Symbol: ECORE_MSG
sys/dev/bxe/ecore_init.h
783
ECORE_MSG(sc, "Setting parity mask "
sys/dev/bxe/ecore_init.h
818
ECORE_MSG(sc,
sys/dev/bxe/ecore_init.h
828
ECORE_MSG(sc, "Parity error in MCP: 0x%x\n",
sys/dev/bxe/ecore_init_ops.h
510
ECORE_MSG(sc, "read order of %d order adjusted to %d\n",
sys/dev/bxe/ecore_init_ops.h
515
ECORE_MSG(sc, "write order of %d order adjusted to %d\n",
sys/dev/bxe/ecore_init_ops.h
520
ECORE_MSG(sc, "write order adjusted to 1 for FPGA\n");
sys/dev/bxe/ecore_init_ops.h
523
ECORE_MSG(sc, "read order %d write order %d\n", r_order, w_order);
sys/dev/bxe/ecore_sp.c
1022
ECORE_MSG(sc, "About to %s MAC %02x:%02x:%02x:%02x:%02x:%02x for Queue %d\n",
sys/dev/bxe/ecore_sp.c
1124
ECORE_MSG(sc, "%s MAC %02x:%02x:%02x:%02x:%02x:%02x CLID %d CAM offset %d\n",
sys/dev/bxe/ecore_sp.c
1183
ECORE_MSG(sc, "About to %s VLAN %d\n", (add ? "add" : "delete"),
sys/dev/bxe/ecore_sp.c
131
ECORE_MSG(sc, "Preamble failed: %d\n", rc);
sys/dev/bxe/ecore_sp.c
1525
ECORE_MSG(sc, "ADD command is not allowed considering current registry state.\n");
sys/dev/bxe/ecore_sp.c
1533
ECORE_MSG(sc, "There is a pending ADD command already\n");
sys/dev/bxe/ecore_sp.c
1576
ECORE_MSG(sc, "DEL command is not allowed considering current registry state\n");
sys/dev/bxe/ecore_sp.c
1594
ECORE_MSG(sc, "There is a pending DEL command already\n");
sys/dev/bxe/ecore_sp.c
1636
ECORE_MSG(sc, "MOVE command is not allowed considering current registry state\n");
sys/dev/bxe/ecore_sp.c
1655
ECORE_MSG(sc, "There is a pending MOVE command already\n");
sys/dev/bxe/ecore_sp.c
1766
ECORE_MSG(sc, "vlan_mac_execute_step - trying to take writer lock\n");
sys/dev/bxe/ecore_sp.c
1878
ECORE_MSG(sc, "Optimizing %s command\n",
sys/dev/bxe/ecore_sp.c
1928
ECORE_MSG(sc, "Got cam offset %d\n", reg_elem->cam_offset);
sys/dev/bxe/ecore_sp.c
193
ECORE_MSG(sc, "RAMROD_DRV_CLR_ONLY requested: resetting a pending_comp list\n");
sys/dev/bxe/ecore_sp.c
2141
ECORE_MSG(sc, "RAMROD_DRV_CLR_ONLY requested: clearing a pending bit.\n");
sys/dev/bxe/ecore_sp.c
2248
ECORE_MSG(sc, "vlan_mac_del_all -- taking vlan_mac_lock (reader)\n");
sys/dev/bxe/ecore_sp.c
2269
ECORE_MSG(sc, "vlan_mac_del_all -- releasing vlan_mac_lock (reader)\n");
sys/dev/bxe/ecore_sp.c
256
ECORE_MSG(sc, "Allocating a new exe_queue element\n");
sys/dev/bxe/ecore_sp.c
2603
ECORE_MSG(sc, "drop_ucast 0x%x\ndrop_mcast 0x%x\n accp_ucast 0x%x\n"
sys/dev/bxe/ecore_sp.c
2754
ECORE_MSG(sc, "About to configure %d rules, rx_accept_flags 0x%lx, tx_accept_flags 0x%lx\n",
sys/dev/bxe/ecore_sp.c
2887
ECORE_MSG(sc, "About to enqueue a new %d command. macs_list_len=%d\n",
sys/dev/bxe/ecore_sp.c
3039
ECORE_MSG(sc, "%s bin %d\n",
sys/dev/bxe/ecore_sp.c
3075
ECORE_MSG(sc, "About to configure a bin %d\n", cur_bin);
sys/dev/bxe/ecore_sp.c
308
ECORE_MSG(sc, "waiting for state to become %d\n", state);
sys/dev/bxe/ecore_sp.c
3105
ECORE_MSG(sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC\n",
sys/dev/bxe/ecore_sp.c
3138
ECORE_MSG(sc, "Deleting MAC. %d left,cnt is %d\n",
sys/dev/bxe/ecore_sp.c
314
ECORE_MSG(sc, "exit (cnt %d)\n", 5000 - cnt);
sys/dev/bxe/ecore_sp.c
3230
ECORE_MSG(sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC\n",
sys/dev/bxe/ecore_sp.c
3248
ECORE_MSG(sc, "Deleting MAC. %d left\n",
sys/dev/bxe/ecore_sp.c
3275
ECORE_MSG(sc, "p->mcast_list_len=%d\n", p->mcast_list_len);
sys/dev/bxe/ecore_sp.c
3526
ECORE_MSG(sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC, bin %d\n",
sys/dev/bxe/ecore_sp.c
3545
ECORE_MSG(sc, "About to set bin %d\n", bit);
sys/dev/bxe/ecore_sp.c
3576
ECORE_MSG(sc,
sys/dev/bxe/ecore_sp.c
3623
ECORE_MSG(sc, "Command %d, p->mcast_list_len=%d\n",
sys/dev/bxe/ecore_sp.c
3642
ECORE_MSG(sc, "p->mcast_list_len=%d\n", p->mcast_list_len);
sys/dev/bxe/ecore_sp.c
3761
ECORE_MSG(sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC\n",
sys/dev/bxe/ecore_sp.c
3796
ECORE_MSG(sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC\n",
sys/dev/bxe/ecore_sp.c
3803
ECORE_MSG(sc, "About to delete %d multicast MACs\n", cnt);
sys/dev/bxe/ecore_sp.c
3882
ECORE_MSG(sc, "Adding registry entry for [%02x:%02x:%02x:%02x:%02x:%02x]\n",
sys/dev/bxe/ecore_sp.c
3891
ECORE_MSG(sc, "Deleting a registry\n");
sys/dev/bxe/ecore_sp.c
4023
ECORE_MSG(sc, "o->total_pending_num=%d p->mcast_list_len=%d o->max_cmd_len=%d\n",
sys/dev/bxe/ecore_sp.c
4490
ECORE_MSG(sc, "Configuring RSS\n");
sys/dev/bxe/ecore_sp.c
4504
ECORE_MSG(sc, "rss_mode=%d\n", rss_mode);
sys/dev/bxe/ecore_sp.c
451
ECORE_MSG(sc, "vlan_mac_lock writer - There are readers; Busy\n");
sys/dev/bxe/ecore_sp.c
4549
ECORE_MSG(sc, "rss_engine_id=%d\n", data->rss_engine_id);
sys/dev/bxe/ecore_sp.c
455
ECORE_MSG(sc, "vlan_mac_lock writer - Taken\n");
sys/dev/bxe/ecore_sp.c
4594
ECORE_MSG(sc, "Not configuring RSS ramrod_flags=%lx\n",
sys/dev/bxe/ecore_sp.c
4657
ECORE_MSG(sc, "pending bit was=%lx\n", o->pending);
sys/dev/bxe/ecore_sp.c
4659
ECORE_MSG(sc, "pending bit now=%lx\n", o->pending);
sys/dev/bxe/ecore_sp.c
4740
ECORE_MSG(sc,
sys/dev/bxe/ecore_sp.c
4745
ECORE_MSG(sc, "primary cid %d: num tx-only cons %d\n",
sys/dev/bxe/ecore_sp.c
475
ECORE_MSG(sc, "vlan_mac_lock execute pending command with ramrod flags %lu\n",
sys/dev/bxe/ecore_sp.c
4811
ECORE_MSG(sc, "flags: active %d, cos %d, stats en %d\n",
sys/dev/bxe/ecore_sp.c
4977
ECORE_MSG(sc, "cid %d, tx bd page lo %x hi %x",
sys/dev/bxe/ecore_sp.c
5026
ECORE_MSG(sc, "setting context validation. cid %d, cos %d\n",
sys/dev/bxe/ecore_sp.c
5028
ECORE_MSG(sc, "context pointer %p\n", init->cxts[cos]);
sys/dev/bxe/ecore_sp.c
505
ECORE_MSG(sc, "Placing pending execution with ramrod flags %lu\n",
sys/dev/bxe/ecore_sp.c
5112
ECORE_MSG(sc, "sending forward tx-only ramrod");
sys/dev/bxe/ecore_sp.c
5120
ECORE_MSG(sc, "parameters received: cos: %d sp-id: %d\n",
sys/dev/bxe/ecore_sp.c
5130
ECORE_MSG(sc, "sending tx-only ramrod: cid %d, client-id %d, sp-client id %d, cos %d\n",
sys/dev/bxe/ecore_sp.c
526
ECORE_MSG(sc, "vlan_mac_lock - writer release encountered a pending request\n");
sys/dev/bxe/ecore_sp.c
562
ECORE_MSG(sc, "vlan_mac_lock - locked reader - number %d\n",
sys/dev/bxe/ecore_sp.c
5670
ECORE_MSG(sc, "Good state transition: %d(%d)->%d\n",
sys/dev/bxe/ecore_sp.c
5677
ECORE_MSG(sc, "Bad state transition request: %d %d\n", state, cmd);
sys/dev/bxe/ecore_sp.c
5732
ECORE_MSG(sc, "Good state transition: %d(%d)->%d\n",
sys/dev/bxe/ecore_sp.c
5738
ECORE_MSG(sc, "Bad state transition request: %d %d\n", state, cmd);
sys/dev/bxe/ecore_sp.c
5844
ECORE_MSG(sc,
sys/dev/bxe/ecore_sp.c
5981
ECORE_MSG(sc, "Good function state transition: %d(%d)->%d\n",
sys/dev/bxe/ecore_sp.c
5987
ECORE_MSG(sc, "Bad function state transition request: %d %d\n",
sys/dev/bxe/ecore_sp.c
6078
ECORE_MSG(sc, "function %d load_code %x\n",
sys/dev/bxe/ecore_sp.c
608
ECORE_MSG(sc, "vlan_mac_lock - decreased readers to %d\n",
sys/dev/bxe/ecore_sp.c
616
ECORE_MSG(sc, "vlan_mac_lock - reader release encountered a pending request\n");
sys/dev/bxe/ecore_sp.c
6197
ECORE_MSG(sc, "function %d reset_phase %x\n", ECORE_ABS_FUNC_ID(sc),
sys/dev/bxe/ecore_sp.c
6394
ECORE_MSG(sc,
sys/dev/bxe/ecore_sp.c
6425
ECORE_MSG(sc, "afex: ramrod lists, cmd 0x%x index 0x%x func_bit_map 0x%x func_to_clr 0x%x\n",
sys/dev/bxe/ecore_sp.c
6512
ECORE_MSG(sc, "Set timesync command params: drift_cmd = %d, offset_cmd = %d, add_sub_drift = %d, drift_val = %d, drift_period = %d, offset_lo = %d, offset_hi = %d\n",
sys/dev/bxe/ecore_sp.c
658
ECORE_MSG(sc, "get_n_elements - taking vlan_mac_lock (reader)\n");
sys/dev/bxe/ecore_sp.c
669
ECORE_MSG(sc, "copied element number %d to address %p element was:\n",
sys/dev/bxe/ecore_sp.c
676
ECORE_MSG(sc, "get_n_elements - releasing vlan_mac_lock (reader)\n");
sys/dev/bxe/ecore_sp.c
690
ECORE_MSG(sc, "Checking MAC %02x:%02x:%02x:%02x:%02x:%02x for ADD command\n", data->mac.mac[0], data->mac.mac[1], data->mac.mac[2], data->mac.mac[3], data->mac.mac[4], data->mac.mac[5]);
sys/dev/bxe/ecore_sp.c
711
ECORE_MSG(sc, "Checking VLAN %d for ADD command\n", data->vlan.vlan);
sys/dev/bxe/ecore_sp.c
727
ECORE_MSG(sc, "Checking VLAN_MAC (%02x:%02x:%02x:%02x:%02x:%02x, %d) for ADD command\n",
sys/dev/bxe/ecore_sp.c
748
ECORE_MSG(sc, "Checking VXLAN_FLTR (Inner:%pM, %d) for ADD command\n",
sys/dev/bxe/ecore_sp.c
76
ECORE_MSG(sc, "Setup the execution queue with the chunk length of %d\n",
sys/dev/bxe/ecore_sp.c
770
ECORE_MSG(sc, "Checking MAC %02x:%02x:%02x:%02x:%02x:%02x for DEL command\n", data->mac.mac[0], data->mac.mac[1], data->mac.mac[2], data->mac.mac[3], data->mac.mac[4], data->mac.mac[5]);
sys/dev/bxe/ecore_sp.c
788
ECORE_MSG(sc, "Checking VLAN %d for DEL command\n", data->vlan.vlan);
sys/dev/bxe/ecore_sp.c
805
ECORE_MSG(sc, "Checking VLAN_MAC (%02x:%02x:%02x:%02x:%02x:%02x, %d) for DEL command\n",
sys/dev/bxe/ecore_sp.c
828
ECORE_MSG(sc, "Checking VXLAN_FLTR (Inner:%pM, %d) for DEL command\n",
sys/dev/bxe/ecore_sp.c
83
ECORE_MSG(sc, "Deleting an exe_queue element\n");
sys/dev/bxe/ecore_sp.c
906
ECORE_MSG(sc, "Going to %s LLH configuration at entry %d\n",