Symbol: DEBUGOUT
sys/dev/netif/ig_hal/e1000_80003es2lan.c
1105
DEBUGOUT("Error Resetting the PHY\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
429
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
648
DEBUGOUT("MNG configuration cycle has not completed.\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
703
DEBUGOUT("Waiting for forced speed/duplex link on GG82563 phy.\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
832
DEBUGOUT("PCI-E Master disable polling has failed.\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
834
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
849
DEBUGOUT("Issuing a global reset to MAC\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
862
DEBUGOUT("Error disabling far-end loopback\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
864
DEBUGOUT("Error disabling far-end loopback\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
900
DEBUGOUT("Error initializing identification LED\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
903
DEBUGOUT("Initializing the IEEE VLAN\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
910
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
929
DEBUGOUT("Error disabling far-end loopback\n");
sys/dev/netif/ig_hal/e1000_80003es2lan.c
931
DEBUGOUT("Error disabling far-end loopback\n");
sys/dev/netif/ig_hal/e1000_82540.c
277
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82540.c
292
DEBUGOUT("Issuing a global reset to 82540/82545/82546 MAC\n");
sys/dev/netif/ig_hal/e1000_82540.c
340
DEBUGOUT("Error initializing identification LED\n");
sys/dev/netif/ig_hal/e1000_82540.c
345
DEBUGOUT("Initializing the IEEE VLAN\n");
sys/dev/netif/ig_hal/e1000_82540.c
355
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_82540.c
702
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82541.c
1208
DEBUGOUT("Initialization script not necessary.\n");
sys/dev/netif/ig_hal/e1000_82541.c
299
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82541.c
321
DEBUGOUT("Issuing a global reset to 82541/82547 MAC\n");
sys/dev/netif/ig_hal/e1000_82541.c
356
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82541.c
383
DEBUGOUT("Error initializing identification LED\n");
sys/dev/netif/ig_hal/e1000_82541.c
394
DEBUGOUT("Initializing the IEEE VLAN\n");
sys/dev/netif/ig_hal/e1000_82541.c
401
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_82541.c
648
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_82541.c
685
DEBUGOUT("Error getting link speed and duplex\n");
sys/dev/netif/ig_hal/e1000_82542.c
201
DEBUGOUT("Disabling MWI on 82542 rev 2\n");
sys/dev/netif/ig_hal/e1000_82542.c
205
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82542.c
220
DEBUGOUT("Issuing a global reset to 82542/82543 MAC\n");
sys/dev/netif/ig_hal/e1000_82542.c
259
DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
sys/dev/netif/ig_hal/e1000_82542.c
279
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_82542.c
353
DEBUGOUT("Initializing Flow Control address, type and timer regs\n");
sys/dev/netif/ig_hal/e1000_82542.c
579
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82543.c
1033
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82543.c
1100
DEBUGOUT("Forcing Speed and Duplex\n");
sys/dev/netif/ig_hal/e1000_82543.c
1103
DEBUGOUT("Error Forcing Speed and Duplex\n");
sys/dev/netif/ig_hal/e1000_82543.c
1119
DEBUGOUT("Valid link established!!!\n");
sys/dev/netif/ig_hal/e1000_82543.c
1130
DEBUGOUT("Unable to establish link!!!\n");
sys/dev/netif/ig_hal/e1000_82543.c
1162
DEBUGOUT("Auto-negotiation enabled\n");
sys/dev/netif/ig_hal/e1000_82543.c
1176
DEBUGOUT("No signal detected\n");
sys/dev/netif/ig_hal/e1000_82543.c
1258
DEBUGOUT("Error configuring MAC to PHY settings\n");
sys/dev/netif/ig_hal/e1000_82543.c
127
DEBUGOUT("Resetting PHY during init failed.\n");
sys/dev/netif/ig_hal/e1000_82543.c
1271
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_82543.c
1284
DEBUGOUT("Error getting link speed and duplex\n");
sys/dev/netif/ig_hal/e1000_82543.c
1358
DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
sys/dev/netif/ig_hal/e1000_82543.c
1371
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_82543.c
1381
DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
sys/dev/netif/ig_hal/e1000_82543.c
289
DEBUGOUT("TBI compatibility workaround for 82543 only.\n");
sys/dev/netif/ig_hal/e1000_82543.c
313
DEBUGOUT("TBI compatibility workaround for 82543 only.\n");
sys/dev/netif/ig_hal/e1000_82543.c
341
DEBUGOUT("TBI compatibility workaround for 82543 only.\n");
sys/dev/netif/ig_hal/e1000_82543.c
904
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82543.c
921
DEBUGOUT("Issuing a global reset to 82543/82544 MAC\n");
sys/dev/netif/ig_hal/e1000_82543.c
970
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_82571.c
1071
DEBUGOUT("PCI-E Master disable polling has failed.\n");
sys/dev/netif/ig_hal/e1000_82571.c
1073
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82571.c
1101
DEBUGOUT("Issuing a global reset to MAC\n");
sys/dev/netif/ig_hal/e1000_82571.c
1199
DEBUGOUT("Error initializing identification LED\n");
sys/dev/netif/ig_hal/e1000_82571.c
1202
DEBUGOUT("Initializing the IEEE VLAN\n");
sys/dev/netif/ig_hal/e1000_82571.c
1215
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_82571.c
1674
DEBUGOUT("AN_UP -> AN_PROG\n");
sys/dev/netif/ig_hal/e1000_82571.c
168
DEBUGOUT("Error getting PHY ID\n");
sys/dev/netif/ig_hal/e1000_82571.c
1694
DEBUGOUT("FORCED_UP -> AN_PROG\n");
sys/dev/netif/ig_hal/e1000_82571.c
1709
DEBUGOUT("AN_PROG -> AN_UP\n");
sys/dev/netif/ig_hal/e1000_82571.c
1715
DEBUGOUT("AN_PROG -> DOWN\n");
sys/dev/netif/ig_hal/e1000_82571.c
1731
DEBUGOUT("Error config flow control\n");
sys/dev/netif/ig_hal/e1000_82571.c
1737
DEBUGOUT("AN_PROG -> FORCED_UP\n");
sys/dev/netif/ig_hal/e1000_82571.c
1753
DEBUGOUT("DOWN -> AN_PROG\n");
sys/dev/netif/ig_hal/e1000_82571.c
1760
DEBUGOUT("ANYSTATE -> DOWN\n");
sys/dev/netif/ig_hal/e1000_82571.c
1777
DEBUGOUT("ANYSTATE -> DOWN\n");
sys/dev/netif/ig_hal/e1000_82571.c
1789
DEBUGOUT("ANYSTATE -> AN_PROG\n");
sys/dev/netif/ig_hal/e1000_82571.c
1813
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82571.c
429
DEBUGOUT("Please update your 82571 Bootagent\n");
sys/dev/netif/ig_hal/e1000_82571.c
542
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
sys/dev/netif/ig_hal/e1000_82571.c
560
DEBUGOUT("Driver can't access the NVM\n");
sys/dev/netif/ig_hal/e1000_82571.c
616
DEBUGOUT("Driver can't access the PHY\n");
sys/dev/netif/ig_hal/e1000_82571.c
919
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_82571.c
962
DEBUGOUT("MNG configuration cycle has not completed.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1006
DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1016
DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1082
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1150
DEBUGOUT("MNG configuration cycle has not completed.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1219
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_82575.c
1370
DEBUGOUT("2500 Mbs, ");
sys/dev/netif/ig_hal/e1000_82575.c
1371
DEBUGOUT("Full Duplex\n");
sys/dev/netif/ig_hal/e1000_82575.c
1439
DEBUGOUT("PCI-E Master disable polling has failed.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1444
DEBUGOUT("PCI-E Set completion timeout has failed.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1446
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82575.c
1457
DEBUGOUT("Issuing a global reset to MAC\n");
sys/dev/netif/ig_hal/e1000_82575.c
1467
DEBUGOUT("Auto Read Done did not complete\n");
sys/dev/netif/ig_hal/e1000_82575.c
1501
DEBUGOUT("Error initializing identification LED\n");
sys/dev/netif/ig_hal/e1000_82575.c
1506
DEBUGOUT("Initializing the IEEE VLAN\n");
sys/dev/netif/ig_hal/e1000_82575.c
1513
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_82575.c
1518
DEBUGOUT("Zeroing the UTA\n");
sys/dev/netif/ig_hal/e1000_82575.c
1584
DEBUGOUT("Error resetting the PHY.\n");
sys/dev/netif/ig_hal/e1000_82575.c
1687
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82575.c
1903
DEBUGOUT("PHY module has not been recognized\n");
sys/dev/netif/ig_hal/e1000_82575.c
1932
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82575.c
1977
DEBUGOUT("Running reset init script for 82575\n");
sys/dev/netif/ig_hal/e1000_82575.c
2178
DEBUGOUT("Queue disable timed out after 10ms\n");
sys/dev/netif/ig_hal/e1000_82575.c
2439
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82575.c
2485
DEBUGOUT("PCI-E Master disable polling has failed.\n");
sys/dev/netif/ig_hal/e1000_82575.c
2487
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_82575.c
2526
DEBUGOUT("Auto Read Done did not complete\n");
sys/dev/netif/ig_hal/e1000_82575.c
2538
DEBUGOUT("Could not reset MDICNFG based on EEPROM\n");
sys/dev/netif/ig_hal/e1000_82575.c
2590
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82575.c
2597
DEBUGOUT("NVM Checksum Invalid\n");
sys/dev/netif/ig_hal/e1000_82575.c
2627
DEBUGOUT("NVM Read Error while updating checksum.\n");
sys/dev/netif/ig_hal/e1000_82575.c
2636
DEBUGOUT("NVM Write Error while updating checksum.\n");
sys/dev/netif/ig_hal/e1000_82575.c
2661
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_82575.c
2701
DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n");
sys/dev/netif/ig_hal/e1000_82575.c
2711
DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n");
sys/dev/netif/ig_hal/e1000_82575.c
2901
DEBUGOUT("Error committing the PHY changes\n");
sys/dev/netif/ig_hal/e1000_82575.c
3000
DEBUGOUT("Error committing the PHY changes\n");
sys/dev/netif/ig_hal/e1000_82575.c
3049
DEBUGOUT("LPI Clock Stop Bit should not be set!\n");
sys/dev/netif/ig_hal/e1000_82575.c
3338
DEBUGOUT("I2C byte read error - Retrying.\n");
sys/dev/netif/ig_hal/e1000_82575.c
3340
DEBUGOUT("I2C byte read error.\n");
sys/dev/netif/ig_hal/e1000_82575.c
3412
DEBUGOUT("I2C byte write error - Retrying.\n");
sys/dev/netif/ig_hal/e1000_82575.c
3414
DEBUGOUT("I2C byte write error.\n");
sys/dev/netif/ig_hal/e1000_82575.c
3570
DEBUGOUT("I2C ack was not received.\n");
sys/dev/netif/ig_hal/e1000_82575.c
774
DEBUGOUT("Soft resetting SGMII attached PHY...\n");
sys/dev/netif/ig_hal/e1000_api.c
103
DEBUGOUT("PHY Initialization Error\n");
sys/dev/netif/ig_hal/e1000_api.c
107
DEBUGOUT("phy.init_phy_params was NULL\n");
sys/dev/netif/ig_hal/e1000_api.c
129
DEBUGOUT("Mailbox Initialization Error\n");
sys/dev/netif/ig_hal/e1000_api.c
133
DEBUGOUT("mbx.init_mbx_params was NULL\n");
sys/dev/netif/ig_hal/e1000_api.c
433
DEBUGOUT("ERROR: MAC type could not be set properly.\n");
sys/dev/netif/ig_hal/e1000_api.c
438
DEBUGOUT("ERROR: Registers not mapped\n");
sys/dev/netif/ig_hal/e1000_api.c
51
DEBUGOUT("MAC Initialization Error\n");
sys/dev/netif/ig_hal/e1000_api.c
517
DEBUGOUT("Hardware not supported\n");
sys/dev/netif/ig_hal/e1000_api.c
55
DEBUGOUT("mac.init_mac_params was NULL\n");
sys/dev/netif/ig_hal/e1000_api.c
77
DEBUGOUT("NVM Initialization Error\n");
sys/dev/netif/ig_hal/e1000_api.c
81
DEBUGOUT("nvm.init_nvm_params was NULL\n");
sys/dev/netif/ig_hal/e1000_i210.c
1008
DEBUGOUT("MNG configuration cycle has not completed.\n");
sys/dev/netif/ig_hal/e1000_i210.c
118
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
sys/dev/netif/ig_hal/e1000_i210.c
198
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
sys/dev/netif/ig_hal/e1000_i210.c
218
DEBUGOUT("Driver can't access the NVM\n");
sys/dev/netif/ig_hal/e1000_i210.c
337
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_i210.c
359
DEBUGOUT("Shadow RAM write EEWR timed out\n");
sys/dev/netif/ig_hal/e1000_i210.c
434
DEBUGOUT("MAC Addr not found in iNVM\n");
sys/dev/netif/ig_hal/e1000_i210.c
651
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ig_hal/e1000_i210.c
666
DEBUGOUT("NVM Read Error while updating checksum.\n");
sys/dev/netif/ig_hal/e1000_i210.c
676
DEBUGOUT("NVM Write Error while updating checksum.\n");
sys/dev/netif/ig_hal/e1000_i210.c
724
DEBUGOUT("Flash update time out\n");
sys/dev/netif/ig_hal/e1000_i210.c
733
DEBUGOUT("Flash update complete\n");
sys/dev/netif/ig_hal/e1000_i210.c
735
DEBUGOUT("Flash update time out\n");
sys/dev/netif/ig_hal/e1000_i210.c
828
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
1133
DEBUGOUT("max_frame_size not set.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
1139
DEBUGOUT("Speed not set.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
1809
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
1894
DEBUGOUT("SW has already locked the resource.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
1945
DEBUGOUT("Semaphore unexpectedly released by sw/fw/hw\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
2246
DEBUGOUT("Unsupported SMB frequency in PHY\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3063
DEBUGOUT("LAN_INIT_DONE not set, increase timeout\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
336
DEBUGOUT("Failed to initialize PHY flow\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3442
DEBUGOUT("ERROR: No valid NVM bank present\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3456
DEBUGOUT("Unable to determine valid NVM bank via EEC - reading flash signature\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3485
DEBUGOUT("ERROR: No valid NVM bank present\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3515
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3524
DEBUGOUT("Could not detect valid bank, assuming bank 0\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3608
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3617
DEBUGOUT("Could not detect valid bank, assuming bank 0\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3665
DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3726
DEBUGOUT("Flash controller busy, cannot get access\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
376
DEBUGOUT("Required LANPHYPC toggle blocked by ME\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3918
DEBUGOUT("Timeout error - flash cycle did not complete.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
3996
DEBUGOUT("Timeout error - flash cycle did not complete.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4025
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4077
DEBUGOUT("Could not detect valid bank, assuming bank 0\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4142
DEBUGOUT("Flash commit failed.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4239
DEBUGOUT("Could not detect valid bank, assuming bank 0\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4300
DEBUGOUT("Flash commit failed.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4498
DEBUGOUT("Timeout error - flash cycle did not complete.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4587
DEBUGOUT("Timeout error - flash cycle did not complete.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4821
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4954
DEBUGOUT("PCI-E Master disable polling has failed.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
4956
DEBUGOUT("Masking off all interrupts\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
5015
DEBUGOUT("Issuing a global reset to ich8lan\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
5090
DEBUGOUT("Error initializing identification LED\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
5096
DEBUGOUT("Zeroing the MTA\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
5522
DEBUGOUT("Workaround applies to ICH8 only.\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
574
DEBUGOUT("Cannot determine PHY addr. Erroring out\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
5793
DEBUGOUT("Failed to setup iRST\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
6011
DEBUGOUT("Auto Read Done did not complete\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
6021
DEBUGOUT("PHY Reset Asserted not set - needs delay\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
6032
DEBUGOUT("EEPROM not present\n");
sys/dev/netif/ig_hal/e1000_ich8lan.c
664
DEBUGOUT("ERROR: Flash registers not mapped\n");
sys/dev/netif/ig_hal/e1000_mac.c
1047
DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
sys/dev/netif/ig_hal/e1000_mac.c
1115
DEBUGOUT("Flow control param set incorrectly\n");
sys/dev/netif/ig_hal/e1000_mac.c
1154
DEBUGOUT("Never got a valid link from auto-neg!!!\n");
sys/dev/netif/ig_hal/e1000_mac.c
1163
DEBUGOUT("Error while checking for link\n");
sys/dev/netif/ig_hal/e1000_mac.c
1169
DEBUGOUT("Valid Link Found\n");
sys/dev/netif/ig_hal/e1000_mac.c
1206
DEBUGOUT("Auto-negotiation enabled\n");
sys/dev/netif/ig_hal/e1000_mac.c
1220
DEBUGOUT("No signal detected\n");
sys/dev/netif/ig_hal/e1000_mac.c
1338
DEBUGOUT("Flow control param set incorrectly\n");
sys/dev/netif/ig_hal/e1000_mac.c
1381
DEBUGOUT("Error forcing flow control settings\n");
sys/dev/netif/ig_hal/e1000_mac.c
1403
DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1465
DEBUGOUT("Flow Control = FULL.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1468
DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1483
DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1497
DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1503
DEBUGOUT("Flow Control = NONE.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1512
DEBUGOUT("Error getting link speed and duplex\n");
sys/dev/netif/ig_hal/e1000_mac.c
1524
DEBUGOUT("Error forcing flow control settings\n");
sys/dev/netif/ig_hal/e1000_mac.c
1542
DEBUGOUT("PCS Auto Neg has not completed.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1598
DEBUGOUT("Flow Control = FULL.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1601
DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1616
DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1630
DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1636
DEBUGOUT("Flow Control = NONE.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1648
DEBUGOUT("Error forcing flow control settings\n");
sys/dev/netif/ig_hal/e1000_mac.c
1675
DEBUGOUT("1000 Mbs, ");
sys/dev/netif/ig_hal/e1000_mac.c
1678
DEBUGOUT("100 Mbs, ");
sys/dev/netif/ig_hal/e1000_mac.c
1681
DEBUGOUT("10 Mbs, ");
sys/dev/netif/ig_hal/e1000_mac.c
1686
DEBUGOUT("Full Duplex\n");
sys/dev/netif/ig_hal/e1000_mac.c
1689
DEBUGOUT("Half Duplex\n");
sys/dev/netif/ig_hal/e1000_mac.c
1740
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1759
DEBUGOUT("Driver can't access the NVM\n");
sys/dev/netif/ig_hal/e1000_mac.c
1805
DEBUGOUT("Auto read by HW from NVM has not completed.\n");
sys/dev/netif/ig_hal/e1000_mac.c
1828
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_mac.c
2115
DEBUGOUT("Master requests are pending.\n");
sys/dev/netif/ig_hal/e1000_mac.c
2135
DEBUGOUT("Not in Adaptive IFS mode!\n");
sys/dev/netif/ig_hal/e1000_mac.c
2163
DEBUGOUT("Not in Adaptive IFS mode!\n");
sys/dev/netif/ig_hal/e1000_mac.c
2202
DEBUGOUT("Invalid MDI setting detected\n");
sys/dev/netif/ig_hal/e1000_mac.c
385
DEBUGOUT("Programming MAC Address into RAR[0]\n");
sys/dev/netif/ig_hal/e1000_mac.c
432
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_mac.c
452
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_mac.c
462
DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n");
sys/dev/netif/ig_hal/e1000_mac.c
768
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_mac.c
808
DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
sys/dev/netif/ig_hal/e1000_mac.c
821
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_mac.c
830
DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
sys/dev/netif/ig_hal/e1000_mac.c
873
DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
sys/dev/netif/ig_hal/e1000_mac.c
886
DEBUGOUT("Error configuring flow control\n");
sys/dev/netif/ig_hal/e1000_mac.c
895
DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
sys/dev/netif/ig_hal/e1000_mac.c
911
DEBUGOUT("SERDES: Link up - forced.\n");
sys/dev/netif/ig_hal/e1000_mac.c
915
DEBUGOUT("SERDES: Link down - force failed.\n");
sys/dev/netif/ig_hal/e1000_mac.c
928
DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n");
sys/dev/netif/ig_hal/e1000_mac.c
931
DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n");
sys/dev/netif/ig_hal/e1000_mac.c
935
DEBUGOUT("SERDES: Link down - no sync.\n");
sys/dev/netif/ig_hal/e1000_mac.c
939
DEBUGOUT("SERDES: Link down - autoneg failed\n");
sys/dev/netif/ig_hal/e1000_mac.c
983
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_manage.c
403
DEBUGOUT("Hardware doesn't support host interface command.\n");
sys/dev/netif/ig_hal/e1000_manage.c
408
DEBUGOUT("Firmware is not present.\n");
sys/dev/netif/ig_hal/e1000_manage.c
414
DEBUGOUT("Buffer length failure.\n");
sys/dev/netif/ig_hal/e1000_manage.c
421
DEBUGOUT("E1000_HOST_EN bit disabled.\n");
sys/dev/netif/ig_hal/e1000_manage.c
448
DEBUGOUT("Command has failed with no status valid.\n");
sys/dev/netif/ig_hal/e1000_manage.c
476
DEBUGOUT("Hardware doesn't support loading FW by the driver\n");
sys/dev/netif/ig_hal/e1000_manage.c
483
DEBUGOUT("E1000_HOST_EN bit disabled.\n");
sys/dev/netif/ig_hal/e1000_manage.c
487
DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n");
sys/dev/netif/ig_hal/e1000_manage.c
492
DEBUGOUT("Buffer length failure.\n");
sys/dev/netif/ig_hal/e1000_manage.c
517
DEBUGOUT("FW reset failed.\n");
sys/dev/netif/ig_hal/e1000_manage.c
533
DEBUGOUT("FW reset failed.\n");
sys/dev/netif/ig_hal/e1000_manage.c
571
DEBUGOUT("New FW did not start within timeout period.\n");
sys/dev/netif/ig_hal/e1000_manage.c
80
DEBUGOUT("ARC subsystem not valid.\n");
sys/dev/netif/ig_hal/e1000_manage.c
87
DEBUGOUT("E1000_HOST_EN bit disabled.\n");
sys/dev/netif/ig_hal/e1000_manage.c
99
DEBUGOUT("Previous command timeout failed .\n");
sys/dev/netif/ig_hal/e1000_nvm.c
1176
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
1183
DEBUGOUT("NVM Checksum Invalid\n");
sys/dev/netif/ig_hal/e1000_nvm.c
1209
DEBUGOUT("NVM Read Error while updating checksum.\n");
sys/dev/netif/ig_hal/e1000_nvm.c
1217
DEBUGOUT("NVM Write Error while updating checksum.\n");
sys/dev/netif/ig_hal/e1000_nvm.c
289
DEBUGOUT("Could not acquire NVM grant\n");
sys/dev/netif/ig_hal/e1000_nvm.c
430
DEBUGOUT("SPI NVM Status error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
462
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_nvm.c
522
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_nvm.c
575
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_nvm.c
623
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_nvm.c
706
DEBUGOUT("nvm parameter(s) out of bounds\n");
sys/dev/netif/ig_hal/e1000_nvm.c
744
DEBUGOUT("NVM Write did not complete\n");
sys/dev/netif/ig_hal/e1000_nvm.c
787
DEBUGOUT("Flashless no PBA string\n");
sys/dev/netif/ig_hal/e1000_nvm.c
792
DEBUGOUT("PBA string buffer was null\n");
sys/dev/netif/ig_hal/e1000_nvm.c
798
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
804
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
813
DEBUGOUT("NVM PBA number is not stored as string\n");
sys/dev/netif/ig_hal/e1000_nvm.c
817
DEBUGOUT("PBA string buffer too small\n");
sys/dev/netif/ig_hal/e1000_nvm.c
849
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
854
DEBUGOUT("NVM PBA number section invalid length\n");
sys/dev/netif/ig_hal/e1000_nvm.c
859
DEBUGOUT("PBA string buffer too small\n");
sys/dev/netif/ig_hal/e1000_nvm.c
870
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
899
DEBUGOUT("PBA buffer size was null\n");
sys/dev/netif/ig_hal/e1000_nvm.c
905
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
911
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
923
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ig_hal/e1000_nvm.c
928
DEBUGOUT("NVM PBA number section invalid length\n");
sys/dev/netif/ig_hal/e1000_osdep.h
57
#define DEBUGOUT1(S, args...) DEBUGOUT(S, ##args)
sys/dev/netif/ig_hal/e1000_osdep.h
58
#define DEBUGOUT2(S, args...) DEBUGOUT(S, ##args)
sys/dev/netif/ig_hal/e1000_osdep.h
59
#define DEBUGOUT3(S, args...) DEBUGOUT(S, ##args)
sys/dev/netif/ig_hal/e1000_osdep.h
60
#define DEBUGOUT7(S, args...) DEBUGOUT(S, ##args)
sys/dev/netif/ig_hal/e1000_osdep.h
61
#define DEBUGFUNC(F) DEBUGOUT(F "\n")
sys/dev/netif/ig_hal/e1000_phy.c
1064
DEBUGOUT("Error resetting the PHY.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1183
DEBUGOUT("Error committing the PHY changes\n");
sys/dev/netif/ig_hal/e1000_phy.c
1241
DEBUGOUT("Error committing the PHY changes\n");
sys/dev/netif/ig_hal/e1000_phy.c
1332
DEBUGOUT("Error committing the PHY changes\n");
sys/dev/netif/ig_hal/e1000_phy.c
1348
DEBUGOUT("Error committing the PHY changes\n");
sys/dev/netif/ig_hal/e1000_phy.c
1377
DEBUGOUT("Error resetting the PHY.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1393
DEBUGOUT("Error Disabling LPLU D3\n");
sys/dev/netif/ig_hal/e1000_phy.c
1402
DEBUGOUT("Error Disabling LPLU D0\n");
sys/dev/netif/ig_hal/e1000_phy.c
1521
DEBUGOUT("Advertise 10mb Half duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1527
DEBUGOUT("Advertise 10mb Full duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1533
DEBUGOUT("Advertise 100mb Half duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1539
DEBUGOUT("Advertise 100mb Full duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1545
DEBUGOUT("Advertise 1000mb Half duplex request denied!\n");
sys/dev/netif/ig_hal/e1000_phy.c
1549
DEBUGOUT("Advertise 1000mb Full duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1603
DEBUGOUT("Flow control param set incorrectly\n");
sys/dev/netif/ig_hal/e1000_phy.c
1648
DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
sys/dev/netif/ig_hal/e1000_phy.c
1651
DEBUGOUT("Error Setting up Auto-Negotiation\n");
sys/dev/netif/ig_hal/e1000_phy.c
1654
DEBUGOUT("Restarting Auto-Neg\n");
sys/dev/netif/ig_hal/e1000_phy.c
1674
DEBUGOUT("Error while waiting for autoneg to complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
1711
DEBUGOUT("Forcing Speed and Duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1714
DEBUGOUT("Error Forcing Speed and Duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
1728
DEBUGOUT("Valid link established!!!\n");
sys/dev/netif/ig_hal/e1000_phy.c
1732
DEBUGOUT("Unable to establish link!!!\n");
sys/dev/netif/ig_hal/e1000_phy.c
1784
DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1792
DEBUGOUT("Link taking longer than expected.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1856
DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1882
DEBUGOUT("Link taking longer than expected.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1987
DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n");
sys/dev/netif/ig_hal/e1000_phy.c
1995
DEBUGOUT("Link taking longer than expected.\n");
sys/dev/netif/ig_hal/e1000_phy.c
2044
DEBUGOUT("Half Duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
2048
DEBUGOUT("Full Duplex\n");
sys/dev/netif/ig_hal/e1000_phy.c
2056
DEBUGOUT("Forcing 100mb\n");
sys/dev/netif/ig_hal/e1000_phy.c
2060
DEBUGOUT("Forcing 10mb\n");
sys/dev/netif/ig_hal/e1000_phy.c
2641
DEBUGOUT("Phy info is only valid for copper media\n");
sys/dev/netif/ig_hal/e1000_phy.c
2650
DEBUGOUT("Phy info is only valid if link is up\n");
sys/dev/netif/ig_hal/e1000_phy.c
2720
DEBUGOUT("Phy info is only valid if link is up\n");
sys/dev/netif/ig_hal/e1000_phy.c
2782
DEBUGOUT("Phy info is only valid if link is up\n");
sys/dev/netif/ig_hal/e1000_phy.c
2914
DEBUGOUT("Running IGP 3 PHY init script\n");
sys/dev/netif/ig_hal/e1000_phy.c
323
DEBUGOUT("MDI Read did not complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
327
DEBUGOUT("MDI Error\n");
sys/dev/netif/ig_hal/e1000_phy.c
3343
DEBUGOUT("Could not set Port Control page\n");
sys/dev/netif/ig_hal/e1000_phy.c
3397
DEBUGOUT("Could not set Port Control page\n");
sys/dev/netif/ig_hal/e1000_phy.c
3455
DEBUGOUT("Could not enable PHY wakeup reg access\n");
sys/dev/netif/ig_hal/e1000_phy.c
3810
DEBUGOUT("Could not write the Address Offset port register\n");
sys/dev/netif/ig_hal/e1000_phy.c
3821
DEBUGOUT("Could not access the Data port register\n");
sys/dev/netif/ig_hal/e1000_phy.c
389
DEBUGOUT("MDI Write did not complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
393
DEBUGOUT("MDI Error\n");
sys/dev/netif/ig_hal/e1000_phy.c
3931
DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n");
sys/dev/netif/ig_hal/e1000_phy.c
3939
DEBUGOUT("Link taking longer than expected.\n");
sys/dev/netif/ig_hal/e1000_phy.c
3972
DEBUGOUT("Phy info is only valid if link is up\n");
sys/dev/netif/ig_hal/e1000_phy.c
4257
DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n");
sys/dev/netif/ig_hal/e1000_phy.c
446
DEBUGOUT("I2CCMD Read did not complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
450
DEBUGOUT("I2CCMD Error bit set\n");
sys/dev/netif/ig_hal/e1000_phy.c
505
DEBUGOUT("I2CCMD Write did not complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
509
DEBUGOUT("I2CCMD Error bit set\n");
sys/dev/netif/ig_hal/e1000_phy.c
538
DEBUGOUT("I2CCMD command address exceeds upper limit\n");
sys/dev/netif/ig_hal/e1000_phy.c
559
DEBUGOUT("I2CCMD Read did not complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
563
DEBUGOUT("I2CCMD Error bit set\n");
sys/dev/netif/ig_hal/e1000_phy.c
593
DEBUGOUT("I2CCMD command address exceeds upper limit\n");
sys/dev/netif/ig_hal/e1000_phy.c
634
DEBUGOUT("I2CCMD Write did not complete\n");
sys/dev/netif/ig_hal/e1000_phy.c
638
DEBUGOUT("I2CCMD Error bit set\n");
sys/dev/netif/ig_hal/e1000_vf.c
231
DEBUGOUT("1000 Mbs, ");
sys/dev/netif/ig_hal/e1000_vf.c
234
DEBUGOUT("100 Mbs, ");
sys/dev/netif/ig_hal/e1000_vf.c
237
DEBUGOUT("10 Mbs, ");
sys/dev/netif/ig_hal/e1000_vf.c
242
DEBUGOUT("Full Duplex\n");
sys/dev/netif/ig_hal/e1000_vf.c
245
DEBUGOUT("Half Duplex\n");
sys/dev/netif/ig_hal/e1000_vf.c
268
DEBUGOUT("Issuing a function level reset to MAC\n");
sys/dev/netif/ix/ixgbe_82598.c
1172
DEBUGOUT("EEPROM read did not pass.\n");
sys/dev/netif/ix/ixgbe_82598.c
433
DEBUGOUT("Invalid water mark configuration\n");
sys/dev/netif/ix/ixgbe_82598.c
511
DEBUGOUT("Flow control param set incorrectly\n");
sys/dev/netif/ix/ixgbe_82598.c
587
DEBUGOUT("Autonegotiation did not complete.\n");
sys/dev/netif/ix/ixgbe_82598.c
626
DEBUGOUT("Link was indicated but link is down\n");
sys/dev/netif/ix/ixgbe_82598.c
892
DEBUGOUT("Reset polling failed to complete.\n");
sys/dev/netif/ix/ixgbe_82599.c
1103
DEBUGOUT("Reset polling failed to complete.\n");
sys/dev/netif/ix/ixgbe_82599.c
1245
DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n");
sys/dev/netif/ix/ixgbe_82599.c
1284
DEBUGOUT("Flow Director Signature poll time exceeded!\n");
sys/dev/netif/ix/ixgbe_82599.c
1336
DEBUGOUT("Flow Director poll time exceeded!\n");
sys/dev/netif/ix/ixgbe_82599.c
1568
DEBUGOUT(" Error on flow type input\n");
sys/dev/netif/ix/ixgbe_82599.c
1720
DEBUGOUT(" bucket hash should always be 0 in mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1729
DEBUGOUT(" Error on vm pool mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1738
DEBUGOUT(" Error on src/dst port mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1744
DEBUGOUT(" Error on flow type mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1765
DEBUGOUT(" Error on VLAN mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1777
DEBUGOUT(" Error on flexible byte mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1793
DEBUGOUT(" Error on inner_mac byte mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1808
DEBUGOUT(" Error on TNI/VNI byte mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1819
DEBUGOUT(" Error on tunnel type byte mask\n");
sys/dev/netif/ix/ixgbe_82599.c
1957
DEBUGOUT("Flow Director command did not complete!\n");
sys/dev/netif/ix/ixgbe_82599.c
1985
DEBUGOUT("Flow Director command did not complete!\n");
sys/dev/netif/ix/ixgbe_82599.c
2031
DEBUGOUT(" Error on src/dst port\n");
sys/dev/netif/ix/ixgbe_82599.c
2038
DEBUGOUT(" Error on src/dst port\n");
sys/dev/netif/ix/ixgbe_82599.c
2050
DEBUGOUT(" Error on flow type input\n");
sys/dev/netif/ix/ixgbe_82599.c
220
DEBUGOUT("sfp module setup not complete\n");
sys/dev/netif/ix/ixgbe_82599.c
2509
DEBUGOUT("auto negotiation not completed\n");
sys/dev/netif/ix/ixgbe_82599.c
2560
DEBUGOUT("Driver can't access resource,"
sys/dev/netif/ix/ixgbe_82599.c
2618
DEBUGOUT("Driver can't access resource,"
sys/dev/netif/ix/ixgbe_82599.c
659
DEBUGOUT("Autoneg did not complete.\n");
sys/dev/netif/ix/ixgbe_82599.c
761
DEBUGOUT("Invalid fixed module speed\n");
sys/dev/netif/ix/ixgbe_82599.c
876
DEBUGOUT("Smartspeed has downgraded the link speed "
sys/dev/netif/ix/ixgbe_82599.c
986
DEBUGOUT("Autoneg did not complete.\n");
sys/dev/netif/ix/ixgbe_common.c
1640
DEBUGOUT("Eeprom read timed out\n");
sys/dev/netif/ix/ixgbe_common.c
1744
DEBUGOUT("Eeprom write EEWR timed out\n");
sys/dev/netif/ix/ixgbe_common.c
1752
DEBUGOUT("Eeprom write EEWR timed out\n");
sys/dev/netif/ix/ixgbe_common.c
1847
DEBUGOUT("Could not acquire EEPROM grant\n");
sys/dev/netif/ix/ixgbe_common.c
1896
DEBUGOUT("Driver can't access the Eeprom - SMBI Semaphore "
sys/dev/netif/ix/ixgbe_common.c
2010
DEBUGOUT("SPI EEPROM Status error\n");
sys/dev/netif/ix/ixgbe_common.c
2225
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2234
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2243
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2252
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2287
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2299
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2333
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_common.c
2498
DEBUGOUT("Overriding MAC Address in RAR[0]\n");
sys/dev/netif/ix/ixgbe_common.c
2526
DEBUGOUT(" Clearing MTA\n");
sys/dev/netif/ix/ixgbe_common.c
2566
DEBUGOUT("ixgbe_add_uc_addr Complete\n");
sys/dev/netif/ix/ixgbe_common.c
2612
DEBUGOUT(" Adding the secondary addresses:\n");
sys/dev/netif/ix/ixgbe_common.c
2620
DEBUGOUT(" Entering address overflow promisc mode\n");
sys/dev/netif/ix/ixgbe_common.c
2628
DEBUGOUT(" Leaving address overflow promisc mode\n");
sys/dev/netif/ix/ixgbe_common.c
2635
DEBUGOUT("ixgbe_update_uc_addr_list_generic Complete\n");
sys/dev/netif/ix/ixgbe_common.c
2671
DEBUGOUT("MC filter type param set incorrectly\n");
sys/dev/netif/ix/ixgbe_common.c
2744
DEBUGOUT(" Clearing MTA\n");
sys/dev/netif/ix/ixgbe_common.c
2750
DEBUGOUT(" Adding the multicast addresses:\n");
sys/dev/netif/ix/ixgbe_common.c
2763
DEBUGOUT("ixgbe_update_mc_addr_list_generic Complete\n");
sys/dev/netif/ix/ixgbe_common.c
2832
DEBUGOUT("Invalid water mark configuration\n");
sys/dev/netif/ix/ixgbe_common.c
2971
DEBUGOUT("Flow Control = FULL.\n");
sys/dev/netif/ix/ixgbe_common.c
2974
DEBUGOUT("Flow Control=RX PAUSE frames only\n");
sys/dev/netif/ix/ixgbe_common.c
2979
DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
sys/dev/netif/ix/ixgbe_common.c
2983
DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
sys/dev/netif/ix/ixgbe_common.c
2986
DEBUGOUT("Flow Control = NONE.\n");
sys/dev/netif/ix/ixgbe_common.c
3011
DEBUGOUT("Auto-Negotiation did not complete or timed out\n");
sys/dev/netif/ix/ixgbe_common.c
3046
DEBUGOUT("Auto-Negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_common.c
3053
DEBUGOUT("Link partner is not AN enabled\n");
sys/dev/netif/ix/ixgbe_common.c
3249
DEBUGOUT("GIO Master Disable bit didn't clear - requesting resets\n");
sys/dev/netif/ix/ixgbe_common.c
3379
DEBUGOUT("Rx unit being enabled before security "
sys/dev/netif/ix/ixgbe_common.c
3904
DEBUGOUT(" Clearing UTA\n");
sys/dev/netif/ix/ixgbe_common.c
4528
DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
sys/dev/netif/ix/ixgbe_common.c
4534
DEBUGOUT("Buffer length failure, not aligned to dword");
sys/dev/netif/ix/ixgbe_common.c
4645
DEBUGOUT("Buffer not large enough for reply message.\n");
sys/dev/netif/ix/ixgbe_common.c
5351
DEBUGOUT("Unexpected media type.\n");
sys/dev/netif/ix/ixgbe_common.c
5402
DEBUGOUT("Unexpected media type.\n");
sys/dev/netif/ix/ixgbe_common.c
5474
DEBUGOUT("Invalid fixed module speed\n");
sys/dev/netif/ix/ixgbe_common.c
5483
DEBUGOUT("Failed to read Rx Rate Select RS0\n");
sys/dev/netif/ix/ixgbe_common.c
5493
DEBUGOUT("Failed to write Rx Rate Select RS0\n");
sys/dev/netif/ix/ixgbe_common.c
5502
DEBUGOUT("Failed to read Rx Rate Select RS1\n");
sys/dev/netif/ix/ixgbe_common.c
5512
DEBUGOUT("Failed to write Rx Rate Select RS1\n");
sys/dev/netif/ix/ixgbe_common.c
654
DEBUGOUT("PBA string buffer was null\n");
sys/dev/netif/ix/ixgbe_common.c
660
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ix/ixgbe_common.c
666
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ix/ixgbe_common.c
676
DEBUGOUT("NVM PBA number is not stored as string\n");
sys/dev/netif/ix/ixgbe_common.c
680
DEBUGOUT("PBA string buffer too small\n");
sys/dev/netif/ix/ixgbe_common.c
712
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ix/ixgbe_common.c
717
DEBUGOUT("NVM PBA number section invalid length\n");
sys/dev/netif/ix/ixgbe_common.c
723
DEBUGOUT("PBA string buffer too small\n");
sys/dev/netif/ix/ixgbe_common.c
734
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ix/ixgbe_common.c
761
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ix/ixgbe_common.c
764
DEBUGOUT("NVM Not supported\n");
sys/dev/netif/ix/ixgbe_common.c
771
DEBUGOUT("NVM Read Error\n");
sys/dev/netif/ix/ixgbe_osdep.h
63
#define DEBUGFUNC(F) DEBUGOUT(F);
sys/dev/netif/ix/ixgbe_phy.c
1185
DEBUGOUT("PHY reset did not complete.\n");
sys/dev/netif/ix/ixgbe_phy.c
1215
DEBUGOUT("DATA:\n");
sys/dev/netif/ix/ixgbe_phy.c
1237
DEBUGOUT("CONTROL:\n");
sys/dev/netif/ix/ixgbe_phy.c
1239
DEBUGOUT("EOL\n");
sys/dev/netif/ix/ixgbe_phy.c
1242
DEBUGOUT("SOL\n");
sys/dev/netif/ix/ixgbe_phy.c
1244
DEBUGOUT("Bad control value\n");
sys/dev/netif/ix/ixgbe_phy.c
1250
DEBUGOUT("Bad control type\n");
sys/dev/netif/ix/ixgbe_phy.c
1553
DEBUGOUT("SFP+ module not supported\n");
sys/dev/netif/ix/ixgbe_phy.c
173
DEBUGOUT("I2C byte read combined error - Retrying.\n");
sys/dev/netif/ix/ixgbe_phy.c
175
DEBUGOUT("I2C byte read combined error.\n");
sys/dev/netif/ix/ixgbe_phy.c
1806
DEBUGOUT("QSFP module not supported\n");
sys/dev/netif/ix/ixgbe_phy.c
1898
DEBUGOUT("SFP+ module not supported\n");
sys/dev/netif/ix/ixgbe_phy.c
1911
DEBUGOUT("No matching SFP+ module found\n");
sys/dev/netif/ix/ixgbe_phy.c
2073
DEBUGOUT("I2C byte read error - Retrying.\n");
sys/dev/netif/ix/ixgbe_phy.c
2075
DEBUGOUT("I2C byte read error.\n");
sys/dev/netif/ix/ixgbe_phy.c
2177
DEBUGOUT("I2C byte write error - Retrying.\n");
sys/dev/netif/ix/ixgbe_phy.c
2179
DEBUGOUT("I2C byte write error.\n");
sys/dev/netif/ix/ixgbe_phy.c
238
DEBUGOUT("I2C byte write combined error - Retrying.\n");
sys/dev/netif/ix/ixgbe_phy.c
2390
DEBUGOUT("I2C ack was not received.\n");
sys/dev/netif/ix/ixgbe_phy.c
240
DEBUGOUT("I2C byte write combined error.\n");
sys/dev/netif/ix/ixgbe_phy.c
612
DEBUGOUT("PHY address command did not complete, returning IXGBE_ERR_PHY\n");
sys/dev/netif/ix/ixgbe_phy.c
642
DEBUGOUT("PHY read command didn't complete, returning IXGBE_ERR_PHY\n");
sys/dev/netif/ix/ixgbe_x540.c
521
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x540.c
535
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x540.c
545
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x540.c
556
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x540.c
591
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x540.c
652
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x540.c
696
DEBUGOUT("Flash update time out\n");
sys/dev/netif/ix/ixgbe_x540.c
705
DEBUGOUT("Flash update complete\n");
sys/dev/netif/ix/ixgbe_x540.c
707
DEBUGOUT("Flash update time out\n");
sys/dev/netif/ix/ixgbe_x540.c
719
DEBUGOUT("Flash update complete\n");
sys/dev/netif/ix/ixgbe_x540.c
721
DEBUGOUT("Flash update time out\n");
sys/dev/netif/ix/ixgbe_x540.c
795
DEBUGOUT("Failed to get NVM access and register semaphore, returning IXGBE_ERR_SWFW_SYNC\n");
sys/dev/netif/ix/ixgbe_x540.c
821
DEBUGOUT("Failed to get NVM sempahore and register semaphore while forcefully ignoring FW sempahore bit(s) and setting SW semaphore bit(s), returning IXGBE_ERR_SWFW_SYNC\n");
sys/dev/netif/ix/ixgbe_x540.c
846
DEBUGOUT("Resource not released by other SW, returning IXGBE_ERR_SWFW_SYNC\n");
sys/dev/netif/ix/ixgbe_x540.c
850
DEBUGOUT("Returning error IXGBE_ERR_SWFW_SYNC\n");
sys/dev/netif/ix/ixgbe_x550.c
1253
DEBUGOUT("Returning IXGBE_ERR_TOKEN_RETRY\n");
sys/dev/netif/ix/ixgbe_x550.c
1283
DEBUGOUT("Put PHY Token host interface command failed");
sys/dev/netif/ix/ixgbe_x550.c
1644
DEBUGOUT("Auto-negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_x550.c
1662
DEBUGOUT("Auto-negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_x550.c
2456
DEBUGOUT("Returning from reset HW due to PHY init failure\n");
sys/dev/netif/ix/ixgbe_x550.c
2519
DEBUGOUT("Reset polling failed to complete.\n");
sys/dev/netif/ix/ixgbe_x550.c
2766
DEBUGOUT("Invalid NW_MNG_IF_SEL.MDIO_PHY_ADD value\n");
sys/dev/netif/ix/ixgbe_x550.c
3176
DEBUGOUT("EEPROM read buffer - semaphore failed\n");
sys/dev/netif/ix/ixgbe_x550.c
3201
DEBUGOUT("Host interface command failed\n");
sys/dev/netif/ix/ixgbe_x550.c
3280
DEBUGOUT("write ee hostif failed to get semaphore");
sys/dev/netif/ix/ixgbe_x550.c
3307
DEBUGOUT("EEPROM write buffer - semaphore failed\n");
sys/dev/netif/ix/ixgbe_x550.c
3316
DEBUGOUT("Eeprom buffered write failed\n");
sys/dev/netif/ix/ixgbe_x550.c
3353
DEBUGOUT("Failed to read EEPROM image\n");
sys/dev/netif/ix/ixgbe_x550.c
3390
DEBUGOUT("Failed to read EEPROM image\n");
sys/dev/netif/ix/ixgbe_x550.c
3425
DEBUGOUT("Failed to read EEPROM image\n");
sys/dev/netif/ix/ixgbe_x550.c
3515
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x550.c
3567
DEBUGOUT("EEPROM read failed\n");
sys/dev/netif/ix/ixgbe_x550.c
4022
DEBUGOUT("Auto-Negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_x550.c
4035
DEBUGOUT("Auto-Negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_x550.c
4044
DEBUGOUT("Auto-Negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_x550.c
4108
DEBUGOUT("Auto-Negotiation did not complete\n");
sys/dev/netif/ix/ixgbe_x550.c
4161
DEBUGOUT("Auto-Negotiation did not complete\n");