/* * Copyright (c) 2006 The DragonFly Project. All rights reserved. * Copyright (c) 1990 William Jolitz. * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to The DragonFly Project * by Matthew Dillon <dillon@backplane.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name of The DragonFly Project nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific, prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)npx.c 7.2 (Berkeley) 5/12/91 * $FreeBSD: src/sys/i386/isa/npx.c,v 1.80.2.3 2001/10/20 19:04:38 tegge Exp $ */ #include <sys/param.h> #include <sys/systm.h> #include <sys/bus.h> #include <sys/kernel.h> #include <sys/malloc.h> #include <sys/module.h> #include <sys/sysctl.h> #include <sys/proc.h> #include <sys/rman.h> #include <sys/signalvar.h> #include <sys/thread2.h> #include <machine/cputypes.h> #include <machine/frame.h> #include <machine/md_var.h> #include <machine/pcb.h> #include <machine/psl.h> #include <machine/specialreg.h> #include <machine/segments.h> #include <machine/globaldata.h> #define fldcw(addr) __asm("fldcw %0" : : "m" (*(addr))) #define fnclex() __asm("fnclex") #define fninit() __asm("fninit") #define fnop() __asm("fnop") #define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr))) #define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr))) #define fnstsw(addr) __asm __volatile("fnstsw %0" : "=m" (*(addr))) #define frstor(addr) __asm("frstor %0" : : "m" (*(addr))) #define fxrstor(addr) __asm("fxrstor64 %0" : : "m" (*(addr))) #define fxsave(addr) __asm __volatile("fxsave64 %0" : "=m" (*(addr))) #define ldmxcsr(csr) __asm __volatile("ldmxcsr %0" : : "m" (csr)) static void fpu_clean_state(void); /*static int npx_attach (device_t dev);*/ static struct krate badfprate = { 1 }; int cpu_fxsr = 0; uint32_t npx_mxcsr_mask = 0xFFBF; int mmxopt = 1; SYSCTL_INT(_kern, OID_AUTO, mmxopt, CTLFLAG_RD, &mmxopt, 0, "MMX/XMM optimized bcopy/copyin/copyout support"); static int hw_instruction_sse; SYSCTL_INT(_hw, OID_AUTO, instruction_sse, CTLFLAG_RD, &hw_instruction_sse, 0, "SIMD/MMX2 instructions available in CPU"); #if 0 /* * Attach routine - announce which it is, and wire into system */ static int npx_attach(device_t dev) { npxinit(); return (0); } #endif void init_fpu(int supports_sse) { cpu_fxsr = hw_instruction_sse = supports_sse; npxprobemask(); } /* * Probe the npx_mxcsr_mask */ void npxprobemask(void) { /*64-Byte alignment required for xsave*/ static union savefpu dummy __aligned(64); crit_enter(); /*stop_emulating();*/ fxsave(&dummy); npx_mxcsr_mask = ((uint32_t *)&dummy)[7]; /*stop_emulating();*/ crit_exit(); } /* * Initialize the floating point unit. */ void npxinit(void) { static union savefpu dummy __aligned(16); u_short control = __INITIAL_FPUCW__; u_int mxcsr = __INITIAL_MXCSR__; /* * fninit has the same h/w bugs as fnsave. Use the detoxified * fnsave to throw away any junk in the fpu. npxsave() initializes * the fpu and sets npxthread = NULL as important side effects. */ npxsave(&dummy); crit_enter(); /*stop_emulating();*/ fldcw(&control); ldmxcsr(mxcsr); fpusave(curthread->td_savefpu, 0); mdcpu->gd_npxthread = NULL; /*start_emulating();*/ crit_exit(); } /* * Free coprocessor (if we have it). */ void npxexit(void) { if (curthread == mdcpu->gd_npxthread) npxsave(curthread->td_savefpu); } /* * Implement the device not available (DNA) exception. gd_npxthread had * better be NULL. Restore the current thread's FP state and set gd_npxthread * to curthread. * * Interrupts are enabled and preemption can occur. Enter a critical * section to stabilize the FP state. */ int npxdna(struct trapframe *frame) { thread_t td = curthread; int didinit = 0; if (mdcpu->gd_npxthread != NULL) { kprintf("npxdna: npxthread = %p, curthread = %p\n", mdcpu->gd_npxthread, td); panic("npxdna"); } /* * Setup the initial saved state if the thread has never before * used the FP unit. This also occurs when a thread pushes a * signal handler and uses FP in the handler. */ if ((curthread->td_flags & TDF_USINGFP) == 0) { curthread->td_flags |= TDF_USINGFP; npxinit(); didinit = 1; } /* * The setting of gd_npxthread and the call to fpurstor() must not * be preempted by an interrupt thread or we will take an npxdna * trap and potentially save our current fpstate (which is garbage) * and then restore the garbage rather then the originally saved * fpstate. */ crit_enter(); /*stop_emulating();*/ /* * Record new context early in case frstor causes an IRQ13. */ mdcpu->gd_npxthread = td; /* * The following frstor may cause an IRQ13 when the state being * restored has a pending error. The error will appear to have been * triggered by the current (npx) user instruction even when that * instruction is a no-wait instruction that should not trigger an * error (e.g., fnclex). On at least one 486 system all of the * no-wait instructions are broken the same as frstor, so our * treatment does not amplify the breakage. On at least one * 386/Cyrix 387 system, fnclex works correctly while frstor and * fnsave are broken, so our treatment breaks fnclex if it is the * first FPU instruction after a context switch. */ if ((td->td_savefpu->sv_xmm.sv_env.en_mxcsr & ~npx_mxcsr_mask) && cpu_fxsr) { td->td_savefpu->sv_xmm.sv_env.en_mxcsr &= npx_mxcsr_mask; lwpsignal(curproc, curthread->td_lwp, SIGFPE); } fpurstor(curthread->td_savefpu, 0); crit_exit(); return (1); } /* * Wrapper for the fnsave instruction to handle h/w bugs. If there is an error * pending, then fnsave generates a bogus IRQ13 on some systems. Force * any IRQ13 to be handled immediately, and then ignore it. This routine is * often called at splhigh so it must not use many system services. In * particular, it's much easier to install a special handler than to * guarantee that it's safe to use npxintr() and its supporting code. * * WARNING! This call is made during a switch and the MP lock will be * setup for the new target thread rather then the current thread, so we * cannot do anything here that depends on the *_mplock() functions as * we may trip over their assertions. * * WARNING! When using fxsave we MUST fninit after saving the FP state. The * kernel will always assume that the FP state is 'safe' (will not cause * exceptions) for mmx/xmm use if npxthread is NULL. The kernel must still * setup a custom save area before actually using the FP unit, but it will * not bother calling fninit. This greatly improves kernel performance when * it wishes to use the FP unit. */ void npxsave(union savefpu *addr) { crit_enter(); /*stop_emulating();*/ fpusave(addr, 0); mdcpu->gd_npxthread = NULL; fninit(); /*start_emulating();*/ crit_exit(); } void fpusave(union savefpu *addr, uint64_t mask __unused) { if (cpu_fxsr) fxsave(addr); else fnsave(addr); } /* * Save the FP state to the mcontext structure. * * WARNING: If you want to try to npxsave() directly to mctx->mc_fpregs, * then it MUST be 16-byte aligned. Currently this is not guarenteed. */ void npxpush(mcontext_t *mctx) { thread_t td = curthread; if (td->td_flags & TDF_USINGFP) { if (mdcpu->gd_npxthread == td) { /* * XXX Note: This is a bit inefficient if the signal * handler uses floating point, extra faults will * occur. */ mctx->mc_ownedfp = _MC_FPOWNED_FPU; npxsave(td->td_savefpu); } else { mctx->mc_ownedfp = _MC_FPOWNED_PCB; } bcopy(td->td_savefpu, mctx->mc_fpregs, sizeof(mctx->mc_fpregs)); td->td_flags &= ~TDF_USINGFP; mctx->mc_fpformat = cpu_fxsr ? _MC_FPFMT_XMM : _MC_FPFMT_387; } else { mctx->mc_ownedfp = _MC_FPOWNED_NONE; mctx->mc_fpformat = _MC_FPFMT_NODEV; } } /* * Restore the FP state from the mcontext structure. */ void npxpop(mcontext_t *mctx) { thread_t td = curthread; switch(mctx->mc_ownedfp) { case _MC_FPOWNED_NONE: /* * If the signal handler used the FP unit but the interrupted * code did not, release the FP unit. Clear TDF_USINGFP will * force the FP unit to reinit so the interrupted code sees * a clean slate. */ if (td->td_flags & TDF_USINGFP) { if (td == mdcpu->gd_npxthread) npxsave(td->td_savefpu); td->td_flags &= ~TDF_USINGFP; } break; case _MC_FPOWNED_FPU: case _MC_FPOWNED_PCB: /* * Clear ownership of the FP unit and restore our saved state. * * NOTE: The signal handler may have set-up some FP state and * enabled the FP unit, so we have to restore no matter what. * * XXX: This is bit inefficient, if the code being returned * to is actively using the FP this results in multiple * kernel faults. * * WARNING: The saved state was exposed to userland and may * have to be sanitized to avoid a GP fault in the kernel. */ if (td == mdcpu->gd_npxthread) npxsave(td->td_savefpu); bcopy(mctx->mc_fpregs, td->td_savefpu, sizeof(*td->td_savefpu)); if ((td->td_savefpu->sv_xmm.sv_env.en_mxcsr & ~npx_mxcsr_mask) && cpu_fxsr) { krateprintf(&badfprate, "pid %d (%s) signal return from user: " "illegal FP MXCSR %08x\n", td->td_proc->p_pid, td->td_proc->p_comm, td->td_savefpu->sv_xmm.sv_env.en_mxcsr); td->td_savefpu->sv_xmm.sv_env.en_mxcsr &= npx_mxcsr_mask; } td->td_flags |= TDF_USINGFP; break; } } /* * On AuthenticAMD processors, the fxrstor instruction does not restore * the x87's stored last instruction pointer, last data pointer, and last * opcode values, except in the rare case in which the exception summary * (ES) bit in the x87 status word is set to 1. * * In order to avoid leaking this information across processes, we clean * these values by performing a dummy load before executing fxrstor(). */ static void fpu_clean_state(void) { u_short status; /* * Clear the ES bit in the x87 status word if it is currently * set, in order to avoid causing a fault in the upcoming load. */ fnstsw(&status); if (status & 0x80) fnclex(); /* * Load the dummy variable into the x87 stack. This mangles * the x87 stack, but we don't care since we're about to call * fxrstor() anyway. */ __asm __volatile("ffree %st(7); fldz"); } void fpurstor(union savefpu *addr, uint64_t mask __unused) { if (cpu_fxsr) { fpu_clean_state(); fxrstor(addr); } else { frstor(addr); } }
