MPI3MR_INFO
mpi3mr_dprint(sc, MPI3MR_INFO, "Issuing Message Unit Reset(MUR)\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "IOC Status/Config after %s MUR is (0x%x)/(0x%x)\n",
mpi3mr_dprint(sc, MPI3MR_INFO, "IOCFacts data length mismatch "
mpi3mr_dprint(sc, MPI3MR_INFO, "IOCFacts data reqFrameSize mismatch "
mpi3mr_dprint(sc, MPI3MR_INFO, "ioc_num(%d), maxopQ(%d), maxopRepQ(%d), maxdh(%d),"
mpi3mr_dprint(sc, MPI3MR_INFO, "SGEModMask 0x%x SGEModVal 0x%x SGEModShift 0x%x\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "snapdump triggered: reason code: %s\n",
mpi3mr_dprint(sc, MPI3MR_INFO,"Issue CI Header Upload: command is in use\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "FW Package Version: %02d.%02d.%02d.%02d\n",
mpi3mr_dprint(sc, MPI3MR_INFO, "Current Personality: %s\n", personality);
mpi3mr_dprint(sc, MPI3MR_INFO, "%s\n", sc->fw_version);
mpi3mr_dprint(sc, MPI3MR_INFO, "Protocol=(");
mpi3mr_dprint(sc, MPI3MR_INFO, "Cannot alloc memory for chain bitmap\n");
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "SOD ioc_status: 0x%x ioc_control: 0x%x "
mpi3mr_dprint(sc, MPI3MR_INFO, "IOC state: %s IOC ready timeout: %d\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "Failed to re-register events, error: 0x%x\n",
mpi3mr_dprint(sc, MPI3MR_INFO, "Issuing Port Enable\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "Failed to issue port enable, error: 0x%x\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "An active cable with ReceptacleID %d cannot be powered.\n"
mpi3mr_dprint(sc, MPI3MR_INFO, "A cable with ReceptacleID %d is not running at optimal speed\n",
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :Event 0x%02x is not handled by driver\n",
mpi3mr_dprint(sc, MPI3MR_INFO, "%s reset due to %s(0x%x)\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "soft reset invoked: reason code: %s\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "reset is already in progress, exit\n");
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "Turn off events prior to reset\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "Soft Reset: %s\n", ((retval == 0) ? "SUCCESS" : "FAILED"));
mpi3mr_dprint(sc, MPI3MR_INFO, "sending shutdown notification\n");
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "cleaning up the controller\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "controller cleanup completed\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "Successfully created %d Operational Queue pairs\n",
mpi3mr_dprint(sc, MPI3MR_INFO, "Request Queue QD: %d Reply queue QD: %d\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(cam_sc->sc, MPI3MR_INFO, "mpi3mr_action "
mpi3mr_dprint(cam_sc->sc, MPI3MR_INFO, "mpi3mr_action faking success "
mpi3mr_dprint(cam_sc->sc, MPI3MR_INFO, "Unfreezing SIM queue\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :sas topology change: (%s)\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :\tphy(%02d), attached_handle(0x%04x): %s:"
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :pcie topology change: (%s)\n",
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :\tport(%02d), attached_handle(0x%04x): %s:"
mpi3mr_dprint(sc, MPI3MR_INFO, "Not available in driver's"
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :Unhandled reason code(0x%x)\n", __func__,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "EEDP capabilities disabled.\n");
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "Another reset is in progress, no need to trigger the reset\n");
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "tm_request dump\n");
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :All pending I/Os got completed while waiting! Reset not required\n", __func__);
mpi3mr_dprint(sc, MPI3MR_INFO, "%s :Pending I/Os after wait exaust is %d! Proceed with Reset\n", __func__,
mpi3mr_dprint(cam_sc->sc, MPI3MR_INFO, "tgtID: %d CDB: ", csio->ccb_h.target_id);
(MPI3MR_ERROR | MPI3MR_INFO | MPI3MR_FAULT);
mpi3mr_dprint(sc, MPI3MR_INFO, "allocating ioctl dma buffers\n");
mpi3mr_dprint(sc, MPI3MR_INFO, "Set up %d MSI-x interrupts\n", sc->msix_count);
mpi3mr_dprint(sc, MPI3MR_INFO, "Supported MSI-x count: %d "
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,
mpi3mr_dprint(sc, MPI3MR_INFO,