe_elink.c
13993
ELINK_DEBUG_P0(sc, "Link Flap Avoidance in progress\n");
sys/dev/bxe/bxe_elink.c
14019
ELINK_DEBUG_P0(sc, "No phy found for initialization !!\n");
sys/dev/bxe/bxe_elink.c
14263
ELINK_DEBUG_P0(sc, "populate_phy failed\n");
sys/dev/bxe/bxe_elink.c
14388
ELINK_DEBUG_P0(sc, "populate phy failed\n");
sys/dev/bxe/bxe_elink.c
14504
ELINK_DEBUG_P0(sc, "populate phy failed\n");
sys/dev/bxe/bxe_elink.c
14635
ELINK_DEBUG_P0(sc, "Begin common phy init\n");
sys/dev/bxe/bxe_elink.c
14716
ELINK_DEBUG_P0(sc, "Analyze Remote Fault\n");
sys/dev/bxe/bxe_elink.c
14719
ELINK_DEBUG_P0(sc, "Analyze TX Fault\n");
sys/dev/bxe/bxe_elink.c
14722
ELINK_DEBUG_P0(sc, "Analyze UNKNOWN\n");
sys/dev/bxe/bxe_elink.c
1481
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
14884
ELINK_DEBUG_P0(sc, "KR2 recovery\n");
sys/dev/bxe/bxe_elink.c
14911
ELINK_DEBUG_P0(sc, "No sigdet\n");
sys/dev/bxe/bxe_elink.c
14929
ELINK_DEBUG_P0(sc, "No BP\n");
sys/dev/bxe/bxe_elink.c
14971
ELINK_DEBUG_P0(sc, "Fault detection failed\n");
sys/dev/bxe/bxe_elink.c
15019
ELINK_DEBUG_P0(sc, "populate phy failed\n");
sys/dev/bxe/bxe_elink.c
15071
ELINK_DEBUG_P0(sc, "populate phy failed\n");
sys/dev/bxe/bxe_elink.c
1509
ELINK_DEBUG_P0(sc, "elink_ets_disabled - chip not supported\n");
sys/dev/bxe/bxe_elink.c
1642
ELINK_DEBUG_P0(sc, "elink_ets_E3B0_config BW"
sys/dev/bxe/bxe_elink.c
1658
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1662
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1698
ELINK_DEBUG_P0(sc, "elink_ets_e3b0_sp_pri_to_cos_set invalid "
sys/dev/bxe/bxe_elink.c
1704
ELINK_DEBUG_P0(sc, "elink_ets_e3b0_sp_pri_to_cos_set invalid "
sys/dev/bxe/bxe_elink.c
1790
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1804
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1833
ELINK_DEBUG_P0(sc, "elink_ets_e3b0_sp_set_pri_cli_reg not all "
sys/dev/bxe/bxe_elink.c
1881
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1887
ELINK_DEBUG_P0(sc, "elink_ets_E3B0_config the number of COS "
sys/dev/bxe/bxe_elink.c
1899
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1933
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1938
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1949
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
1960
ELINK_DEBUG_P0(sc, "elink_ets_E3B0_config SP failed\n");
sys/dev/bxe/bxe_elink.c
1969
ELINK_DEBUG_P0(sc, "ETS enabled BW limit configuration\n");
sys/dev/bxe/bxe_elink.c
2018
ELINK_DEBUG_P0(sc, "ETS enabled BW limit configuration\n");
sys/dev/bxe/bxe_elink.c
2023
ELINK_DEBUG_P0(sc, "Total BW can't be zero\n");
sys/dev/bxe/bxe_elink.c
2047
ELINK_DEBUG_P0(sc, "ETS enabled strict configuration\n");
sys/dev/bxe/bxe_elink.c
2155
ELINK_DEBUG_P0(sc, "pfc statistic read from EMAC\n");
sys/dev/bxe/bxe_elink.c
2184
ELINK_DEBUG_P0(sc, "pfc statistic\n");
sys/dev/bxe/bxe_elink.c
2190
ELINK_DEBUG_P0(sc, "About to read PFC stats from EMAC\n");
sys/dev/bxe/bxe_elink.c
2279
ELINK_DEBUG_P0(sc, "EMAC timeout!\n");
sys/dev/bxe/bxe_elink.c
2345
ELINK_DEBUG_P0(sc, "enabling UMAC\n");
sys/dev/bxe/bxe_elink.c
2386
ELINK_DEBUG_P0(sc, "configured UMAC for EEE\n");
sys/dev/bxe/bxe_elink.c
2447
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
2460
ELINK_DEBUG_P0(sc, "Init XMAC to 2 ports x 10G per path\n");
sys/dev/bxe/bxe_elink.c
2471
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
2476
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
2525
ELINK_DEBUG_P0(sc, "enabling XMAC\n");
sys/dev/bxe/bxe_elink.c
2562
ELINK_DEBUG_P0(sc, "Setting XMAC for EEE\n");
sys/dev/bxe/bxe_elink.c
2598
ELINK_DEBUG_P0(sc, "enabling EMAC\n");
sys/dev/bxe/bxe_elink.c
2620
ELINK_DEBUG_P0(sc, "elink_emac_enable: Setting FPGA\n");
sys/dev/bxe/bxe_elink.c
2632
ELINK_DEBUG_P0(sc, "XGXS\n");
sys/dev/bxe/bxe_elink.c
2639
ELINK_DEBUG_P0(sc, "SerDes\n");
sys/dev/bxe/bxe_elink.c
2695
ELINK_DEBUG_P0(sc, "PFC is enabled\n");
sys/dev/bxe/bxe_elink.c
2825
ELINK_DEBUG_P0(sc, "PFC is enabled\n");
sys/dev/bxe/bxe_elink.c
2839
ELINK_DEBUG_P0(sc, "PFC is disabled\n");
sys/dev/bxe/bxe_elink.c
2865
ELINK_DEBUG_P0(sc, "enable bmac loopback\n");
sys/dev/bxe/bxe_elink.c
2945
ELINK_DEBUG_P0(sc, "updating pfc nig parameters\n");
sys/dev/bxe/bxe_elink.c
3054
ELINK_DEBUG_P0(sc, "About to update PFC in BMAC\n");
sys/dev/bxe/bxe_elink.c
3064
ELINK_DEBUG_P0(sc, "About to update PFC in EMAC\n");
sys/dev/bxe/bxe_elink.c
3094
ELINK_DEBUG_P0(sc, "Enabling BigMAC1\n");
sys/dev/bxe/bxe_elink.c
3115
ELINK_DEBUG_P0(sc, "enable bmac loopback\n");
sys/dev/bxe/bxe_elink.c
3166
ELINK_DEBUG_P0(sc, "Enabling BigMAC2\n");
sys/dev/bxe/bxe_elink.c
3440
ELINK_DEBUG_P0(sc, "write phy register failed\n");
sys/dev/bxe/bxe_elink.c
3477
ELINK_DEBUG_P0(sc, "read phy register failed\n");
sys/dev/bxe/bxe_elink.c
3521
ELINK_DEBUG_P0(sc, "read phy register failed\n");
sys/dev/bxe/bxe_elink.c
3544
ELINK_DEBUG_P0(sc, "read phy register failed\n");
sys/dev/bxe/bxe_elink.c
3599
ELINK_DEBUG_P0(sc, "write phy register failed\n");
sys/dev/bxe/bxe_elink.c
3621
ELINK_DEBUG_P0(sc, "write phy register failed\n");
sys/dev/bxe/bxe_elink.c
3741
ELINK_DEBUG_P0(sc, "Error: Tx LPI is enabled with timer 0\n");
sys/dev/bxe/bxe_elink.c
3806
ELINK_DEBUG_P0(sc, "Advertise 10GBase-T EEE\n");
sys/dev/bxe/bxe_elink.c
3810
ELINK_DEBUG_P0(sc, "Advertise 1GBase-T EEE\n");
sys/dev/bxe/bxe_elink.c
3849
ELINK_DEBUG_P0(sc, "EEE negotiated - 100M\n");
sys/dev/bxe/bxe_elink.c
3857
ELINK_DEBUG_P0(sc, "EEE negotiated - 1G\n");
sys/dev/bxe/bxe_elink.c
3865
ELINK_DEBUG_P0(sc, "EEE negotiated - 10G\n");
sys/dev/bxe/bxe_elink.c
3873
ELINK_DEBUG_P0(sc, "EEE is active\n");
sys/dev/bxe/bxe_elink.c
3902
ELINK_DEBUG_P0(sc, "Setting BSC switch\n");
sys/dev/bxe/bxe_elink.c
4153
ELINK_DEBUG_P0(sc, "elink_serdes_deassert\n");
sys/dev/bxe/bxe_elink.c
4188
ELINK_DEBUG_P0(sc, "elink_xgxs_deassert\n");
sys/dev/bxe/bxe_elink.c
4319
ELINK_DEBUG_P0(sc, "Flow Control: TX only\n");
sys/dev/bxe/bxe_elink.c
4324
ELINK_DEBUG_P0(sc, "Flow Control: RX only\n");
sys/dev/bxe/bxe_elink.c
4338
ELINK_DEBUG_P0(sc, "Flow Control: RX & TX\n");
sys/dev/bxe/bxe_elink.c
4341
ELINK_DEBUG_P0(sc, "Flow Control: RX only\n");
sys/dev/bxe/bxe_elink.c
4346
ELINK_DEBUG_P0(sc, "Flow Control: None\n");
sys/dev/bxe/bxe_elink.c
4486
ELINK_DEBUG_P0(sc, "Enabling 20G-KR2\n");
sys/dev/bxe/bxe_elink.c
4524
ELINK_DEBUG_P0(sc, "Disabling 20G-KR2\n");
sys/dev/bxe/bxe_elink.c
4540
ELINK_DEBUG_P0(sc, "Configure WC for LPI pass through\n");
sys/dev/bxe/bxe_elink.c
4578
ELINK_DEBUG_P0(sc, "Enable Auto Negotiation for KR\n");
sys/dev/bxe/bxe_elink.c
4600
ELINK_DEBUG_P0(sc, "Advertize 1G\n");
sys/dev/bxe/bxe_elink.c
4614
ELINK_DEBUG_P0(sc, "Advertize 10G\n");
sys/dev/bxe/bxe_elink.c
4652
ELINK_DEBUG_P0(sc, "Enable CL37 BAM on KR\n");
sys/dev/bxe/bxe_elink.c
5043
ELINK_DEBUG_P0(sc, "set SGMII AUTONEG\n");
sys/dev/bxe/bxe_elink.c
5295
ELINK_DEBUG_P0(sc, "Setting 10G SFI\n");
sys/dev/bxe/bxe_elink.c
5298
ELINK_DEBUG_P0(sc, "Setting 1G Fiber\n");
sys/dev/bxe/bxe_elink.c
5347
ELINK_DEBUG_P0(sc, "Setting SGMII mode\n");
sys/dev/bxe/bxe_elink.c
5357
ELINK_DEBUG_P0(sc, "Setting KR 10G-Force\n");
sys/dev/bxe/bxe_elink.c
5365
ELINK_DEBUG_P0(sc, "Setting 10G XFI\n");
sys/dev/bxe/bxe_elink.c
5369
ELINK_DEBUG_P0(sc, "1G Fiber\n");
sys/dev/bxe/bxe_elink.c
5372
ELINK_DEBUG_P0(sc, "10/100/1G SGMII\n");
sys/dev/bxe/bxe_elink.c
5402
ELINK_DEBUG_P0(sc, "Speed not supported yet\n");
sys/dev/bxe/bxe_elink.c
5405
ELINK_DEBUG_P0(sc, "Setting 20G DXGXS\n");
sys/dev/bxe/bxe_elink.c
5415
ELINK_DEBUG_P0(sc, "Setting KR 20G-Force\n");
sys/dev/bxe/bxe_elink.c
5429
ELINK_DEBUG_P0(sc, "Exit config init\n");
sys/dev/bxe/bxe_elink.c
5541
ELINK_DEBUG_P0(sc, "phy link up\n");
sys/dev/bxe/bxe_elink.c
5622
ELINK_DEBUG_P0(sc, "phy link down\n");
sys/dev/bxe/bxe_elink.c
5766
ELINK_DEBUG_P0(sc, "BUG! XGXS is still in reset!\n");
sys/dev/bxe/bxe_elink.c
5836
ELINK_DEBUG_P0(sc, "XGXS\n");
sys/dev/bxe/bxe_elink.c
6067
ELINK_DEBUG_P0(sc, "elink_restart_autoneg\n");
sys/dev/bxe/bxe_elink.c
6286
ELINK_DEBUG_P0(sc, "elink_check_fallback_to_cl37\n");
sys/dev/bxe/bxe_elink.c
6346
ELINK_DEBUG_P0(sc, "Disabling CL73, and restarting CL37 autoneg\n");
sys/dev/bxe/bxe_elink.c
6373
ELINK_DEBUG_P0(sc, "phy link up\n");
sys/dev/bxe/bxe_elink.c
6440
ELINK_DEBUG_P0(sc, "phy link down\n");
sys/dev/bxe/bxe_elink.c
6721
ELINK_DEBUG_P0(sc, "setting link speed & duplex\n");
sys/dev/bxe/bxe_elink.c
6802
ELINK_DEBUG_P0(sc, "not SGMII, no AN\n");
sys/dev/bxe/bxe_elink.c
6811
ELINK_DEBUG_P0(sc, "not SGMII, AN\n");
sys/dev/bxe/bxe_elink.c
6828
ELINK_DEBUG_P0(sc, "SGMII\n");
sys/dev/bxe/bxe_elink.c
6914
ELINK_DEBUG_P0(sc, "enabled XGXS interrupt\n");
sys/dev/bxe/bxe_elink.c
6919
ELINK_DEBUG_P0(sc, "enabled external phy int\n");
sys/dev/bxe/bxe_elink.c
6924
ELINK_DEBUG_P0(sc, "enabled SerDes interrupt\n");
sys/dev/bxe/bxe_elink.c
6929
ELINK_DEBUG_P0(sc, "enabled external phy int\n");
sys/dev/bxe/bxe_elink.c
7117
ELINK_DEBUG_P0(sc, "XGXS 10G loopback enable\n");
sys/dev/bxe/bxe_elink.c
7150
ELINK_DEBUG_P0(sc, "XGXS 1G loopback enable\n");
sys/dev/bxe/bxe_elink.c
7464
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
7507
ELINK_DEBUG_P0(sc, "reset external PHY\n");
sys/dev/bxe/bxe_elink.c
7580
ELINK_DEBUG_P0(sc, "Found errors on XMAC\n");
sys/dev/bxe/bxe_elink.c
7592
ELINK_DEBUG_P0(sc, "Enabling LPI assertion\n");
sys/dev/bxe/bxe_elink.c
7605
ELINK_DEBUG_P0(sc, "Found errors on BMAC\n");
sys/dev/bxe/bxe_elink.c
7814
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
7875
ELINK_DEBUG_P0(sc, "phy_link_up set to 0\n");
sys/dev/bxe/bxe_elink.c
7925
ELINK_DEBUG_P0(sc, "local phy and external phy are up\n");
sys/dev/bxe/bxe_elink.c
7927
ELINK_DEBUG_P0(sc, "either local phy or external phy or both are down\n");
sys/dev/bxe/bxe_elink.c
8175
ELINK_DEBUG_P0(sc, "XAUI work-around not required\n");
sys/dev/bxe/bxe_elink.c
8178
ELINK_DEBUG_P0(sc, "bit 15 went off\n");
sys/dev/bxe/bxe_elink.c
8189
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
8199
ELINK_DEBUG_P0(sc, "Warning: XAUI work-around timeout !!!\n");
sys/dev/bxe/bxe_elink.c
8274
ELINK_DEBUG_P0(sc, "Init 8073\n");
sys/dev/bxe/bxe_elink.c
8301
ELINK_DEBUG_P0(sc, "Swapping polarity for the 8073\n");
sys/dev/bxe/bxe_elink.c
8325
ELINK_DEBUG_P0(sc, "Enable CL37 BAM on KR\n");
sys/dev/bxe/bxe_elink.c
8329
ELINK_DEBUG_P0(sc, "Forced speed 10G on 807X\n");
sys/dev/bxe/bxe_elink.c
8370
ELINK_DEBUG_P0(sc, "Add 2.5G\n");
sys/dev/bxe/bxe_elink.c
8376
ELINK_DEBUG_P0(sc, "Disable 2.5G\n");
sys/dev/bxe/bxe_elink.c
8529
ELINK_DEBUG_P0(sc, "Swapping 1G polarity for"
sys/dev/bxe/bxe_elink.c
8584
ELINK_DEBUG_P0(sc, "init 8705\n");
sys/dev/bxe/bxe_elink.c
8613
ELINK_DEBUG_P0(sc, "read status 8705\n");
sys/dev/bxe/bxe_elink.c
8653
ELINK_DEBUG_P0(sc, "Disabling PMD transmitter\n");
sys/dev/bxe/bxe_elink.c
8655
ELINK_DEBUG_P0(sc, "NOT disabling PMD transmitter\n");
sys/dev/bxe/bxe_elink.c
8659
ELINK_DEBUG_P0(sc, "Enabling PMD transmitter\n");
sys/dev/bxe/bxe_elink.c
8757
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
8849
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
8888
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
9031
ELINK_DEBUG_P0(sc, "Failed to read from SFP+ module EEPROM\n");
sys/dev/bxe/bxe_elink.c
9049
ELINK_DEBUG_P0(sc, "Active Copper cable detected\n");
sys/dev/bxe/bxe_elink.c
9062
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
9065
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
9083
ELINK_DEBUG_P0(sc, "1G SFP module detected\n");
sys/dev/bxe/bxe_elink.c
9109
ELINK_DEBUG_P0(sc, "10G Optic module detected\n");
sys/dev/bxe/bxe_elink.c
9149
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
9178
ELINK_DEBUG_P0(sc, "NOT enforcing module verification\n");
sys/dev/bxe/bxe_elink.c
9190
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
9197
ELINK_DEBUG_P0(sc,
sys/dev/bxe/bxe_elink.c
9205
ELINK_DEBUG_P0(sc, "Approved module\n");
sys/dev/bxe/bxe_elink.c
9318
ELINK_DEBUG_P0(sc, "Setting LIMITING MODE\n");
sys/dev/bxe/bxe_elink.c
9325
ELINK_DEBUG_P0(sc, "Setting LRM MODE\n");
sys/dev/bxe/bxe_elink.c
9603
ELINK_DEBUG_P0(sc, "Failed to get valid module type\n");
sys/dev/bxe/bxe_elink.c
9607
ELINK_DEBUG_P0(sc, "Module verification failed!!\n");
sys/dev/bxe/bxe_elink.c
9616
ELINK_DEBUG_P0(sc, "Shutdown SFP+ module!!\n");
sys/dev/bxe/bxe_elink.c
9657
ELINK_DEBUG_P0(sc, "Failed to get MOD_ABS interrupt config\n");
sys/dev/bxe/bxe_elink.c
9697
ELINK_DEBUG_P0(sc, "SFP+ module is not initialized\n");
sys/dev/bxe/bxe_elink.c
9743
ELINK_DEBUG_P0(sc, "XGXS 8706/8726\n");
sys/dev/bxe/bxe_elink.c
9842
ELINK_DEBUG_P0(sc, "XGXS 8706 force 10Gbps\n");
sys/dev/bxe/bxe_elink.c
9857
ELINK_DEBUG_P0(sc, "XGXS 8706 AutoNeg\n");
sys/dev/bxe/bxe_elink.c
9893
ELINK_DEBUG_P0(sc, "Enabling TXONOFF_PWRDN_DIS\n");
sys/dev/bxe/bxe_elink.c
9918
ELINK_DEBUG_P0(sc, "PMA/PMD ext_phy_loopback: 8726\n");
sys/dev/bxe/bxe_elink.c
992
ELINK_DEBUG_P0(sc, "No LFA due to DCC flap after clp exit\n");
sys/dev/bxe/bxe_elink.c
9972
ELINK_DEBUG_P0(sc, "Tx is disabled\n");
sys/dev/bxe/bxe_elink.c
9986
ELINK_DEBUG_P0(sc, "Initializing BCM8726\n");