KdPrint
KdPrint(("ioctl=%x in=%p len=%d out=%p len=%d\n",
KdPrint(("invalid command!"));
KdPrint(("cam_scan_callback: failure status = %x",ccb->ccb_h.status));
KdPrint(("Scan bus successfully!"));
KdPrint(("%s: %d*%d=%d bytes",
KdPrint(("%s: %d*%d=%d bytes, order %d",
KdPrint(("memory leak for freelist %s (%d/%d)", f->tag, f->count, f->reserved_count));
KdPrint(("memory leak for dma freelist %s (%d/%d)", f->tag, f->count, f->reserved_count));
KdPrint(("fail to initialize %p", hba));
KdPrint(("flusing dev %p", vd));
KdPrint(("flush result %d", pCmd->Result));
KdPrint(("hpt_shutdown_vbus"));
KdPrint(("hpt_shutdown_vbus done"));
KdPrint(("pCmd %p timeout", pCmd));
KdPrint(("os_cmddone(%p, %d)", pCmd, pCmd->Result));
KdPrint(("hpt_probe: adapter at PCI %d:%d:%d, IRQ %d",
KdPrint(("hpt_scsi_io: ccb %x id %d lun %d cdb %x-%x-%x",
KdPrint(("Failed to allocate command!"));
KdPrint(("hpt_attach(%d/%d/%d)", pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev)));
KdPrint(("bus_dmamap_load return %d", error));
KdPrint(("hpt_action(fn=%d, id=%d)", ccb->ccb_h.func_code, ccb->ccb_h.target_id));
KdPrint(("hpt_async"));
KdPrint(("hpt_shutdown(dev=%p)", dev));
KdPrint(("SET_ARRAY_STATE(%x, %d)", param[0], param[1]));
KdPrint(("hptiop: set config send cmd failed"));
KdPrint(("hptiop: set config send cmd failed"));
KdPrint(("hptiop: set config send cmd failed"));
KdPrint(("hba->ops=%p\n", hba->ops));
KdPrint(("hptiop: attach(%d, %d/%d/%d) ops=%p\n", unit,
KdPrint(("ccb=%p %x-%x-%x\n",
KdPrint(("hptiop: func_code=%x tid=%x lun=%x nsegs=%d\n",
KdPrint(("hptiop: received outbound msg %x\n", msg));
KdPrint(("hptiop: received outbound msg %x\n", msg));
KdPrint(("hptiop: get config send cmd failed"));
KdPrint(("hptiop: get config send cmd failed"));
KdPrint(("hptiop: header size %x/%x type %x/%x",
KdPrint(("hptiop: maxreq %x reqsz %x datalen %x maxdev %x sdram %x",
KdPrint(("channel %d: Set Features failed\n", channelIndex));
KdPrint(("Failed to enable DMA, channel=%d", channelIndex));
KdPrint(("RR18xx: io base address 0x%p\n", pMvSataAdapter->adapterIoBaseAddress));
KdPrint(("Allocate command blocks\n"));
KdPrint(("pCommandBlocks:%p\n",pAdapter->pCommandBlocks));
KdPrint(("Allocate PRD Tables\n"));
KdPrint(("prdTableAddr:%p\n",pAdapter->prdTableAddr));
KdPrint(("RR18xx[%d]: channel %d is connected\n",
KdPrint(("pAdapter->mvChannel[channel].online:%x, channel:%d\n",
KdPrint(("Initialize Devices\n"));
KdPrint(("fMvResetBus(%p)", _vbus_p));
KdPrint(("fMvResetBus() done"));
KdPrint(("pPRDTable:%p\n",pPRDTable));
KdPrint(("ENXIO\n"));
KdPrint(("Device is offline"));
KdPrint(("auto rebuild.\n"));
KdPrint(("hpt_action(%lx,%lx{%x})\n", (u_long)sim, (u_long)ccb, ccb->ccb_h.func_code));
KdPrint(("reset bus\n"));
KdPrint(("invalid cmd\n"));
KdPrint(("requestQueue addr is 0x%llX", (HPT_U64)(ULONG_PTR)req_dma_addr));
KdPrint(("bus_dmamap_load return %d\n", error));
KdPrint(("fOsCommandDone(pcmd=%p, result=%d)\n", pCmd, pCmd->Result));
KdPrint(("RR18xx[%d,%d]: request queue allocated: 0x%p",
KdPrint(("DPC Queue full!\n"));
KdPrint(("RR18xx[%d,%d]: response queue allocated: 0x%p",
KdPrint(("IAL Error in IDENTIFY info: LBA not supported\n"));
KdPrint(("%25s - %s\n", "Capabilities", "LBA supported"));
KdPrint(("IAL Error in IDENTIFY info: DMA not supported\n"));
KdPrint(("%25s - %s\n", "Capabilities", "DMA supported"));
KdPrint(("IAL Error in IDENTIFY info: not able to find PIO mode\n"));
KdPrint(("%25s - 0x%02x\n", "PIO modes supported",
KdPrint(("IAL Error in IDENTIFY info: not able to find UDMA mode\n"));
KdPrint(("%25s - %s\n", "LBA48 addressing", "supported"));
KdPrint(("%25s - %s\n", "LBA48 addressing", "Not supported"));
KdPrint(("RR18xx [%d]: start channel (%d)", pMvSataAdapter->adapterId,
KdPrint(("RR18xx [%d]: Disable 8 bit PIO (CFA enabled) \n",
KdPrint(("RR18xx [%d]: channel %d, write cache enabled\n",
KdPrint(("RR18xx [%d]: channel %d, write cache not supported\n",
KdPrint(("RR18xx [%d]: channel =%d, disable write cache\n",
KdPrint(("RR18xx [%d]: channel=%d, write cache disabled\n",
KdPrint(("RR18xx [%d] Set transfer mode XFER_PIO_SLOW\n",
KdPrint(("RR18xx [%d] Set transfer mode XFER_PIO_4\n",
KdPrint(("RR18xx [%d] Set transfer mode XFER_UDMA_%d\n",
KdPrint(("RR18xx [%d]: channel=%d, read look ahead enabled\n",
KdPrint(("RR18xx [%d]: channel %d, Read Look Ahead not supported\n",
KdPrint(("RR18xx [%d]:channel %d, disable read look ahead\n",
KdPrint(("RR18xx [%d]:channel %d, read look ahead disabled\n",
KdPrint(("RR18xx [%d]: channel %d config EDMA, Non Queued Mode\n",
KdPrint(("RR18xx [%d,%d]: new device connected\n",
KdPrint(("RR18xx [%d,%d]: device disconnected\n",
KdPrint(("RR18xx [%d,%d]: channel removed\n",
KdPrint(("RR18xx [%d,%d]: channel already removed!!\n",
KdPrint(("RR18xx [%d,%d]: device connected event received\n",
KdPrint(("RR18xx [%d,%d]: device disconnected event received \n",
KdPrint(("RR18xx: DEVICE error event received, pci cause "
KdPrint(("pAdapter->pFreePRDLink:%p\n",pAdapter->pFreePRDLink));
KdPrint(("error!\n"));
KdPrint(("outstandingCommands is %d, wait..\n", pAdapter->outstandingCommands));
KdPrint(("ioctl=%x in=%p len=%d out=%p len=%d\n",
KdPrint(("invalid command!"));
KdPrint(("%s: %d*%d=%d bytes",
KdPrint(("%s: %d*%d=%d bytes, order %d",
KdPrint(("memory leak for freelist %s (%d/%d)", f->tag, f->count, f->reserved_count));
KdPrint(("memory leak for dma freelist %s (%d/%d)", f->tag, f->count, f->reserved_count));
KdPrint(("fail to initialize %p", hba));
KdPrint(("flusing dev %p", vd));
KdPrint(("flush result %d", pCmd->Result));
KdPrint(("hpt_shutdown_vbus"));
KdPrint(("hpt_shutdown_vbus done"));
KdPrint(("pCmd %p timeout", pCmd));
KdPrint(("os_cmddone(%p, %d)", pCmd, pCmd->Result));
KdPrint(("hpt_scsi_io: ccb %x id %d lun %d cdb %x-%x-%x",
KdPrint(("Failed to allocate command!"));
KdPrint(("hpt_probe: adapter at PCI %d:%d:%d, IRQ %d",
KdPrint(("bus_dmamap_load return %d", error));
KdPrint(("hpt_action(fn=%d, id=%d)", ccb->ccb_h.func_code, ccb->ccb_h.target_id));
KdPrint(("hpt_async"));
KdPrint(("hpt_shutdown(dev=%p)", dev));
KdPrint(("hpt_attach(%d/%d/%d)", pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev)));
KdPrint(("SET_ARRAY_STATE(%x, %d)", param[0], param[1]));