mlx5_core_dbg
mlx5_core_dbg(mdev, "Not an IPSec offload device\n");
mlx5_core_dbg(mdev, "IPSec attached to netdevice\n");
mlx5_core_dbg(mdev, "Failed to init roce ns, capabilities not supported\n");
mlx5_core_dbg(mdev, "Failed to create encryption key (err = %d)\n", err);
mlx5_core_dbg(mdev, "Failed to create IPsec object (err = %d)\n", err);
mlx5_core_dbg(dev,
mlx5_core_dbg(dev, "err %d, status %d\n", err, status);
mlx5_core_dbg(dev, "descriptor at dma 0x%llx\n", (unsigned long long)(cmd->dma));
mlx5_core_dbg(dev, "dump command %s(0x%x) %s\n",
mlx5_core_dbg(dev, "command block:\n");
mlx5_core_dbg(dev, "writing 0x%x to command doorbell\n", 1 << ent->idx);
mlx5_core_dbg(dev, "err %d, delivery status %s(%d)\n",
mlx5_core_dbg(dev, format, ##__VA_ARGS__); \
mlx5_core_dbg(dev, "single=%x\n",
mlx5_core_dbg(dev, "repetitive=%x\n",
mlx5_core_dbg(dev, "sync=%x\n",
mlx5_core_dbg(dev, "clear=%x\n",
mlx5_core_dbg(dev, "on_demand=%x\n",
mlx5_core_dbg(dev, "enable=%x\n",
mlx5_core_dbg(dev, "log_sample_period=%x\n",
mlx5_core_dbg(dev, "counter_id[%d]=%x\n", i,
mlx5_core_dbg(eq->dev, "eqn %d, eqe type %s\n",
mlx5_core_dbg(dev, "event %s(%d) arrived on resource 0x%x\n",
mlx5_core_dbg(dev, "SRQ event %s(%d): srqn 0x%x\n",
mlx5_core_dbg(dev, "page request for func 0x%x, npages %d\n",
mlx5_core_dbg(chains->dev, "Flow table chains groups(%d)\n", chains->group_num);
mlx5_core_dbg(dev, "force teardown is not supported in the firmware\n");
mlx5_core_dbg(dev, "fast teardown is not supported in the firmware\n");
mlx5_core_dbg(dev, "FW requests reset, synd: %d\n", synd);
mlx5_core_dbg(dev, "vector 0x%jx\n", (uintmax_t)vector);
mlx5_core_dbg(dev,
mlx5_core_dbg(dev, "firmware version: %d.%d.%d\n",
mlx5_core_dbg(dev, "fast unload is disabled by user\n");
mlx5_core_dbg(dev, "force teardown firmware support=%d\n", force_teardown);
mlx5_core_dbg(dev, "fast teardown firmware support=%d\n", fast_teardown);
mlx5_core_dbg(dev, "Device in internal error state, giving up\n");
mlx5_core_dbg(dev, "Firmware couldn't do fast unload error: %d\n", err);
mlx5_core_dbg(dev, "Current Pkey table size %d Setting new size %d\n",
mlx5_core_dbg(dev, "Only ISSI 0 is supported\n");
mlx5_core_dbg(dev, "allocated completion EQN %d\n", eq->eqn);
mlx5_core_dbg(dev, "Full initializing bit dword = 0x%x\n",
mlx5_core_dbg(dev, "cmd exec failed %d\n", err);
mlx5_core_dbg(dev, "out 0x%x, key 0x%x, mkey 0x%x\n",
mlx5_core_dbg(dev, "err %d\n", err);
mlx5_core_dbg(dev, "npages %d, outlen %d\n", npages, outlen);
mlx5_core_dbg(dev, "requested %d %s pages for func_id 0x%x\n",
mlx5_core_dbg(mdev, "prio %d, buffer %d\n", prio, buffer[prio]);
mlx5_core_dbg(dev, "qpn = 0x%x\n", qp->qpn);
mlx5_core_dbg(mdev, "allocated UAR page: index %d, total bfregs %d\n",
mlx5_core_dbg(mdev, "%s local_lb\n",
#define mlx5e_dbg(_IGN, _priv, ...) mlx5_core_dbg((_priv)->mdev, __VA_ARGS__)
mlx5_core_dbg(mdev, "mlx5e_check_required_hca_cap() failed\n");
mlx5_core_dbg(mdev, "FPGA capability not present\n");
mlx5_core_dbg(mdev, "Initializing FPGA\n");
mlx5_core_dbg(mdev, "aso sq->sqn = 0x%x\n", sq->sqn);
mlx5_core_dbg(dev, "Allocating reserved GID %u\n", index);
mlx5_core_dbg(dev, "Freeing reserved GID %u\n", gid_index);
mlx5_core_dbg(dev, "Reserved %u GIDs starting at %u\n",
mlx5_core_dbg(dev, "%u GIDs starting at %u left reserved\n",